Transparent electronics is today one of the most advanced topics for a wide range of device applications. The key components are wide bandgap semiconductors, where oxides of different origins play an important role, not only as passive component but also as active component, similar to what is observed in conventional semiconductors like silicon. Transparent electronics has gained special attention during the last few years and is today established as one of the most promising technologies for leading the next generation of flat panel display due to its excellent electronic performance. In this paper the recent progress in n- and p-type oxide based thin-film transistors (TFT) is reviewed, with special emphasis on solution-processed and p-type, and the major milestones already achieved with this emerging and very promising technology are summarizeed. After a short introduction where the main advantages of these semiconductors are presented, as well as the industry expectations, the beautiful history of TFTs is revisited, including the main landmarks in the last 80 years, finishing by referring to some papers that have played an important role in shaping transparent electronics. Then, an overview is presented of state of the art n-type TFTs processed by physical vapour deposition methods, and finally one of the most exciting, promising, and low cost but powerful technologies is discussed: solution-processed oxide TFTs. Moreover, a more detailed focus analysis will be given concerning p-type oxide TFTs, mainly centred on two of the most promising semiconductor candidates: copper oxide and tin oxide. The most recent data related to the production of complementary metal oxide semiconductor (CMOS) devices based on n- and p-type oxide TFT is also be presented. The last topic of this review is devoted to some emerging applications, finalizing with the main conclusions. Related work that originated at CENIMAT|I3N during the last six years is included in more detail, which has led to the fabrication of high performance n- and p-type oxide transistors as well as the fabrication of CMOS devices with and on paper.

Oxide Semiconductor Thin‐Film Transistors: A Review of Recent Advances

An object is to provide a semiconductor device of which a manufacturing process is not complicated and by which cost can be suppressed, by forming a thin film transistor using an oxide semiconductor film typified by zinc oxide, and a manufacturing method thereof. For the semiconductor device, a gate electrode is formed over a substrate; a gate insulating film is formed covering the gate electrode; an oxide semiconductor film is formed over the gate insulating film; and a first conductive film and a second conductive film are formed over the oxide semiconductor film. The oxide semiconductor film has at least a crystallized region in a channel region.

Semiconductor device, and manufacturing method thereof

An object of the present invention is to decrease the resistance of a power supply line, to suppress a voltage drop in the power supply line, and to prevent defective display. A connection terminal portion includes a plurality of connection terminals. The plurality of connection terminals is provided with a plurality of connection pads which is part of the connection terminal. The plurality of connection pads includes a first connection pad and a second connection pad having a line width different from that of the first connection pad. Pitches between the plurality of connection pads are equal to each other.

Semiconductor device and display device

To provide a semiconductor device and a display device which can be manufactured through a simplified process and the manufacturing technique. Another object is to provide a technique by which a pattern of wirings or the like which is partially constitutes a semiconductor device or a display device can be formed with a desired shape with controllability.

Semiconductor device, electronic device, and method of manufacturing semiconductor device

A method of manufacturing a thin film transistor array panel is provided, the method includes: forming a gate line on an insulating substrate; forming a gate insulating layer; forming a semiconductor layer; forming a data conductive layer including a data line and a drain electrode; depositing a passivation layer; forming a photoresist including a first portion located on an end portion of the gate line, a second portion thicker than the first portion and located on the drain electrode, and a third portion thicker than the second portion; exposing a portion of the passivation layer under the second portion of the photoresist and a portion of the gate insulating layer under the first portion of the photoresist by etching using the photoresist as an etch mask; forming first and second contact holes exposing the drain electrode and the end portions of the gate line, respectively; and forming a pixel electrode connected to the drain electrode through the first contact hole.

Thin film transistor array panel and manufacturing method thereof

A TFT includes a zinc oxide (ZnO)-based channel layer having a plurality of semiconductor layers. An uppermost of the plurality of semiconductor layers has a Zn concentration less than that of a lower semiconductor layer to suppress an oxygen vacancy due to plasma. The uppermost semiconductor layer of the channel layer also has a tin (Sn) oxide, a chloride, a fluoride, or the like, which has a relatively stable bonding energy against plasma. The uppermost semiconductor layer is relatively strong against plasma shock and less decomposed when being exposed to plasma, thereby suppressing an increase in carrier concentration.

Thin film transistors and methods of manufacturing the same

Provided is a method of manufacturing a ZnO-based thin film transistor (TFT). The method may include forming source and drain electrodes using one or two wet etchings. A tin (Sn) oxide, a fluoride, or a chloride having relatively stable bonding energy against plasma may be included in a channel layer. Because the source and drain electrodes are formed by wet etching, damage to the channel layer and an oxygen vacancy may be prevented or reduced. Because the material having higher bonding energy is distributed in the channel layer, damage to the channel layer occurring when a passivation layer is formed may be prevented or reduced.

METHOD OF MANUFACTURING ZnO-BASED THIN FILM TRANSISTOR

A liquid crystal display (LCD) includes thin film transistors (TFTs) each having spaced apart source/drain electrodes and an oxide-type semiconductive film disposed over and between the source/drain electrodes to define an active layer. Each of the source/drain electrodes includes a portion of a subdivided transparent conductive layer where one subdivision of the transparent conductive layer continues from within its one of the source/drain electrodes to define an optically exposed pixel-electrode that is reliably connected integrally to the one source/drain electrode. Mass production costs can be reduced and production reliability increased because a fewer number of photolithographic masks can be used to form the TFTs.

Liquid crystal display and method of fabricating the same to have TFT's with pixel electrodes integrally extending from one of the source/drain electrodes

A thin film transistor array substrate, which can have high mobility of charge and can achieve uniform electrical characteristics for wide display devices, and a method of manufacturing the thin film transistor array substrate, are provided. The thin film transistor array substrate includes an oxide semiconductor layer having a channel and formed on an insulating substrate, a gate electrode overlapping the oxide semiconductor layer, a gate insulating film disposed between the oxide semiconductor layer and the gate electrode, and a passivation film formed on the oxide semiconductor layer and the gate electrode. At least one of the gate insulating film and the passivation film contains fluorine-containing silicon.

Thin film transistor array substrate having improved electrical characteristics and method of manufacturing the same

Oxide semiconductor thin film transistors (TFT) and methods of manufacturing the same are provided. The methods include forming a channel layer on a substrate, forming source and drain electrodes at opposing sides of the channel layer, and oxidizing a surface of the channel layer by placing an oxidizing material in contact with the surface of the channel layer, reducing carriers on the surface of the channel layer. Due to the oxidizing agent treatment of the surface of the channel layer, excessive carriers that are generated naturally, or during the manufacturing process, may be more effectively controlled.

Kyung-seok Son

Papers

Thin film transistors and methods of manufacturing the same

METHOD OF MANUFACTURING ZnO-BASED THIN FILM TRANSISTOR

Liquid crystal display and method of fabricating the same to have TFT's with pixel electrodes integrally extending from one of the source/drain electrodes

Thin film transistor array substrate having improved electrical characteristics and method of manufacturing the same

Oxide semiconductor thin film transistors and fabrication methods thereof