Nanofluids are potential heat transfer fluids with enhanced thermophysical properties and heat transfer performance can be applied in many devices for better performances (i.e. energy, heat transfer and other performances). In this paper, a comprehensive literature on the applications and challenges of nanofluids have been compiled and reviewed. Latest up to date literatures on the applications and challenges in terms of PhD and Master thesis, journal articles, conference proceedings, reports and web materials have been reviewed and reported. Recent researches have indicated that substitution of conventional coolants by nanofluids appears promising. Specific application of nanofluids in engine cooling, solar water heating, cooling of electronics, cooling of transformer oil, improving diesel generator efficiency, cooling of heat exchanging devices, improving heat transfer efficiency of chillers, domestic refrigerator-freezers, cooling in machining, in nuclear reactor and defense and space have been reviewed and presented. Authors also critically analyzed some of the applications and identified research gaps for further research. Moreover, challenges and future directions of applications of nanofluids have been reviewed and presented in this paper. Based on results available in the literatures, it has been found nanofluids have a much higher and strongly temperature-dependent thermal conductivity at very low particle concentrations than conventional fluids. This can be considered as one of the key parameters for enhanced performances for many of the applications of nanofluids. Because of its superior thermal performances, latest up to date literatures on this property have been summarized and presented in this paper as well. However, few barriers and challenges that have been identified in this review must be addressed carefully before it can be fully implemented in the industrial applications.

/pdf/a-review-on-applications-and-challenges-of-nanofluids-ibdekzmmqr.pdf

A review on applications and challenges of nanofluids

This study provides a detailed literature review and an assessment of results of the research and development work forming the current status of nanofluid technology for heat transfer applications. Nanofluid technology is a relatively new field, and as such, the supporting studies are not extensive. Specifically, experimental results were reviewed in this study regarding the enhancement of the thermal conductivity and convective heat transfer of nanofluids relative to conventional heat transfer fluids, and assessments were made as to the state-of-the-art of verified parametric trends and magnitudes. Pertinent parameters of particle volume concentration, particle material, particle size, particle shape, base fluid material, temperature, additive, and acidity were considered individually, and experimental results from multiple research groups were used together when assessing results. To this end, published research results from many studies were recast using a common parameter to facilitate comparisons of data among research groups and to identify thermal property and heat transfer trends. The current state of knowledge is presented as well as areas where the data are presently inconclusive or conflicting. Heat transfer enhancement for available nanofluids is shown to be in the 15-40% range, with a few situations resulting in orders of magnitude enhancement.

Review and Comparison of Nanofluid Thermal Conductivity and Heat Transfer Enhancements

Measurement and model on thermal conductivities of carbon nanotube nanorefrigerants

An analytical overview of experimental results about the heat transfer capabilities of nanofluids is presented, using widely scattered available information from diverse literature sources. It is shown that, despite the large number of publications available about this issue, only few studies provide quantitative estimates on a complete set of experimental conditions so far and many studies are not coherent. Bearing in mind this problem, in this study a selection of the most valuable papers has been done, taking into account different points of view and hypotheses. Even if this work cannot be considered exhaustive of the complete literature in the field of nanofluids, it can be taken into account as a quick reference guide to have an overview of the different heat transfer phenomena in nanofluids and how the most important parameters (size, shape, concentration, materials etc.) influence the expected thermal performance of nanofluids.

Review of heat transfer in nanofluids: Conductive, convective and radiative experimental results

Thermal conductivity measurement and sedimentation detection of aluminum oxide nanofluids by using the 3ω method

Low thermal conductivity is a primary limitation in the development of energyefficient heat transfer fluids required in many industrial and commercial applications. To overcome this limitation, a new class of heat transfer fluids was developed by suspending nanoparticles and carbon nanotubes in these fluids. The resulting heat transfer nanofluids and nanolubricants possess significantly higher thermal conductivity compared to unfilled liquids. Three types of heat transfer nanofluids and nanolubricants, each containing controlled fractions of single-wall carbon nanotubes, multiwall carbon nanotubes, vapor grown carbon fibers, and amorphous carbon have been developed for multifunctional applications, based on their enhanced heat transfer and lubricity properties.

L. P. F. Chibante

Papers

Improving the heat transfer of nanofluids and nanolubricants with carbon nanotubes