[신간의 별자리x] 우리/미술, 그리고 ‘슬픔의 박물관’

On the mechanisms of biocompatibility.

Carbon capture and storage (CCS) is broadly recognised as having the potential to play a key role in meeting climate change targets, delivering low carbon heat and power, decarbonising industry and, more recently, its ability to facilitate the net removal of CO2 from the atmosphere. However, despite this broad consensus and its technical maturity, CCS has not yet been deployed on a scale commensurate with the ambitions articulated a decade ago. Thus, in this paper we review the current state-of-the-art of CO2 capture, transport, utilisation and storage from a multi-scale perspective, moving from the global to molecular scales. In light of the COP21 commitments to limit warming to less than 2 °C, we extend the remit of this study to include the key negative emissions technologies (NETs) of bioenergy with CCS (BECCS), and direct air capture (DAC). Cognisant of the non-technical barriers to deploying CCS, we reflect on recent experience from the UK's CCS commercialisation programme and consider the commercial and political barriers to the large-scale deployment of CCS. In all areas, we focus on identifying and clearly articulating the key research challenges that could usefully be addressed in the coming decade.

/pdf/carbon-capture-and-storage-ccs-the-way-forward-11rgsqyer0.pdf

Carbon capture and storage (CCS): the way forward

5. In Situ Polymerization 3907 5.1. General Polymerization 3907 5.2. Photopolymerization 3910 5.3. Surface-Initiated Polymerization 3912 5.4. Other Methods 3913 6. Colloidal Nanocomposites 3913 6.1. Sol-Gel Process 3914 6.2. In Situ Polymerization 3916 6.2.1. Emulsion Polymerization 3917 6.2.2. Emulsifier-Free Emulsion Polymerization 3919 6.2.3. Miniemulsion Polymerization 3920 6.2.4. Dispersion Polymerization 3921 6.2.5. Other Polymerization Methods 3923 6.2.6. Conducting Nanocomposites 3924 6.3. Self Assembly 3926 7. Other Preparative Methods 3926 8. Characterization and Properties 3928 8.1. Chemical Structure 3928 8.2. Microstructure and Morphology 3929 8.3. Mechanical Properties 3933 8.3.1. Tensile, Impact, and Flexural Properties 3933 8.3.2. Hardness 3936 8.3.3. Fracture Toughness 3937 8.3.4. Friction and Wear Properties 3937 8.4. Thermal Properties 3938 8.5. Flame-Retardant Properties 3941 8.6. Optical Properties 3942 8.7. Gas Transport Properties 3943 8.8. Rheological Properties 3945 8.9. Electrical Properties 3945 8.10. Other Characterization Techniques 3946 9. Applications 3947 9.1. Coatings 3947 9.2. Proton Exchange Membranes 3948 9.3. Pervaporation Membranes 3948 9.4. Encapsulation of Organic Light-Emitting Devices 3948

Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications

A concentrated fish soup could be gelled in the winter and re-solled upon heating. In contrast, some synthetic copolymers exhibit an inverse sol–gel transition with spontaneous physical gelation upon heating instead of cooling. If the transition in water takes place below the body temperature and the chemicals are biocompatible and biodegradable, such gelling behavior makes the associated physical gels injectable biomaterials with unique applications in drug delivery and tissue engineering etc. Various therapeutic agents or cells can be entrapped in situ and form a depot merely by a syringe injection of their aqueous solutions at target sites with minimal invasiveness and pain. This tutorial review summarizes and comments on this soft matter, especially thermogelling poly(ethylene glycol)–(biodegradable polyester) block copolymers. The main types of injectable hydrogels are also briefly introduced, including both physical gels and chemical gels.

Injectable hydrogels as unique biomedical materials

In vitro degradation of three-dimensional porous poly(d,l-lactide-co-glycolide) scaffolds for tissue engineering

In vitro degradation of seven three-dimensional porous scaffolds composed of PLGA85/15, a very useful poly(d,l-lactide-co-glycolide), was performed in phosphate- buffered saline solution at 37°C up to 26 weeks, and effects of porosity (80 -95%) and pore size (50 - 450 m) on the degradation of the scaffolds were investigated A series of quantities were measured during the degradation processes: molecular weight and its distribution of PLGA; compressive strength and modulus; and weight, dimension, and porosity of scaffolds In all of cases with different pore morphologies, the degradation processes obeyed a three-stage model Scaf- folds with a higher porosity or a smaller pore size degraded more slowly than and thus outlasted those with a lower porosity or a larger pore size The effects are both attributed to a wall effect and a surface area effect because the scaffolds with lower porosities or larger pores possess thicker pore walls and smaller surface area, which depress the diffusion of acidic degradation products and thus results in a stronger acid-catalyzed hydrolysis This work suggests that, in de- signing a tissue-engineering scaffold composed of PLGA and adjusting its degradation rate, the effects of pore mor- phologies should be taken into consideration in addition to those of chemical composition and condensed state of raw materials© 2005 Wiley Periodicals, Inc J Biomed Mater Res 75A: 767-777, 2005

Effects of porosity and pore size on in vitro degradation of three-dimensional porous poly(D,L-lactide-co-glycolide) scaffolds for tissue engineering

High Molecular Weight Poly(butylene succinate-co-butylene furandicarboxylate) Copolyesters: From Catalyzed Polycondensation Reaction to Thermomechanical Properties

A comparative study of porous scaffolds with cubic and spherical macropores

The purpose of this study has been to investigate the possible effects of the normal joint cavity environment on chondrocytic differentiation of bone-marrow-derived mesenchymal stem cells (MSCs). Autologous bone marrow was aspirated from the iliac crest of male sheep. MSCs were purified, expanded, and labeled with the fluorescent dye PKH26. Labeled MSCs were then grown on a three-dimensional porous scaffold of poly (L-lactic-co-glycolic acid) in vitro and implanted into the joint cavity by a surgical procedure. At 4 or 8 weeks after implantation, the implants were removed for histochemical and immunohistochemical analysis. The cells labeled with red fluorescent PKH26 in the implants expressed type II collagen and synthesized sulfated proteoglycans. However, the osteoblast-specific marker, osteocalcin, was not detected by immunohistochemistry indicating that the implanted MSCs had not differentiated into osteoblasts by being directly exposed to the normal joint cavity. To investigate the possible factors involved in chondrocytic differentiation of MSCs further, we co-cultured sheep MSCs with the main components of the normal joint cavity, viz., synovial fluid or synovial cells, in vitro. After 1 or 2 weeks of co-culture, the MSCs in both co-culture systems expressed markers of chondrogenesis. These results suggest that synovial fluid and synovium from normal joint cavity are important for the chondrocytic differentiation of adult bone-marrow-derived MSCs.

Linbo Wu

Papers

In vitro degradation of three-dimensional porous poly(d,l-lactide-co-glycolide) scaffolds for tissue engineering

Effects of porosity and pore size on in vitro degradation of three-dimensional porous poly(D,L-lactide-co-glycolide) scaffolds for tissue engineering

High Molecular Weight Poly(butylene succinate-co-butylene furandicarboxylate) Copolyesters: From Catalyzed Polycondensation Reaction to Thermomechanical Properties

A comparative study of porous scaffolds with cubic and spherical macropores

In vivo chondrogenesis of adult bone-marrow-derived autologous mesenchymal stem cells