Production of biochar (the carbon (C)-rich solid formed by pyrolysis of biomass) and its storage in soils have been suggested as a means of abating climate change by sequestering carbon, while simultaneously providing energy and increasing crop yields. Substantial uncertainties exist, however, regarding the impact, capacity and sustainability of biochar at the global level. In this paper we estimate the maximum sustainable technical potential of biochar to mitigate climate change. Annual net emissions of carbon dioxide (CO 2 ), methane and nitrous oxide could be reduced by a maximum of 1.8 Pg CO 2 -C equivalent (CO 2 -C e ) per year (12 % of current anthropogenic CO 2 -C e emissions; 1 Pg = 1 Gt), and total net emissions over the course of a century by 130 Pg CO 2 -C e , without endangering food security, habitat or soil conservation. Biochar has a larger climate-change mitigation potential than combustion of the same sustainably procured biomass for bioenergy, except when fertile soils are amended while coal is the fuel being offset.

/pdf/sustainable-biochar-to-mitigate-global-climate-change-54jjaa8usw.pdf

Sustainable biochar to mitigate global climate change

In this review, we summarize the knowledge of the production and properties of charcoal that has been accumulated over the past 38 millenia. The manipulation of pressure, moisture content, and gas flow enables biomass carbonization with fixed-carbon yields that approachor attainthe theoretical limit after reaction times of a few tens of minutes. Much of the heat needed to carbonize the feed is released by vigorous, exothermic secondary reactions that reduce the formation of unwanted tars by augmenting the charcoal yield in a well-designed carbonizer. As a renewable fuel, charcoal has many attractive features:  it contains virtually no sulfur or mercury and is low in nitrogen and ash; it is highly reactive yet easy to store and handle. Carbonized charcoal can be a good adsorbent with a large surface area and a semimetal with an electrical resistivity comparable to that of graphite. Recent advances in knowledge about the production and properties of charcoal presage its expanded use as a renewable fuel, red...

/pdf/the-art-science-and-technology-of-charcoal-production-2yxzbuvb7k.pdf

The Art, Science, and Technology of Charcoal Production†

Biomass pyrolysis kinetics: A comparative critical review with relevant agricultural residue case studies

Biomass is considered to have potential to be used as an alternative energy source. High carbon content present in biomass converts it into high energy biochar on thermochemical treatment. Among few well established thermochemical technologies for the treatment of biomass and biogenic waste to produce high energy char along with oil and gaseous yield, pyrolysis is the most studied and discussed technique in the recent past. A comparison between the existing techniques is established in the present work. Production of char from the biomass and biogenic wastes is reviewed and it was found that yield of the biochar depends upon the biomass composition like moisture content and presence of cellulose or lignin. Pyrolysis product distribution and their quality strongly depend upon the process parameters. Different biomasses which can be used as raw material in pyrolysis are also reviewed and categorized depending upon their source. Pyrolysis process parameters such as temperature, heating rate, residence time etc. also influence the biochar yield. This study discusses the effect of these process parameters on the production of biochar through pyrolysis of biomass.

Effect of process parameters on production of biochar from biomass waste through pyrolysis: A review

The replacement of fossil resources that currently provide more than 90% of our energy needs and feedstocks of the chemical industry in combination with reduced emission of carbon dioxide is one of the most pressing challenges of mankind. Biomass as a globally available resource has been proposed as an alternative feedstock for production of basic building blocks, which could partially or even fully replace the currently utilized fossil-based ones in well-established chemical processes. The destruction of lignocellulosic feed followed by oxygen removal from its cellulose and hemicellulose content by catalytic processes results in the formation of initial platform chemicals (IPCs). However, their sustainable production strongly depends on the availability of resources, their efficient or even industrially viable conversion processes, and replenishment time of feedstocks. Herein, we overview recent advances and developments in catalytic transformations of the carbohydrate content of lignocellulosic biomass ...

Catalytic Conversion of Carbohydrates to Initial Platform Chemicals: Chemistry and Sustainability

Previous work has shown that very high yields of charcoal are obtained when pyrolysis of the biomass feedstock is conducted at elevated pressure in a closed vessel, wherein the pyrolytic vapors are held captive and in contact with the solid products of pyrolysis In this paper, we show that, for some biomass species, the yield of carbon produced by this process effectively attains the theoretical value predicted to exist when thermochemical equilibrium is realized Various agricultural wastes (eg, kukui nut, macadamia nut, and pecan shells) and tropical species (eg, eucalyptus, leucaena, and bamboo) offer higher yields of carbon than the hardwoods traditionally employed by industry in the US and Europe Moreover, the yields of carbon from oat and rice hulls and from sunflower seed hulls are nearly as high as the yields of carbon from hardwoods There is a correlation between the yield of carbon and the acid-insoluble lignin content of the feed Charcoal briquettes made from agricultural wastes and lump charcoal from tropical species are promising sources of renewable carbon for use in the smelting of metal ores

Attainment of the Theoretical Yield of Carbon from Biomass

A novel, three-step process for the production of high-quality activated carbons from macadamia nut shell and coconut shell charcoals is described. In this process the charcoal is (1) heated to a high temperature (carbonized), (2) oxidized in air following a stepwise heating program from low (ca. 450 K) to high (ca. 660 K) temperatures (oxygenated), and (3) heated again in an inert environment to a high temperature (activated). By use of this procedure, activated carbons with surface areas greater than 1,000 m{sub 2}/g are manufactured with an overall yield of 15% (based on the dry shell feed). Removal of carbon mass by the development of mesopores and macropores is largely responsible for increases in the surface area of the carbons above 600 m{sub 2}/g. Thus, the surface area per gram of activated carbon can be represented by an inverse function of the yield for burnoffs between 15 and 60%. These findings are supported by mass-transfer calculations and pore-size distribution measurements. A kinetic model for gasification of carbon by oxygen, which provides for an Eley-Rideal type reaction of a surface oxide with oxygen in air, fits the measured gasification rates reasonably well over the temperature range of 550--660 K.

Preparation of activated carbons from macadamia nut shell and coconut shell by air activation

A high-yield activated carbon is produced from macadamia nut shell charcoal by (i) carbonization of the charcoal at 1173 K, (ii) air oxidation of the carbonized charcoal in boiling water (AOBW) at 503−553 K, and (iii) activation (a second carbonization) of the oxygenated carbon. In step ii, air is bubbled through a sparger to maintain a relatively high concentration of dissolved oxygen in the water, and the boiling water serves to control the temperature of the carbon during its gasification by the dissolved oxygen. Carbon dioxide is observed to be the only gaseous product of the oxidation chemistry. The oxidation results and the properties of the activated carbons from AOBW are similar to those obtained by controlled atmospheric air oxidation. However, the rate of CO2 formation is observed to increase with time to a plateau for AOBW, whereas the gasification rate decreases with time for atmospheric air oxidation. Multiple cycles, involving AOBW followed by activation, efficiently increase the specific su...

Man S. Tam

Papers

Attainment of the Theoretical Yield of Carbon from Biomass

Preparation of activated carbons from macadamia nut shell and coconut shell by air activation

Activated Carbon from Macadamia Nut Shell by Air Oxidation in Boiling Water