Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel

The influence of minimum quantity of lubrication (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel

Effects and mechanisms in minimal quantity lubrication machining of an aluminum alloy

Traditionally, metal working fluids (MWF) are known to improve machining performance despite poor ecological and health side effects. A new sustainable process that has minimized the use and application of MWFs is NDM (near dry machining). Although there is much controversy on the effectiveness of NDM, it is agreed that a lack of science-based modeling prevents its widespread use. This paper presents a new method to predict tool-wear/tool-life performance in NDM by extending a Taylor speed-based dry machining equation. Experimental work and validation of the model was performed in an automotive production environment in the machining of steel wheel rims. Machining experiments and validation of the new equation reveal that tool-wear can be predicted within 10% when the effect of NDM is statistically different than dry machining. Tool-wear measurements obtained during the validation of the model showed that NDM can improve tool-wear/tool-life over four times compared to dry machining which underlines the need to develop sustainable models to match current practices.

A comprehensive tool-wear/tool-life performance model in the evaluation of NDM (near dry machining) for sustainable manufacturing

In all machining processes, tool wear is a natural phenomenon and it leads to tool failure. The growing demands for high productivity of machining need use of high cutting velocity and feed rate. Such machining inherently produces high cutting temperature, which not only reduces tool life but also impairs the product quality. Metal cutting fluid changes the performance of machining operations because of their lubrication, cooling and chip flushing functions, but the use of cutting fluid has become more problematic in terms of both employee health and environmental pollution. The minimization of cutting fluid also leads to economical benefits by way of saving lubricant costs and workpiece/tool/machine cleaning cycle time. The concept of minimum quantity lubrication (MQL) has been suggested since a decade ago as a means of addressing the issues of environmental intrusiveness and occupational hazards associated with the airborne cutting fluid particles on factory shop floors. This paper deals with experimental investigation on the role of MQL by vegetable oil on cutting temperature, tool wear, surface roughness and dimensional deviation in turning AISI-1060 steel at industrial speed-feed combinations by uncoated carbide insert. The encouraging results include significant reduction in tool wear rate, dimensional inaccuracy and surface roughness by MQL mainly through reduction in the cutting zone temperature and favorable change in the chip-tool and work-tool interaction.

Performance evaluation of minimum quantity lubrication by vegetable oil in terms of cutting force, cutting zone temperature, tool wear, job dimension and surface finish in turning AISI-1060 steel

In spite of the manifold efforts to reach a total renouncement of the use of cooling lubn'cants in metal cuttingfor en­ vironmentally reasons, cooling lubrication is an essential condition to achieve an economical tool life and the re­ quired surface quality in many cases. Against this background, the minimum quantity cooling lubrication is an interesting possibility for an economical and environmentally compatible production which combines the functional­ ity of the cooling lubrication with an extremely low consumption of cooling lubricants. With help of various results achieved in turning, milling and broaching experiments, this report describes the possibilities of application of mini­ mum quantity cooling lubricating systems in machining with geometrically defined cutting edges.

/pdf/application-of-minimum-quantity-cooling-lubrication-3u9zfknkbm.pdf

Application of minimum quantity cooling lubrication technology in cutting processes

Considering increasing waste disposal problems in the area of cooling and lubricating liquids as well as their potential of health hazard and environmental endangering the question is to ask to what extend the customary way of cooling and lubrication in metalworking is still in keeping with the times Several approaches to solve this problem seem to be suitable to guarantee a better human and environmental agreeableness as well as a smaller consumption To make a reliable statement about the possibilities for the application of reducing strategies and their limits, fundamental knowledge about the process-changing characteristics of cooling and lubricating liquids in general is required Concerning this, it is important to know more about the mechanism which enables the moistening of the tool's cutting edge with cooling lubricants in spite of, especially in case of turning, high pressure, high temperatures and opposite kinetics in the cutting area

Investigation of cooling and lubricating liquids

Seit Beginn dieses Jahrhunderts werden fertigungstechnische Prozesse systematisch wissenschaftlich untersucht und weiterentwickelt. Lag der Forschungsschwerpunkt bislang darin, durch einen hohen Grad innovativer Neuerungen ein Maximum an Leistung bei hoher Wirtschaftlichkeit zu erzielen, so rucken in letzter Zeit zunehmend okologische Gesichtspunkte in den Vordergrund. Diese umweltrelevanten Aspekte waren in der Vergangenheit, wenn uberhaupt, nur am Rande beachtet worden. Der gesellschaftliche Wandel und die damit verbundene zunehmende Sensibilisierung in Umwelt- und Gesundheitsfragen spiegelt sich wider in einer steigenden Anzahl gesetzlicher Regelungen sowie einer wachsenden Zahl nationaler und internationaler Normen. Und auch die Industrie kommt heutzutage nicht mehr umhin, Entwicklungen im Bereich der Fertigungstechnik in engem Zusammenhang mit ihrer Umweltvertraglichkeit zu bewerten.

Probleme der umwelt- und humanverträglichen Fertigung am Beispiel der Kühlschmierstoffe. Teil 2

Mit dem Thema "Aufbau und Wirkungsweise von Kuhlschmierstoffen" befaste sich der neugegrundete Arbeitskreis "Kuhlschmierstoffe und -emulsionen ", der erstmals am 7 November 1991 im Institut fur Werkzeugmaschinen der Universitat Stuttgart zusammentrat Der nachfolgende Bericht stellt die Ziele des Arbeitskreises vor und gibt einen kurzen Uberblick der Vortrage

Arbeitskreis Kühlschmierstoffe und -emulsionen gegründet

http://elib.uni-stuttgart.de/opus/volltexte/2009/4861/pdf/hei110.pdf

Marcel Lutz

Papers

Application of minimum quantity cooling lubrication technology in cutting processes

Investigation of cooling and lubricating liquids

Probleme der umwelt- und humanverträglichen Fertigung am Beispiel der Kühlschmierstoffe. Teil 2

Arbeitskreis Kühlschmierstoffe und -emulsionen gegründet

Probleme der umwelt- und humanverträglichen Fertigung am Beispiel der Kühlschmierstoffe. Teil 1