Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

Phd by thesis

Progress, since the ITER Physics Basis publication (ITER Physics Basis Editors et al 1999 Nucl. Fusion 39 2137–2664), in understanding the processes that will determine the properties of the plasma edge and its interaction with material elements in ITER is described. Experimental areas where significant progress has taken place are energy transport in the scrape-off layer (SOL) in particular of the anomalous transport scaling, particle transport in the SOL that plays a major role in the interaction of diverted plasmas with the main-chamber material elements, edge localized mode (ELM) energy deposition on material elements and the transport mechanism for the ELM energy from the main plasma to the plasma facing components, the physics of plasma detachment and neutral dynamics including the edge density profile structure and the control of plasma particle content and He removal, the erosion of low- and high-Z materials in fusion devices, their transport to the core plasma and their migration at the plasma edge including the formation of mixed materials, the processes determining the size and location of the retention of tritium in fusion devices and methods to remove it and the processes determining the efficiency of the various fuelling methods as well as their development towards the ITER requirements. This experimental progress has been accompanied by the development of modelling tools for the physical processes at the edge plasma and plasma–materials interaction and the further validation of these models by comparing their predictions with the new experimental results. Progress in the modelling development and validation has been mostly concentrated in the following areas: refinement in the predictions for ITER with plasma edge modelling codes by inclusion of detailed geometrical features of the divertor and the introduction of physical effects, which can play a major role in determining the divertor parameters at the divertor for ITER conditions such as hydrogen radiation transport and neutral–neutral collisions, modelling of the ion orbits at the plasma edge, which can play a role in determining power deposition at the divertor target, models for plasma–materials and plasma dynamics interaction during ELMs and disruptions, models for the transport of impurities at the plasma edge to describe the core contamination by impurities and the migration of eroded materials at the edge plasma and its associated tritium retention and models for the turbulent processes that determine the anomalous transport of energy and particles across the SOL. The implications for the expected performance of the reference regimes in ITER, the operation of the ITER device and the lifetime of the plasma facing materials are discussed.

/pdf/chapter-4-power-and-particle-control-3l68lj0fxw.pdf

Chapter 4: Power and particle control

A blob-filament (or simply “blob”) is a magnetic-field-aligned plasma structure which is considerably denser than the surrounding background plasma and highly localized in the directions perpendicular to the equilibrium magnetic field B. In experiments and simulations, these intermittent filaments are often formed near the boundary between open and closed field lines, and seem to arise in theory from the saturation process for the dominant edge instabilities and turbulence. Blobs become charge-polarized under the action of an external force which causes unequal drifts on ions and electrons; the resulting polarization-induced E × B drift moves the blobs radially outwards across the scrape-off-layer (SOL). Since confined plasmas generally are subject to radial or outwards expansion forces (e.g., curvature and ∇B forces in toroidal plasmas), blob transport is a general phenomenon occurring in nearly all plasmas. This paper reviews the relationship between the experimental and theoretical results on blob form...

/pdf/convective-transport-by-intermittent-blob-filaments-4wpj3hvowo.pdf

Convective transport by intermittent blob-filaments: Comparison of theory and experiment

This paper reviews measurements of edge plasma turbulence in toroidal magnetic fusion devices with an emphasis on recent results in tokamaks. The dominant feature of edge turbulence is a high level of broadband density fluctuations with a relative amplitude δn/n ~ 5–100%, accompanied by large potential and electron temperature fluctuations. The frequency range of this turbulence is ~10 kHz–1 MHz, and the size scale is typically ~0.1–10 cm perpendicular to the magnetic field but many metres along the magnetic field, i.e. the structure is nearly that of 2D 'filaments'. Large intermittent bursts or 'blobs' are usually observed in the scrape-off layer. Diagnostic and data analysis techniques are reviewed and the main experimental results are summarized. Recent comparisons of experimental results with edge turbulence theory are discussed, and some directions for future experiments are suggested.

http://iopscience.iop.org/article/10.1088/0741-3335/49/7/S01/pdf

Edge turbulence measurements in toroidal fusion devices

A heuristic model for the plasma scrape-off width in low-gas-puff tokamak H-mode plasmas is introduced. Grad B and curv B drifts into the scrape-off layer (SOL) are balanced against near-sonic parallel flows out of the SOL, to the divertor plates. The overall particle flow pattern posited is a modification for open field lines of Pfirsch‐ Schl¨ uter flows to include order-unity sinks to the divertors. These assumptions result in an estimated SOL width of ∼2aρp/R. They also result in a first-principles calculation of the particle confinement time of H-mode plasmas, qualitatively consistent with experimental observations. It is next assumed that anomalous perpendicular electron thermal diffusivity is the dominant source of heat flux across the separatrix, investing the SOL width, derived above, with heat from the main plasma. The separatrix temperature is calculated based on a two-point model balancing power input to the SOL with Spitzer‐H¨ arm parallel thermal conduction losses to the divertor. This results in a heuristic closed-form prediction for the power scrape-off width that is in reasonable quantitative agreement both in absolute magnitude and in scaling with recent experimental data. Further work should include full numerical calculations, including all magnetic and electric drifts, as well as more thorough comparison with experimental data. (Some figures may appear in colour only in the online journal)

https://iopscience.iop.org/article/10.1088/0029-5515/52/1/013009/pdf

Heuristic drift-based model of the power scrape-off width in low-gas-puff H-mode tokamaks

Intermittent plasma objects (IPOs) featuring higher pressure than the surrounding plasma, and responsible for ∼50% of the E×BT radial transport, are observed in the scrape off layer (SOL) and edge of the DIII-D tokamak [J. Watkins et al., Rev. Sci. Instrum. 63, 4728 (1992)]. Conditional averaging reveals that the IPOs, produced at a rate of ∼3×103 s−1, are positively charged and also polarized, featuring poloidal electric fields of up to 4000 V/m. The IPOs move poloidally at speeds of up to 5000 m/s and radially with E×BT/B2 velocities of ∼2600 m/s near the last closed flux surface (LCFS), and ∼330 m/s near the wall. The IPOs slow down as they shrink in radial size from 4 cm at the LCFS to 0.5 cm near the wall. The IPOs appear in the SOL of both L and H mode discharges and are responsible for nearly 50% of the SOL radial E×B transport at all radii; however, they are highly reduced in absolute amplitude in H-mode conditions.

/pdf/transport-by-intermittent-convection-in-the-boundary-of-the-jlmzni2mac.pdf

M. Tillack

Papers

Transport by intermittent convection in the boundary of the DIII-D tokamak