Many applications, including laser (LIDAR) mapping, free-space optical communications, and spatially resolved optical sensors, demand compact, robust solutions to steering an optical beam. Fine target addressability (high steering resolution) in these systems requires simultaneously achieving a wide steering angle and a small beam divergence, but this is difficult due to the fundamental trade-offs between resolution and steering range. So far, to our knowledge, chip-based two-axis optical phased arrays have achieved a resolution of no more than 23 resolvable spots in the phased-array axis. Here we report, using non-uniform emitter spacing on a large-scale emitter array, a dramatically higher-performance two-axis steerable optical phased array fabricated in a 300 mm CMOS facility with over 500 resolvable spots and 80° steering in the phased-array axis (measurement limited) and a record small divergence in both axes (0.14°). Including the demonstrated steering range in the other (wavelength-controlled) axis, this amounts to two-dimensional beam steering to more than 60,000 resolvable points.

High-resolution aliasing-free optical beam steering

Macroelectronic substrate materials incorporating nanowires are described. These are used to provide underlying electronic elements (e.g., transistors and the like) for a variety of different applications. Methods for making the macroelectronic substrate materials are disclosed. One application is for transmission an reception of RF signals in small, lightweight sensors. Such sensors can be configured in a distributed sensor network to provide security monitoring. Furthermore, a method and apparatus for a radio frequency identification (RFID) tag is described. The RFID tag includes an antenna and a beam-steering array. The beam-steering array includes a plurality of tunable elements. A method and apparatus for an acoustic cancellation device and for an adjustable phase shifter that are enabled by nanowires are also described.

Applications of nano-enabled large area macroelectronic substrates incorporating nanowires and nanowire composites

Nonlinear optics of liquid crystalline materials

High frequency interconnect structures, electronic assemblies that utilize high frequency interconnect structures, and methods of operating the same. The high frequency interconnect structures include a plurality of dielectric waveguides and are configured to communicatively connect a plurality of transmitters with a plurality of receivers and to convey a plurality of signals therebetween. The plurality of signals may include a plurality of electromagnetic waves and may have a frequency of at least 200 GHz. The high frequency interconnect structures further may be configured to decrease a potential for crosstalk between a first signal that is conveyed by a first dielectric waveguide of the plurality of dielectric waveguides and a second signal that is conveyed by a second dielectric waveguide of the plurality of dielectric waveguides, such as through control of a passband of the first dielectric waveguide relative to the second dielectric waveguide and/or the use of a crosstalk mitigation structure.

High frequency interconnect structures, electronic assemblies that utilize high frequency interconnect structures, and methods of operating the same

Abstract Technologies for efficient generation and fast scanning of narrow free-space laser beams find major applications in three-dimensional (3D) imaging and mapping, like Lidar for remote sensing and navigation, and secure free-space optical communications. The ultimate goal for such a system is to reduce its size, weight, and power consumption, so that it can be mounted on, e.g. drones and autonomous cars. Moreover, beam scanning should ideally be done at video frame rates, something that is beyond the capabilities of current opto-mechanical systems. Photonic integrated circuit (PIC) technology holds the promise of achieving low-cost, compact, robust and energy-efficient complex optical systems. PICs integrate, for example, lasers, modulators, detectors, and filters on a single piece of semiconductor, typically silicon or indium phosphide, much like electronic integrated circuits. This technology is maturing fast, driven by high-bandwidth communications applications, and mature fabrication facilities. State-of-the-art commercial PICs integrate hundreds of elements, and the integration of thousands of elements has been shown in the laboratory. Over the last few years, there has been a considerable research effort to integrate beam steering systems on a PIC, and various beam steering demonstrators based on optical phased arrays have been realized. Arrays of up to thousands of coherent emitters, including their phase and amplitude control, have been integrated, and various applications have been explored. In this review paper, I will present an overview of the state of the art of this technology and its opportunities, illustrated by recent breakthroughs.

/pdf/highly-integrated-optical-phased-arrays-photonic-integrated-1sasazb2xw.pdf

Highly integrated optical phased arrays: photonic integrated circuits for optical beam shaping and beam steering

A spread spectrum waveform generator has a photonic oscillator and an optical heterodyne synthesizer. The photonic oscillator is a multi-tone optical comb generator for generating a series of RF comb lines on an optical carrier. The optical heterodyne synthesizer includes first and second phase-locked lasers, where the first laser feeds the multi-tone optical comb generator and the second laser is a single tone laser whose output light provides a frequency translation reference. At least one photodetector is provided for heterodyning the frequency translation reference with the optical output of the photonic oscillator to generate a spread spectrum waveform. A receiver pre-processor may be provided to operate on the spread spectrum waveform.

Method and apparatus for waveform generation

A chip-scale scanning lidar includes a two dimensional (2D) scanning micromirror for a transmit beam and a 2D scanning micromirror for a receive beam, a laser diode and a photodetector, a first waveguide and first grating outcoupler coupled to a front facet of the laser diode, a second waveguide and a second grating outcoupler coupled to a rear facet of the laser diode on a substrate. A first fixed micromirror, a second micromirror, a third micromirror, and a focusing component are in a dielectric layer bonded to the substrate over the laser diode and photodetector. The photodetector is optically coupled to the second fixed micromirror and the third fixed micromirror for coherent detection.

Single chip scanning lidar and method of producing the same

A waveform synthesizer comprising for synthesizing RF lightwave waveforms in the optical domain. These waveforms are constructed by generating their constituent Fourier frequency components or tones and then adjusting the amplitudes of those frequency components or tones. The apparatus includes: a RF-lightwave frequency-comb generator; and a multi-tone, frequency selective amplitude modulator coupled to the RF-lightwave frequency-comb generator for generating a continuous-wave comb comprising a set of RF tones amplitude modulated onto a lightwave carrier.

Agile RF-lightwave waveform synthesis and an optical multi-tone amplitude modulator

A method for transferring layers containing semiconductor devices and/or circuits to substrates other than those on which these semiconductor devices and/or circuits have been originally fabricated. The method comprises fabricating the semiconductor devices and/or circuits, coating them with a protective layer of photoresist followed by coating with a layer of wax. A special perforated structure is then also wax coated and the waxed surface of the structure is brought into a contact with the waxed surface of photoresist. The original seed substrate is removed and the exposed surface is then coated with adhesive followed by dissolving wax through the opening in the perforated structure and attaching the layer with semiconductor devices and/or circuits to another permanent substrate. As an alternative, a disk-shaped water-soluble structure can be used instead of the perforated structure.

Method for transferring semiconductor device layers to different substrates

A multi-tone photonic oscillator comprises a laser; an optical modulator coupled to the laser; and a delay line and a photodetector coupled to the optical modulator for generating a delayed electrical signal representation of the output of the optical modulator; wherein the optical modulator being responsible for the delayed electrical signal for generating multiple tones where the frequency intervals of the tones is a function of the amount of delay imposed by the delay line

Keyvan Sayyah

Papers

Method and apparatus for waveform generation

Single chip scanning lidar and method of producing the same

Agile RF-lightwave waveform synthesis and an optical multi-tone amplitude modulator

Method for transferring semiconductor device layers to different substrates

Injection-seeding of a multi-tone photonic oscillator