Two-photon excitation provides a means of activating chemical or physical processes with high spatial resolution in three dimensions and has made possible the development of three-dimensional fluorescence imaging, optical data storage, and lithographic microfabrication. These applications take advantage of the fact that the two-photon absorption probability depends quadratically on intensity, so under tight-focusing conditions, the absorption is confined at the focus to a volume of order λ3 (where λ is the laser wavelength). Any subsequent process, such as fluorescence or a photoinduced chemical reaction, is also localized in this small volume. Although three-dimensional data storage and microfabrication have been illustrated using two-photon-initiated polymerization of resins incorporating conventional ultraviolet-absorbing initiators, such photopolymer systems exhibit low photosensitivity as the initiators have small two-photon absorption cross-sections (δ). Consequently, this approach requires high laser power, and its widespread use remains impractical. Here we report on a class of π;-conjugated compounds that exhibit large δ (as high as 1, 250 × 10−50 cm4 s per photon) and enhanced two-photon sensitivity relative to ultraviolet initiators. Two-photon excitable resins based on these new initiators have been developed and used to demonstrate a scheme for three-dimensional data storage which permits fluorescent and refractive read-out, and the fabrication of three-dimensional micro-optical and micromechanical structures, including photonic-bandgap-type structures.

Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication

Composition and Microstructure of Alkali Activated Fly Ash Binder: Effect of the Activator

We present a critical review that encompasses the fundamentals and state-of-the-art knowledge of barium titanate-based piezoelectrics. First, the essential crystallography, thermodynamic relations, and concepts necessary to understand piezoelectricity and ferroelectricity in barium titanate are discussed. Strategies to optimize piezoelectric properties through microstructure control and chemical modification are also introduced. Thereafter, we systematically review the synthesis, microstructure, and phase diagrams of barium titanate-based piezoelectrics and provide a detailed compilation of their functional and mechanical properties. The most salient materials treated include the (Ba,Ca)(Zr,Ti)O3, (Ba,Ca)(Sn,Ti)O3, and (Ba,Ca)(Hf,Ti)O3 solid solution systems. The technological relevance of barium titanate-based piezoelectrics is also discussed and some potential market indicators are outlined. Finally, perspectives on productive lines of future research and promising areas for the applications of these ma...

BaTiO3-based piezoelectrics: Fundamentals, current status, and perspectives

It is of great importance to develop multifunctional bioactive scaffolds, which combine angiogenesis capacity, osteostimulation, and antibacterial properties for regenerating lost bone tissues. In order to achieve this aim, we prepared copper (Cu)-containing mesoporous bioactive glass (Cu-MBG) scaffolds with interconnective large pores (several hundred micrometer) and well-ordered mesopore channels (around 5 nm). Both Cu-MBG scaffolds and their ionic extracts could stimulate hypoxia-inducible factor (HIF)-1a and vascular endothelial growth factor(VEGF) expression in human bone marrow stromal cells(hBMSCs). In addition, both Cu-MBG scaffolds and their ionic extracts significantly promoted the osteogenic differentiation of hBMSCs by improving their bone-related gene expression (alkaline phosphatase (ALP), osteopontin(OPN) and osteocalcin (OCN)). Furthermore, Cu-MBG scaffolds could maintain a sustained release of ibuprofen and significantly inhibited the viability of bacteria. This study indicates that the incorporation of Cu2þ ions into MBG scaffolds significantly enhances hypoxia-like tissue reaction leading to the coupling of angiogenesis and osteogenesis. Cu2þ ions play an important role to offer the multifunctional properties of MBG scaffold system. This study has demonstrated that it is possible to develop multifunctional scaffolds by combining enhanced angiogenesis potential, osteostimulation, and antibacterial properties for the treatment of large bone defects.

Copper-containing mesoporous bioactive glass scaffolds with multifunctional properties of angiogenesis capacity, osteostimulation and antibacterial activity

The maximum power output and minimum charging time of a lithium-ion battery depend on both ionic and electronic transport. Ionic diffusion within the electrochemically active particles generally represents a fundamental limitation to the rate at which a battery can be charged and discharged. To compensate for the relatively slow solid-state ionic diffusion and to enable high power and rapid charging, the active particles are frequently reduced to nanometre dimensions, to the detriment of volumetric packing density, cost, stability and sustainability. As an alternative to nanoscaling, here we show that two complex niobium tungsten oxides-Nb16W5O55 and Nb18W16O93, which adopt crystallographic shear and bronze-like structures, respectively-can intercalate large quantities of lithium at high rates, even when the sizes of the niobium tungsten oxide particles are of the order of micrometres. Measurements of lithium-ion diffusion coefficients in both structures reveal room-temperature values that are several orders of magnitude higher than those in typical electrode materials such as Li4Ti5O12 and LiMn2O4. Multielectron redox, buffered volume expansion, topologically frustrated niobium/tungsten polyhedral arrangements and rapid solid-state lithium transport lead to extremely high volumetric capacities and rate performance. Unconventional materials and mechanisms that enable lithiation of micrometre-sized particles in minutes have implications for high-power applications, fast-charging devices, all-solid-state energy storage systems, electrode design and material discovery.

/pdf/niobium-tungsten-oxides-for-high-rate-lithium-ion-energy-4n7wb31bzb.pdf

Niobium tungsten oxides for high-rate lithium-ion energy storage

Infrared spectroscopy of different phosphates structures

Identification of silicooxygen rings in SiO2 based on IR spectra.

Spectroscopic studies of different aluminosilicate structures

Phosphate glasses are very promising materials from the application and fundamental point of view. Properties of the glasses are strongly related to the structure which may be modified by various glass constituents. In the paper density functional theory calculations of simple phosphate structural units, chains build of them and iron-phosphate clusters are presented. Influence of a position of the unit in the chain is described. Structural changes of the units due to formation of bonds between non-bridging oxygens and iron atoms in different coordinations are shown. The optimized clusters are used then to calculate theoretical Raman and Fourier transform infrared spectra. The calculated spectra are then compared to the experimental results for an iron-phosphate glass from the pyrophosphate stoichiometry region. Finally the structural features of the glass are described.

Structure of phosphate and iron-phosphate glasses by DFT calculations and FTIR/Raman spectroscopy

The aim of the work is to determine the internal structure of simple silicate glasses based on structural studies. Due to the absence of the long-range order, the X-ray methods usually applied in the studies of crystalline materials are of low applicability in the investigations of glasses. Therefore, spectroscopic methods, such as Middle Infrared (MIR), which make it possible to ‘see’ the short- and the middle-range orders are extremely suitable in their studies. MIR investigations have shown that the glasses studied exhibit domain composition, which corresponds to the order of certain crystalline phases. Analysis of the MIR spectra of simple silicate glasses and their mathematical decomposition allowed us to identify the bands characteristic for ring systems as well as those originating from Si–O − , Si = O defects. Appearance of the bands characteristic for pseudolattice ring vibrations (740–600 cm − 1 ) in the MIR spectra of glasses is an evidence of the existence of over-tetrahedral order.

Maciej Sitarz

Papers

Infrared spectroscopy of different phosphates structures

Identification of silicooxygen rings in SiO2 based on IR spectra.

Spectroscopic studies of different aluminosilicate structures

Structure of phosphate and iron-phosphate glasses by DFT calculations and FTIR/Raman spectroscopy

The structure of simple silicate glasses in the light of Middle Infrared spectroscopy studies