Fiber optic interferometers to sense various physical parameters including temperature, strain, pressure, and refractive index have been widely investigated. They can be categorized into four types: Fabry-Perot, Mach-Zehnder, Michelson, and Sagnac. In this paper, each type of interferometric sensor is reviewed in terms of operating principles, fabrication methods, and application fields. Some specific examples of recently reported interferometeric sensor technologies are presented in detail to show their large potential in practical applications. Some of the simple to fabricate but exceedingly effective Fabry-Perot interferometers, implemented in both extrinsic and intrinsic structures, are discussed. Also, a wide variety of Mach-Zehnder and Michelson interferometric sensors based on photonic crystal fibers are introduced along with their remarkable sensing performances. Finally, the simultaneous multi-parameter sensing capability of a pair of long period fiber grating (LPG) is presented in two types of structures; one is the Mach-Zehnder interferometer formed in a double cladding fiber and the other is the highly sensitive Sagnac interferometer cascaded with an LPG pair.

/pdf/interferometric-fiber-optic-sensors-2akpm29ydq.pdf

Interferometric Fiber Optic Sensors

We propose and demonstrate a thinned fiber based Mach-Zehnder interferometer for multi-purpose sensing applications. The sensor head is formed by all-fiber in-line singlemode-multimode-thinned-singlemode (SMTS) fiber structure, only using the splicing method. The principle of operation relies on the effect that the thinned fiber cladding modes interference with the core mode by employing a multimode fiber as a mode coupler. Experimental results showed that the liquid refractive index information can be simultaneously provided from measuring the sensitivity of the liquid level. A 9.00 mm long thinned fiber sensor at a wavelength of 1538.7228 nm exhibits a water level sensitivity of -175.8 pm/mm, and refractive index sensitivity as high as -1868.42 (pm/mm)/RIU, respectively. The measuring method is novel, for the first time to our knowledge. In addition, it also demonstrates that by monitoring the wavelength shift, the sensor at a wavelength of 1566.4785 nm exhibits a refractive index sensitivity of -25.2935 nm/RIU, temperature sensitivity of 0.0615 nm/°C, and axial strain sensitivity of -2.99 pm/μe, respectively. Moreover, the sensor fabrication process is very simple and cost effective.

All-fiber Mach-Zehnder interferometers for sensing applications

Graphene as a novel material has laid a foundation for its applications in optical fiber sensors, due to its unique properties, especially the optical properties. On the other hand, optical fiber sensors have received world-wide attention due to their high sensitivity, small size, good anti-electromagnetism disturbance ability and other potential advantages. In this paper, the developments of graphene in the applications of optical fiber sensors were reviewed from four aspects. Firstly, the common preparation methods of graphene were introduced. Next, the optical properties of graphene have been concluded. And then, some typical optical fiber chemical and biological sensors based on graphene, such as temperature sensors, biological sensors and gas sensors, were reviewed. It was shown that graphene had a great potential in the optical fiber sensing technology. Furthermore, the deficiencies and challenges of the graphene in the applications of optical fiber sensors were analyzed. In a whole, the unique advantages of graphene have present their versatility and importance in the application fields of optical fiber sensors.

Review on the graphene based optical fiber chemical and biological sensors

A review of the salinity measurement technology based on the optical fiber sensor is presented. The principles of optical fiber measurement, the structures of probes and the characteristics of various sensing structures are concerned. Firstly, this paper discusses the relationship between the salinity and refractive index, and the effect of ion pairs on the refractive index. Secondly, four methods of direct or non-direct measurements of salinity are summarized, including optical refraction method, optical fiber grating, optical interference and surface plasmon effect. Subsequently, the article compares performances of various sensing structures and analyses the advantages and disadvantages of different sensors. Finally, a prospect of salinity measurement requirement and the development direction of fiber-optic sensors in this area are addressed.

Review of salinity measurement technology based on optical fiber sensor

We report a compact fiber in-line Mach-Zehnder interferometer for refractive index sensing with high sensitivity and precise sensing location. One arm of the interferometer contains a microcavity formed by removing part of the fiber core near the core and cladding interface by femtosecond laser micromachining, and the other arm remains in line with the remaining part of the fiber core. Such a fiber in-line Mach-Zehnder interferometer exhibits an extremely high refractive-index-sensitivity of −9370 nm/RIU (refractive index unit) within the refractive index range between 1.31 and 1.335.

/pdf/fiber-in-line-mach-zehnder-interferometer-fabricated-by-18mjfnls7e.pdf

Fiber in-line Mach-Zehnder interferometer fabricated by femtosecond laser micromachining for refractive index measurement with high sensitivity

In this article, thermo-reversible compounds have been applied as a transducer in a fiber-optic temperature sensor and the dependence of the reflected optical power on the temperature has been investigated. The reflected optical power indicated a monotonous change in the temperature range of observation, corresponding to an 1.4 dB increase in the optical power when the temperature increased from 20 to 125°C. The temperature dependence of the optical properties was found to be reversible, which indicates that the temperature transducer is reversible as well.

Liqiu Men

Papers

A fiber-optic temperature sensor with a thermo-reversible compound as a transducer