Local pulse wave velocity (PWV) is evolving as one of the important determinants of arterial hemodynamics, localized vessel stiffening associated with several pathologies, and a host of other cardiovascular events. Although PWV was introduced over a century ago, only in recent decades, due to various technological advancements, has emphasis been directed toward its measurement from a single arterial section or from piecewise segments of a target arterial section. This emerging worldwide trend in the exploration of instrumental solutions for local PWV measurement has produced several invasive and noninvasive methods. As of yet, however, a univocal opinion on the ideal measurement method has not emerged. Neither have there been extensive comparative studies on the accuracy of the available methods. Recognizing this reality, makes apparent the need to establish guideline-recommended standards for the measurement methods and reference values, without which clinical application cannot be pursued. This paper enumerates all major local PWV measurement methods while pinpointing their salient methodological considerations and emphasizing the necessity of global standardization. Further, a summary of the advancements in measuring modalities and clinical applications is provided. Additionally, a detailed discussion on the minimally explored concept of incremental local PWV is presented along with suggestions of future research questions.

Local Pulse Wave Velocity: Theory, Methods, Advancements, and Clinical Applications

Cardiovascular diseases account for the highest mortality globally, but recent advances in wearable technologies may potentially change how these illnesses are diagnosed and managed. In particular, continuous monitoring of cardiovascular vital signs for early intervention is highly desired. To this end, flexible wearable sensors that can be comfortably worn over long durations are gaining significant attention. In this review, advanced flexible wearable sensors for monitoring cardiovascular vital signals are outlined and discussed. Specifically, the functional materials, configurations, mechanisms, and recent advances of these flexible sensors for heart rate, blood pressure, blood oxygen saturation, and blood glucose monitoring are highlighted. Different mechanisms in bioelectric, mechano-electric, optoelectric, and ultrasonic wearable sensors are presented to monitor cardiovascular vital signs from different body locations. Present challenges, possible strategies, and future directions of these wearable sensors are also discussed. With rapid development, these flexible wearable sensors will potentially be applicable for both medical diagnosis and daily healthcare use in tackling cardiovascular diseases.

Flexible Wearable Sensors for Cardiovascular Health Monitoring.

Ambulatory blood pressure (BP) provides valuable information for cardiovascular risk assessment. The present cuff-based devices are intrusive for long-term BP monitoring, whereas cuff-less BP measurement methods based on pulse transit time or multi-parameter are inferior in robustness and reliability by using electrocardiogram (ECG) and photoplethysmogram signals. This study examined a multi-sensor fusion-based platform and algorithm for systolic BP (SBP), mean arterial pressure (MAP), and diastolic BP (DBP) estimation. The proposed multi-sensor platform was comprised of one ECG sensor and two pulse pressure wave sensors for simultaneous signal collection. After extracting 35 features from the collected signals, a weakly supervised feature selection method was proposed for dimension reduction because the reference oscillometric technique-based BP are intermittent and can be redeemed as coarse-grained labels. BP models were then established using a multi-instance regression algorithm. A total of 85 participants including 17 hypertensive and 12 hypotensive patients were enrolled. Experimental results showed that the proposed approach exhibited good accuracy for diverse population with an estimation error of 1.62 ± 7.76 mmHg for SBP, 1.53 ± 6.03 mmHg for MAP, and 1.49 ± 5.52 for DBP, which complied with the association for the advancement of medical instrumentation standards in BP estimation. Moreover, the estimation accuracy is with random daily fluctuations rather than long-term degradation through a maximum two-month follow-up period indicated good robustness performance. These results suggest that the proposed approach is with high reliability and robustness and thus provides a novel insight for cuff-less BP measurement.

/pdf/multi-sensor-fusion-approach-for-cuff-less-blood-pressure-2y137cae6p.pdf

Multi-Sensor Fusion Approach for Cuff-Less Blood Pressure Measurement

Pulse transit time (PTT) represents a potential approach for cuff-less blood pressure (BP) monitoring. Conventionally, PTT is determined by (1) measuring (a) ECG and ear, finger, or toe PPG waveforms or (b) two of these PPG waveforms and (2) detecting the time delay between the waveforms. The conventional PTTs (cPTTs) were compared in terms of correlation with BP in humans. Thirty-two volunteers [50% female; 52 (17) (mean (SD)) years; 25% hypertensive] were studied. The four waveforms and manual cuff BP were recorded before and after slow breathing, mental arithmetic, cold pressor, and sublingual nitroglycerin. Six cPTTs were detected as the time delays between the ECG R-wave and ear PPG foot, R-wave and finger PPG foot [finger pulse arrival time (PAT)], R-wave and toe PPG foot (toe PAT), ear and finger PPG feet, ear and toe PPG feet, and finger and toe PPG feet. These time delays were also detected via PPG peaks. The best correlation by a substantial extent was between toe PAT via the PPG foot and systolic BP [- 0.63 ± 0.05 (mean ± SE); p < 0.001 via one-way ANOVA]. Toe PAT is superior to other cPTTs including the popular finger PAT as a marker of changes in BP and systolic BP in particular.

/pdf/conventional-pulse-transit-times-as-markers-of-blood-1ep2v5fbdz.pdf

Conventional pulse transit times as markers of blood pressure changes in humans

Continuous measurement of blood pressure is crucial to the assessment of many medical conditions. However, the current clinical gold standard involving an arterial catheter, occluding cuff, and other invasive procedures are performed in hospital settings while home-based devices can provide only intermittent measurement and are not as reliable. Therefore, there is a significant need for continuous non-invasive blood pressure (cNIBP) monitoring in the daily life. Pulse transit time (PTT)/pulse arrival time (PAT) - based blood pressure measurement has proven its potential to address this need. In this article, we present state-of-the-art devices and recent literature related to measurement technologies used in PTT/PAT - based methods for cNIBP monitoring. Various physiological signals which could be used to enable cNIBP in the home setting are categorized into two groups (i.e., proximal waveforms and distal waveforms) and are thoroughly discussed and compared. Given insightful analysis of these waveforms, we highlight their combinations to derive PTT/PAT values for BP measurement then discuss challenges presented from the cuffless and PTT/PAT - based nature of these devices. Finally, we conclude with future directions needed for home-based cNIBP adaptation and present societal broader impacts.

/pdf/continuous-non-invasive-blood-pressure-monitoring-a-feub37j5ju.pdf

Continuous Non-Invasive Blood Pressure Monitoring: A Methodological Review on Measurement Techniques

Objective: We propose a calibration-free method and system for cuffless blood pressure (BP) measurement from superficial arteries. A prototype device with bi-modal probe arrangement was designed and developed to estimate carotid BP – an indicator of central aortic pressure. Methods: Mathematical models relating BP parameters of an arterial segment to its dimensions and local pulse wave velocity (PWV) are introduced. A bi-modal probe utilizing ultrasound and photoplethysmograph sensors was developed and used to measure diameter values and local PWV from the carotid artery. Carotid BP was estimated using the measured physiological parameters without any subject- or population-specific calibration procedures. The proposed cuffless BP estimation method and system were tested for accuracy, usability, and for potential utility in hypertension screening, on a total of 83 subjects. Results: The prototype device demonstrated its capability of detecting beat-by-beat arterial dimensions and local PWV simultaneously. Carotid diastolic BP (DBP) and systolic BP (SBP) were estimated over multiple cardiac cycles in real-time. The absolute error in carotid DBP was Conclusion: The feasibility of calibration-free, cuffless BP measurement at an arterial site of interest was demonstrated with a level of acceptable accuracy. The study also demonstrated the potential utility of the proposed method and system in hypertension screening and local evaluation of arterial stiffness indices. Significance: Novel approach for calibration-free cuffless BP estimation; a potential tool for local BP measurement and hypertension screening.

M Chenniappan

Papers

Bi-Modal Arterial Compliance Probe for Calibration-Free Cuffless Blood Pressure Estimation

Hypertension and Diabetes: "Predict, Prevent and Protect".