An apparatus may include a semiconductor chip and a fluidics assembly. The semiconductor chip has an array of wells and an array of sensors and each sensor of the array of sensors is in fluid communication with a well of the array of wells. The fluidics assembly is located on top of the semiconductor chip and is configured to deliver fluids to the semiconductor chip. The fluidics assembly includes a flow expansion chamber configured to introduce the fluids, an outlet portion configured to pipe out the fluids, and a flow chamber portion. The flow chamber portion is configured to allow the fluids to flow from the flow expansion chamber to the outlet portion and to allow the fluids to interact along the way with material in the array of wells. The flow expansion chamber has a curved wall at the top or bottom so that the height of the flow expansion chamber at the center is less than at the walls that restrict the fluids to the left and right.

Methods and apparatus for measuring analytes using large scale fet arrays

The idea of wireless power transfer (WPT) has been around since the inception of electricity. In the late 19th century, Nikola Tesla described the freedom to transfer energy between two points without the need for a physical connection to a power source as an ?all-surpassing importance to man? [1]. A truly wireless device, capable of being remotely powered, not only allows the obvious freedom of movement but also enables devices to be more compact by removing the necessity of a large battery. Applications could leverage this reduction in size and weight to increase the feasibility of concepts such as paper-thin, flexible displays [2], contact-lens-based augmented reality [3], and smart dust [4], among traditional point-to-point power transfer applications. While several methods of wireless power have been introduced since Tesla?s work, including near-field magnetic resonance and inductive coupling, laser-based optical power transmission, and far-field RF/microwave energy transmission, only RF/microwave and laser-based systems are truly long-range methods. While optical power transmission certainly has merit, its mechanisms are outside of the scope of this article and will not be discussed.

Harvesting Wireless Power: Survey of Energy-Harvester Conversion Efficiency in Far-Field, Wireless Power Transfer Systems

Methods and apparatus relating to FET arrays including large FET arrays for monitoring chemical and/or biological reactions such as nucleic acid sequencing-by-synthesis reactions. Some methods provided herein relate to improving signal (and also signal to noise ratio) from released hydrogen ions during nucleic acid sequencing reactions.

Methods and apparatus for measuring analytes

Random access operation is performed under a communication environment in which a plurality of communication modes having different transmission rate coexist with small overhead. A high-grade communication station spoofs information of a packet length and a rate in a decoding portion so that a value of (packet length)/(rate) corresponds to a duration where the communication is hoped to be stopped. The other station receiving the spoofed information receives the rest of the packet with the designated rate during the interval designated by the value of (packet length)/(rate). In this case, the packet length and the rate are not those of actually transmitted packet so that this packet is discarded.

Wireless communication system, wireless communication apparatus, wireless communication method, and computer program

Methods and apparatuses relating to large scale FET arrays for analyte detection and measurement are provided. ChemFET (e.g., ISFET) arrays may be fabricated using conventional CMOS processing techniques based on improved FET pixel and array designs that increase measurement sensitivity and accuracy, and at the same time facilitate significantly small pixel sizes and dense arrays. Improved array control techniques provide for rapid data acquisition from large and dense arrays. Such arrays may be employed to detect a presence and/or concentration changes of various analyte types in a wide variety of chemical and/or biological processes.

Methods and apparatus for detecting molecular interactions using FET arrays

The present invention provides a high/low frequency dual wireless location detection and information transmission system which is high in reliability and maintainability, and can be easily installed. A leakage coaxial inner conductor and a conductor line provided in parallel are short-circuited at an end, a single leakage coaxial operation and a loop operation of the inner conductor and the conductor line are performed at the same time, the ID of a tag is communicated using magnetic fields which locally exist near the conductor line by the loop, and wireless position detection and information communications which are less affected by the influence of ambient environments due to electromagnetic waves in a closed area are realized by open-type lines.

Low/high frequency shared leakage antenna, base station apparatus and close-range detection system using the antenna

When supplying a power from a base station to a terminal station on radio and a distance from a base station to a terminal station is long, it becomes impossible for the terminal station to rectify the power. The feature of the present invention is found in a wireless communication system in which the peak value and duty ratio of a transmission power are controlled simultaneously, keeping the transmission power of a base station below a fixed value, thereby allowing a voltage to be applied to a diode, which is a component of a rectifier circuit possessed by a terminal station, always in excess of a threshold voltage of the diode, and energy is exchanged between the base station and the terminal station below a limit power.

Transmitter and wireless system using the same

In order to offer a tunable slot antenna capable of varying an impedance matching center frequency thereof, there is provided a coaxial resonant slot antenna for supplying RF power to a strip conductor placed in a flat conductive cubic with a slot formed in its upper surface and electrically insulated from the flat conductive cubic, wherein a variable capacitor is electrically connected between one point lying in the neighborhood thereof including an end far from a RF power connection point on the strip conductor and a side wall of the flat conductive cubic, and a d.c. voltage to be applied across the variable capacitor is supplied to the connection point.

Tunable slot antenna

A coaxial resonant slot antenna having a novel structure is provided to further reduce the dimensions of radio terminals incorporating such an antenna. Also provided are a novel method of fabricating such a coaxial resonant slot antenna and a radio terminal having a novel structure using such a coaxial resonant slot antenna. An entire strip conductor is arranged inside a flat conductive cubic such that the strip conductor is insulated from the conductive cubic. A connection point between the strip conductor and a radio frequency transmission line is provided at a position about 1/4 of wavelength away from one end of the strip conductor. A slot is shaped into a narrow rectangle, a generally upside-down "U", or a generally upside-down "U" having another slot on each end. It is desired that the center slot crosses the strip conductor along the length thereof and in the height direction thereof, the distance between the ends being equivalent to about 1/2 of wavelength used. The radio terminal has a plurality of antennas associated with the present invention arranged on a plurality of surfaces and provides a connection mechanism for varying the number of antennas to be used in the talk mode and the standby mode.

Coaxial resonant slot antenna, a method of manufacturing thereof, and a radio terminal

The invention provides a small multimode antenna capable of commonly using a single feeding point at a plurality of frequencies. The antenna includes a radiating conductor 1 disposed above a ground conductor 6 and distributed-constant circuits 2 and 3 coupled to the radiating conductor. Each of the distributed-constant circuits is constructed by a transmission line and has a branch. One end of the radiating conductor and one end of the distributed-constant circuit 2 are connected to each other to be a connection point and, further, the other end of the radiating conductor and one end of the distributed-constant circuit 3 are connected to each other. The connection point is a single feeding point 9 using the ground conductor as an earth. The distributed-constant circuits 2 and 3 are designed as an equivalent circuit in which different stubs are connected in parallel with a transmission line, and impedance matching at a plurality of frequencies is realized at the feeding point.

Ken Takei

Papers

Low/high frequency shared leakage antenna, base station apparatus and close-range detection system using the antenna

Transmitter and wireless system using the same

Tunable slot antenna

Coaxial resonant slot antenna, a method of manufacturing thereof, and a radio terminal

Antenna, method for manufacturing the antenna, and communication apparatus including the antenna