Pull-on garments provided with breathability in the side panels (64), the back waistband panel (60), and preferably the leg flap panels (58). The moisture vapor transmission rate of the side panels in conjunction with the overall vapor transmission rate of the rest of the absorbent article assists to reduce the incidence of heat rash and other skin problems associated with high heat and humidity conditions. Further, the use of waistbands and leg bands having lower forces to reduce pressure on the skin while relying more upon the forces of the side panels to maintain the product on the wearer further reduce these problems.

Disposable pull-on pant

Unique copolymers comprising propylene, ethylene and/or one or more unsaturated comonomers are characterized as having: at least one, preferably more than one, of the following properties: (i) 13C NMR peaks corresponding to a regio-error at about 14.6 and about 15.7 ppm, the peaks of about equal intensity, (ii) a B-value greater than about 1.4 when the comonomer content of the copolymer is at least about 3 wt%, (iii) a skewness index, S?ix?, greater than about -1.20, (iv) a DSC curve with a Tme that remains essentially the same and a Tmax that decreases as the amount of comonomer in the copolymer is increased, and (v) an X-ray diffraction pattern that reports more gamma-form crystals than a comparable copolymer prepared with a Ziegler-Natta catalyst. These polypropylene polymers are made using a nonmetallocene, metal-centered, heteroaryl ligand catalyst. These polymers can be blended with other polymers, and are useful in the manufacture of films, sheets, foams, fibers and molded articles.

Isotactic propylene copolymers, their preparation and use

Embodiments of the present invention relate to article comprising 1) a functionalized component, 2) tackifier, and 3) an olefin polymer comprising one or more C3 to C40 olefins, optionally one or more diolefins, and less than 5 mole % of ethylene having a Dot T-Peel of 1 Newton or more, a branching index (g′) of 0.95 or less measured at the Mz of the polymer; and an Mw of 100,000 or less; where the functional component is selected from the group consisting of functionalized polymers, functionalized oligomers and beta nucleating agents; and where the Gardner color of the adhesive does not change by more than 7 Gardner units when the adhesive has been heat aged at 180° C. for 48 hours as compared to the Gardner color of the unaged composition.

Polyolefin adhesive compositions and articles made therefrom

The present invention is directed to a pattern-unbonded nonwoven fabric having continuous bonded areas defining a plurality of discrete unbonded areas, which is suitable for use as an improved loop fastening material for hook and loop fastening systems. The fibers or filaments within the discrete unbonded areas of the present invention are dimensionally stabilized by the continuous bonded areas that encircle or surround each unbonded area. The spaces between fibers or filaments within the unbonded areas remain sufficiently open or large to receive and engage hook elements of a complementary hook material. The hook material can be any of a wide variety of commercially available hook components which, as is known in the art, typically include a base material from which a plurality of hook elements project. The present invention further is directed to a process for making such a pattern-unbonded nonwoven fabric including the steps of providing a nonwoven fabric or web, providing opposedly positioned first and second calender rolls and defining a nip therebetween, with at least one of said rolls being heated and having a bonding pattern on its outermost surface comprising a continuous pattern of land areas defining a plurality of discrete openings, apertures or holes, and passing the nonwoven fabric or web within the nip formed by said rolls.

Pattern-unbonded nonwoven web and process for making the same

There is disclosed a nonwoven web for use as a barrier layer in an SMS fabric laminate. The web is formed at commercially acceptable polymer melt throughputs (greater than 3 PIH) by using a reactor granule polyolefin, preferably polypropylene, that has been modified by the addition of peroxide in amounts ranging from up to 3000 ppm to reduce the molecular weight distribution from an initial molecular weight distribution of from 4.0 to 4.5 Mw/Mn to a range of from 2.2 to 3.5 Mw/Mn. Also the addition of peroxide increases the melt flow rate (lowers viscosity) to a range between 800 up to 5000 gms/10 min at 230° C. The resulting web has an average fiber size of from 1 to 3 microns and pore sizes distributed predominantly in the range from 7 to 12 microns, with a lesser amount of pores from 12 to 25 microns, with virtually no pores greater than 25 microns, and with the peak of the pore size distribution less than 10 microns.

Nonwoven web with improved barrier properties

An ethylene polymer extrusion composition having high draw down and substantially reduced neck-in, a process for making such a composition and a process of using such a composition to prepare extrusion coatings, extrusion profiles and extrusion cast films are disclosed. The ethylene polymer extrusion composition is made of 75-95 weight percent of at least one ethylene α-olefin interpolymer and 5-25 weight percent of at least one high pressure ethylene polymer characterized as having high melt strength and a broad, bimodal molecular weight distribution. In profiles, coatings or films, the composition can be used as sealant, adhesive or abuse resistance layers.

Extrusion compositions having high drawdown and substantially reduced neck-in

Elastic materials, particularly films, strips, coatings, ribbons and sheets made from at least one substantially linear ethylene polymer are disclosed which can be fabricated on conventional polyolefin extrusion equipment. They can be used to produce elastic composite structures that are stretchable and have recycle compatibility between elastic and non-elastic components. The novel materials have at least about 80 percent recovery at 100 percent strain and are especially useful in making fabricated composite articles (e.g., disposable diapers).

Elastic materials and articles therefrom

A homogeneous, random interpolymer of ethylene and an alpha-olefinically unsaturated carboxylic acid or ester having melt indices from 0.1 to 300 grams/10 minutes, as determined by ASTM D-1238 (190 °C/2160 grams), is improved during its manufacture when made in a substantially constant environment in a stirred autoclave under substantially steady-state conditions of temperature, pressure, and flow rates, said temperature and pressure being sufficient to produce a single phase reaction, using a free-radical initiator, said improvement being obtained by the use of a minor amount of a telogenic modifier in the reaction mixture, the process being further characterized by the use of either, or both, of (a) a temperature which is lower than that which would be required without the presence of the telogen, or (b) a pressure which is higher than that which would be required without the presence of the modifier.

Process for producing homogeneous modified copolymers of ethylene/alpha-olefin carboxylic acids or esters

Blown films of LLDPE having reduced block and increased slip are provided by incorporating into the polymer, before blowing into films, effective amounts of certain fatty acid amides and inorganic materials which provide fast bloom, thereby obtaining an expedient effect of the additives on the surface properties of the blown film.

Process for reducing block and increasing slip of linear low density polyethylene copolymer extrusion-blown films

Blends of linear low density polyethylene (LLDPE) with ethylene/acrylic acid copolymer (E/AA) are prepared which exhibit improved optical, impact, heat-seal, and anti-blocking properties as compared to the E/AA copolymer alone.

Mckinney Osborne K

Papers

Extrusion compositions having high drawdown and substantially reduced neck-in

Elastic materials and articles therefrom

Process for producing homogeneous modified copolymers of ethylene/alpha-olefin carboxylic acids or esters

Process for reducing block and increasing slip of linear low density polyethylene copolymer extrusion-blown films

Blends of ethylene/acrylic acid copolymers with linear low density polyethylene