5. In Situ Polymerization 3907 5.1. General Polymerization 3907 5.2. Photopolymerization 3910 5.3. Surface-Initiated Polymerization 3912 5.4. Other Methods 3913 6. Colloidal Nanocomposites 3913 6.1. Sol-Gel Process 3914 6.2. In Situ Polymerization 3916 6.2.1. Emulsion Polymerization 3917 6.2.2. Emulsifier-Free Emulsion Polymerization 3919 6.2.3. Miniemulsion Polymerization 3920 6.2.4. Dispersion Polymerization 3921 6.2.5. Other Polymerization Methods 3923 6.2.6. Conducting Nanocomposites 3924 6.3. Self Assembly 3926 7. Other Preparative Methods 3926 8. Characterization and Properties 3928 8.1. Chemical Structure 3928 8.2. Microstructure and Morphology 3929 8.3. Mechanical Properties 3933 8.3.1. Tensile, Impact, and Flexural Properties 3933 8.3.2. Hardness 3936 8.3.3. Fracture Toughness 3937 8.3.4. Friction and Wear Properties 3937 8.4. Thermal Properties 3938 8.5. Flame-Retardant Properties 3941 8.6. Optical Properties 3942 8.7. Gas Transport Properties 3943 8.8. Rheological Properties 3945 8.9. Electrical Properties 3945 8.10. Other Characterization Techniques 3946 9. Applications 3947 9.1. Coatings 3947 9.2. Proton Exchange Membranes 3948 9.3. Pervaporation Membranes 3948 9.4. Encapsulation of Organic Light-Emitting Devices 3948

Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications

Polymer-inorganic nanocomposite membranes for gas separation

Gas permeation properties of poly(amide-6-b-ethylene oxide)–silica hybrid membranes

With the growing concern about global warming placing greater demands on improving energy efficiency and reducing CO2 emissions, the need for improving the energy intensive, separation processes involving CO2 is well recognized. The US Department of Energy estimates that the separation of CO2 represents 75% of the cost associated with its separation, storage, transport, and sequestration operations. Hence, energy efficient, CO2 separation technologies with improved economics are needed for industrial processing and for future options to capture and concentrate CO2 for reuse or sequestration. The overall goal of this review is to foster the development of new adsorption and membrane technologies to improve manufacturing efficiency and reduce CO2 emissions. This study focuses on the power, petrochemical, and other CO2 emitting industries, and provides a detailed review of the current commercial CO2 separation technologies, i.e., absorption, adsorption, membrane, and cryogenic, an overview of the em...

State-of-the-art Adsorption and Membrane Separation Processes for Carbon Dioxide Production from Carbon Dioxide Emitting Industries

Development of dual layer of ZIF-8/PEBAX-2533 mixed matrix membrane for CO2 capture

Composite polyimide-silica materials have been synthesized via the sol-gel process and their gas transport properties studied. Structural characterizations have been performed showing that materials prepared with large concentration of silicon alkoxyde are composites made of silica particles embedded in the polyimide matrix while low-silicon alkoxyde concentration induces homogeneous materials. X-ray diffraction shows that the presence of silicon species induces modifications in the microstructure of the polyimide chains. These modifications have been confirmed by a shift of the glass transition temperature and density variations. Influence of the temperature and silicon species on the gas transport have been studied using various gases (nitrogen, oxygen, carbon dioxide, and methane) showing that gas permeation coefficients increase with the silicon species proportion. CO{sub 2} sorption measurements have been performed at various temperatures and the results have been analyzed in terms of the dual sorption theory. Activation energies have been calculated for the permeation and sorption mechanisms. The results show that silicon species contributes to the overall permeability.

L. Porcar

Papers

Polyimide-silica composite materials: How does silica influence their microstructure and gas permeation properties?