The field of chemical sensing is becoming ever more dependent upon novel materials. Polymers, crystals, glasses, particles, and nanostructures have made a profound impact and have endowed modern sensory systems with superior performance. Electronic polymers have emerged as one of the most important classes of transduction materials; they readily transform a chemical signal into an easily measured electrical or optical event. Although our group reviewed this field in 2000,1 the high levels of activity and the impact of these methods now justify a subsequent review as part of this special issue. In this review we restrict our discussions to purely fluorescence-based methods using conjugated polymers (CPs). We further confine our detailed coverage to articles published since our previous review and will only detail earlier research in this Introduction to illustrate fundamental concepts and terminology that underpin the recent literature.

Chemical sensors based on amplifying fluorescent conjugated polymers.

Organometallic chemistry on silicon and germanium surfaces.

Conducting organic polymers have found two main kinds of application in electronics so far: as materials for construction of various devices and as selective layers in chemical sensors. In either case, interaction with ambient gases is critical. It may compromise the performance of a device based on conducting polymers, whereas it is beneficial in a sensor. Conductivity has been the primary property of interest. Work function--related to conductivity, but in principle a different property--has received only scant attention. Our aim here is to discuss the usability of conducting polymers in both types of electronic applications in light of these two parameters.

Conducting polymers in electronic chemical sensors.

Radiative decay engineering: biophysical and biomedical applications.

Conventional approaches to chemical sensors have
traditionally made use of a “lock-and-key” design,
wherein a specific receptor is synthesized in order to
strongly and highly selectively bind the analyte of
interest.1-6 A related approach involves exploiting a
general physicochemical effect selectively toward a
single analyte, such as the use of the ionic effect in
the construction of a pH electrode. In the first
approach, selectivity is achieved through recognition
of the analyte at the receptor site, and in the second,
selectivity is achieved through the transduction
process in which the method of detection dictates
which species are sensed. Such approaches are appropriate
when a specific target compound is to be
identified in the presence of controlled backgrounds
and interferences. However, this type of approach
requires the synthesis of a separate, highly selective
sensor for each analyte to be detected. In addition,
this type of approach is not particularly useful for
analyzing, classifying, or assigning human value
judgments to the composition of complex vapor
mixtures such as perfumes, beers, foods, mixtures of
solvents, etc.

/pdf/cross-reactive-chemical-sensor-arrays-38dz1buu0b.pdf

Cross-reactive chemical sensor arrays.

In this paper, we report on the preparation of novel cross-reactive optical microsensors for high-speed detection of low-level explosives and explosives-like vapors. Porous silica microspheres with an incorporated environmentally sensitive fluorescent dye are employed in high-density sensor arrays to monitor fluorescence changes during nitroaromatic compound (NAC) vapor exposure. The porous silica-based sensor materials have good adsorption characteristics, high surface areas, and surface functionality to help maximize analyte-dye interactions. These interactions occur immediately upon vapor exposure, i.e., in less than 200 ms and are monitored with a high-speed charge-coupled device camera to produce characteristic and reproducible vapor response profiles for individual sensors within an array. Employing thousands of identical microsensors permits sensor responses to be combined, which significantly reduces sensor noise and enhances detection limits. Normalized response profiles for 1,3-dinitrobenzene (1,3-DNB) are independent of analyte concentration, analyte exposure time, or sensor age for an array of one sensor type. Explosives-like NACs such as 2,4-dinitrotoluene and DNB are detected at low part-per-billion levels in seconds. Sensor-analyte profiles of some sensor types are more sensitive to low-level NAC vapor even when in a higher organic vapor background. We show that single-element arrays permit the detection of low-level nitroaromatic compound vapors because of sensor-to-sensor reproducibility and signal averaging.

High-Speed Fluorescence Detection of Explosives-like Vapors

Cross-Reactive Chemical Sensor Arrays

A fiber optic bead-based sensor array platform has been employed to discriminate between six different odors and air carrier gas. Six different bead sensor types, with over 250 replicates of each, were monitored before, during, and after odor exposure to produce time-dependent fluorescence response patterns that were unique for each sensor−analyte combination. A total of 2683 sensors were analyzed with respect to changes in their fluorescence, and signals from identical sensor beads were averaged to improve signal-to-noise ratios. Analyte classification rates of 100% were achieved for three complex (coffee bean) odors and three pure (simple) odors (toluene, acetone, 1,3-dinitrotoluene) measured at their highest relative concentrations. When lower odor concentrations were employed, the system exhibited better than 85% classification rates for analyte discrimination. Sensor response repeatability to these odor stimuli has also been quantified statistically, which is vital in defining the detection limit of ...

Optical multibead arrays for simple and complex odor discrimination.

A field-deployable instrument has been developed to detect low-level 2,4-dinitrotoluene (2,4-DNT) vapors. The system is based on previously developed artificial nose technology and employs an array of sensory materials attached to the distal tips of an optical fiber bundle. Both semiselective and nonspecific, cross-reactive sensors were employed. Each sensor within the array responds differentially to vapor exposure so the array's fluorescence response patterns are unique for each analyte. The instrument is computationally “trained” to discriminate target response patterns from nontarget and background environments. This detection system has been applied to detect 2,4-DNT, an analyte commonly detected on the soil surface above buried 2,4,6-trinitrotoluene (TNT) land mines, in spiked soil and aqueous and ground samples. The system has been characterized and demonstrated the ability to detect 120 ppb 2,4-DNT vapor in blind (unknown) humidified samples during a supervised field test.

Keith J. Albert

Papers

Cross-reactive chemical sensor arrays.

High-Speed Fluorescence Detection of Explosives-like Vapors

Cross-Reactive Chemical Sensor Arrays

Optical multibead arrays for simple and complex odor discrimination.

Field-deployable sniffer for 2,4-dinitrotoluene detection.