Modeling chemical and physical processes of wood and biomass pyrolysis

There has been an enormous amount of research in recent years in the area of thermo-chemical conversion of biomass into bio-fuels (bio-oil, bio-char and bio-gas) through pyrolysis technology due to its several socio-economic advantages as well as the fact it is an efficient conversion method compared to other thermo-chemical conversion technologies. However, this technology is not yet fully developed with respect to its commercial applications. In this study, more than two hundred publications are reviewed, discussed and summarized, with the emphasis being placed on the current status of pyrolysis technology and its potential for commercial applications for bio-fuel production. Aspects of pyrolysis technology such as pyrolysis principles, biomass sources and characteristics, types of pyrolysis, pyrolysis reactor design, pyrolysis products and their characteristics and economics of bio-fuel production are presented. It is found from this study that conversion of biomass to bio-fuel has to overcome challenges such as understanding the trade-off between the size of the pyrolysis plant and feedstock, improvement of the reliability of pyrolysis reactors and processes to become viable for commercial applications. Further study is required to achieve a better understanding of the economics of biomass pyrolysis for bio-fuel production, as well as resolving issues related to the capabilities of this technology in practical application.

https://cyberleninka.org/article/n/1011788.pdf

Biofuels production through biomass pyrolysis - a technological review.

Biomass is considered to have potential to be used as an alternative energy source. High carbon content present in biomass converts it into high energy biochar on thermochemical treatment. Among few well established thermochemical technologies for the treatment of biomass and biogenic waste to produce high energy char along with oil and gaseous yield, pyrolysis is the most studied and discussed technique in the recent past. A comparison between the existing techniques is established in the present work. Production of char from the biomass and biogenic wastes is reviewed and it was found that yield of the biochar depends upon the biomass composition like moisture content and presence of cellulose or lignin. Pyrolysis product distribution and their quality strongly depend upon the process parameters. Different biomasses which can be used as raw material in pyrolysis are also reviewed and categorized depending upon their source. Pyrolysis process parameters such as temperature, heating rate, residence time etc. also influence the biochar yield. This study discusses the effect of these process parameters on the production of biochar through pyrolysis of biomass.

Effect of process parameters on production of biochar from biomass waste through pyrolysis: A review

Biomass gasification is a widely used thermochemical process for obtaining products with more value and potential applications than the raw material itself. Cutting-edge, innovative and economical gasification techniques with high efficiencies are a prerequisite for the development of this technology. This paper delivers an assessment on the fundamentals such as feedstock types, the impact of different operating parameters, tar formation and cracking, and modelling approaches for biomass gasification. Furthermore, the authors comparatively discuss various conventional mechanisms for gasification as well as recent advances in biomass gasification. Unique gasifiers along with multi-generation strategies are discussed as a means to promote this technology into alternative applications, which require higher flexibility and greater efficiency. A strategy to improve the feasibility and sustainability of biomass gasification is via technological advancement and the minimization of socio-environmental effects. This paper sheds light on diverse areas of biomass gasification as a potentially sustainable and environmentally friendly technology.

/pdf/an-overview-of-advances-in-biomass-gasification-3qwzqn5oyi.pdf

An overview of advances in biomass gasification

Biomass is an important primary energy source as well as renewable energy source. As the most promising biomass utilization method, gasification/pyrolysis produces not only useful fuel gases, char and chemicals, but also some byproducts like fly ash, NOx, SO2 and tar. Tar in the product gases will condense at low temperature, and lead to clogged or blockage in fuel lines, filters and engines. Moreover, too much tar in product gases will reduce the utilization efficiency of biomass. Therefore, the reduction or decomposition of tar in biomass derived fuel gases is one of the biggest obstacles in its utilization for power generation. In this paper, we review the literatures pertaining to tar reduction or destruction methods during biomass gasification/pyrolysis. On the basis of their characteristics, the current tar reduction or destruction methods can be broadly divided into five main groups: mechanism methods, self-modification, thermal cracking, catalyst cracking and plasma methods.

L Fagbemi

Papers

Pyrolysis products from different biomasses: application to the thermal cracking of tar