Based on fiber Bragg gratings (FBGs) and high nonlinear photonic crystal fiber (HN-PCF), a novel dual-wavelength erbium-doped fiber (EDF) laser is proposed and demonstrated. Experimental results show that, owing to the contributions of two degenerate four-wave mixings in the HN-PCF, the proposed fiber laser is quite stable and two output signals are uniform at room temperature. With adjustment of the attenuator, our fiber laser can selectively realize one wavelength lasing.

Stable and uniform dual-wavelength erbium-doped fiber laser based on fiber Bragg gratings and photonic crystal fiber.

We propose a new concept to produce switchable multiwavelength oscillations with a cascaded fiber Bragg grating overlapping cavity erbium-doped fiber laser. The laser can be designed to operate in multiwavelength or in wavelength switching modes. The different lines have different thresholds. For three-wavelength oscillation, the output powers are linear or piecewise linear functions of the input pump power. An output with a variation of only 1.5 dB has been achieved with an input pump power of 100 mW. For wavelength switching, three single-wavelength and two dual-wavelength operation regions have been obtained toy adjusting the input pump levels.

Switchable multiwavelength erbium-doped fiber laser with cascaded fiber grating cavities

Switchable multi-wavelength erbium-doped fiber lasers by using cascaded fiber Bragg gratings written in high birefringence fiber

Continuous-wave silica-based erbium-doped fibre lasers

The authors propose and demonstrate a simple switchable dual-wavelength Ytterbium-doped fiber laser based on a few-mode fiber grating. The laser can be designed to operate in stable dual-wavelength or wavelength-switching modes, due to the polarization hole burning enhanced by the few-mode fiber grating. The lasing lines may be controlled only by a polarization controller. Stable operation is achieved at room temperature when the wavelength separation is 0.9 nm.

Switchable dual-wavelength ytterbium-doped fiber laser based on a few-mode fiber grating

Two erbium-doped fiber ring lasers (EDFRLs) wvith simultaneous emission at four different wavelengths are demonstrated. Both systems employ fiber Bragg gratings (FBGs) to select the operation wavelengths within the ring. The sensing capability of the FBGs has been taken advantage of, allowing for the sources to be used as sensor multiplexing schemes. The first system employs four FBGs in a tree filter topology, achieving four output channels with -5 dBm power each. The second system comprises an in-line filtering topology with active fiber segments within the filter. This second source yields 2-dBm output signals and allows for a higher number of lines to be easily added to the system. A comparison between both topologies is carried out, and their capability for sensor multiplexing is demonstrated.

L. Talaverano

Papers

Multiwavelength fiber laser sources with Bragg-grating sensor multiplexing capability