Photoelectrochemical (PEC) cells offer the ability to convert electromagnetic energy from our largest renewable source, the Sun, to stored chemical energy through the splitting of water into molecular oxygen and hydrogen. Hematite (α-Fe(2)O(3)) has emerged as a promising photo-electrode material due to its significant light absorption, chemical stability in aqueous environments, and ample abundance. However, its performance as a water-oxidizing photoanode has been crucially limited by poor optoelectronic properties that lead to both low light harvesting efficiencies and a large requisite overpotential for photoassisted water oxidation. Recently, the application of nanostructuring techniques and advanced interfacial engineering has afforded landmark improvements in the performance of hematite photoanodes. In this review, new insights into the basic material properties, the attractive aspects, and the challenges in using hematite for photoelectrochemical (PEC) water splitting are first examined. Next, recent progress enhancing the photocurrent by precise morphology control and reducing the overpotential with surface treatments are critically detailed and compared. The latest efforts using advanced characterization techniques, particularly electrochemical impedance spectroscopy, are finally presented. These methods help to define the obstacles that remain to be surmounted in order to fully exploit the potential of this promising material for solar energy conversion.

Solar Water Splitting: Progress Using Hematite (α‐Fe2O3) Photoelectrodes

Photoreduction of CO2 into sustainable and green solar fuels is generally believed to be an appealing solution to simultaneously overcome both environmental problems and energy crisis. The low selectivity of challenging multi-electron CO2 photoreduction reactions makes it one of the holy grails in heterogeneous photocatalysis. This Review highlights the important roles of cocatalysts in selective photocatalytic CO2 reduction into solar fuels using semiconductor catalysts. A special emphasis in this review is placed on the key role, design considerations and modification strategies of cocatalysts for CO2 photoreduction. Various cocatalysts, such as the biomimetic, metal-based, metal-free, and multifunctional ones, and their selectivity for CO2 photoreduction are summarized and discussed, along with the recent advances in this area. This Review provides useful information for the design of highly selective cocatalysts for photo(electro)reduction and electroreduction of CO2 and complements the existing reviews on various semiconductor photocatalysts.

Cocatalysts for Selective Photoreduction of CO2 into Solar Fuels.

Visible-light-induced photodegradation of rhodamine B over nanosized Bi2WO6 has been observed. Bi2WO6 exhibited a high photoactivity to photodegrade rhodamine B in the central pH solution under visible irradiation (λ > 420 nm). After five recycles for the photodegradation of rhodamine B, the catalyst did not exhibit any significant loss of activity, confirming the photocatalyst is essentially stable. The total organic carbon measurement displayed that a high degree of mineralization was achieved in the present photochemical system. The results of density functional theory calculation illuminated that the visible-light absorption band in the Bi2WO6 catalyst is attributed to the band transition from the hybrid orbitals of Bi6s and O2p to the W5d orbitals. The Bi2WO6-assisted photocatalytic degradation of rhodamine occurs via two competitive processes:  a photocatalytic process and a photosensitized process. The transformation of rhodamine is mainly via the photocatalytic process. Kinetic studies by using el...

Visible-light-induced degradation of rhodamine B by nanosized Bi2WO6.

A general one-pot solvothermal process was explored to prepare BiOX (X = Cl, Br, I) powders by employing ethylene glycol as the solvent. The as-prepared BiOX powders were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, UV−vis diffuse reflectance spectroscopy, and nitrogen sorption. The resulting BiOX samples were phase-pure and of hierarchical microspheres consisting of nanoplates. The band gaps of the as-prepared powders were estimated to about 3.22, 2.64, and 1.77 eV for BiOCl, BiOBr, and BiOI, respectively. On the basis of characterization results, we proposed a possible process for the growth of hierarchical BiOX nanoplate microspheres. Moreover, we evaluated their photocatalytic activities on the degradation of methyl orange and compared them with TiO2 (Degussa, P25) under UV−vis light irradiation and C-doped TiO2 under visible light (λ > 420 nm) irradiation, respectively. It was found that al...

Generalized One-Pot Synthesis, Characterization, and Photocatalytic Activity of Hierarchical BiOX (X = Cl, Br, I) Nanoplate Microspheres

Harnessing solar energy for the production of clean hydrogen fuels by a photoelectrochemical (PEC) cell represents a very attractive but challenging alternative This review focuses on recent developments of some promising photoelectrode materials, such as BiVO4, a-Fe2O3, TaON, and Ta3N5 for solar hydrogen production Some strategies have been developed to improve PEC performances of the photoelectrode materials, including: (i) doping for enhancing visible light absorption in the wide bandgap semiconductor or promoting charge transport in the narrow bandgap semiconductor, respectively; (ii) surface treatment for removing segregation phase or surface states; (iii) electrocatalysts for decreasing the overpotentials; (iv) morphology control for enhancing the light absorption and shortening transfer distance of minority carriers; (v) other methods, such as sensitization, passivating layer, and band structure engineering using heterojunction structures, and so on Photochemical durability of the photoelectrodes is also discussed, since any potential PEC technology must balance efficiency against cost and photochemical durability Photochemical durability may be amended by optimizing the photoelectrode, electrocatalyst, and electrolyte at the same time In addition, solar seawater splitting is briefly introduced because it has received attention recently Finally, trends in research in PEC cells for solar hydrogen production are detailed

Photoelectrochemical cells for solar hydrogen production: current state of promising photoelectrodes, methods to improve their properties, and outlook

The behavior of semiconducting electrodes for photoelectrolysis of water is examined in terms of the physical properties of the semiconductor. The semiconductor‐electrolyte junction is treated as a simple Schottky barrier, and the photocurrent is described using this model. The approach is appropriate since large‐band‐gap semiconductors have an intrinsic oxygen overpotential which removes the electrode reaction kinetics as the rate‐limiting step. The model is successful in describing the wavelength and potential dependence of the photocurrent in WO3 and allows a determination of the band gap, optical absorption depth, minority‐carrier diffusion length, flat‐band potential, and the nature of the fundamental optical transition (direct or indirect). It is shown for WO3 that minority‐carrier diffusion plays a limited role in determining the photoresponse of the semiconductor‐electrolyte junction. There are indications that the diffusion length in this low carrier mobility material is determined by diffusion‐controlled bulk recombination processes rather than the more common trap‐limited recombination. It is also shown that the fundamental optical transition is indirect and that the band‐gap energy depends relatively strongly on applied potential and electrolyte. This effect seems to be the result of field‐induced crystallographic distortions in antiferroelectric WO3.

M. A. Butler

Papers

Photoelectrolysis and physical properties of the semiconducting electrode WO2