This study was carried out to investigate the enhanced removal of arsenite (As(III)) by potassium ferrate (K2FeO4) coupled with three Al-based coagulants, which focused innovatively on the distribution and transformation of hydrolyzed aluminum species as well as the mechanism of K2FeO4 interacted with different aluminum hydrolyzed polymers during As(III) removal. Results demonstrated that As(III) removal efficiency could be substantially elevated by K2FeO4 coupled with three Al-based coagulants treatment and the optimum As(III) removal effect was occurred at pH 6 with more than 97%. K2FeO4 showed a great effect on the distribution and transformation of aluminum hydrolyzed polymers and then coupled with a variety of aluminum species produced by the hydrolysis of aluminum coagulants for arsenic removal. During enhanced coagulation, arsenic removal by AlCl3 was main through the charge neutralization of in situ Al13 and the sweep flocculation of Al(OH)3, while PACl1 mainly depended on the charge neutralization of preformed Al13 and the bridging adsorption of Al13 aggregates, whereas PACl2 mainly relied on the sweep flocculation of Al(OH)3. This study provided a new insight into the distribution and transformation of aluminum species for the mechanism of As(III) removal by K2FeO4 coupled with different Al-based coagulants.

Characteristics and mechanisms of As(III) removal by potassium ferrate coupled with Al-based coagulants: Analysis of aluminum speciation distribution and transformation.

Characteristics and mechanisms of As(III) removal by potassium ferrate coupled with Al-based coagulants: Analysis of aluminum speciation distribution and transformation

Diverse performances for Pb(II) adsorption by in situ formed Fe(III) oxyhydroxide derived from ferrate(VI) reduction and ferrous oxidation

It is well known the capacity of potassium ferrate (Fe(VI)) for the oxidation of pollutants or co-precipitation and adsorption of hazardous species. However, little information has been paid on the adsorption and co-precipitation contribution of the Fe(VI) resultant nanoparticles, the in situ hydrolytic ferric iron oxides. Here, the removal of arsenate (As(V)) and arsenite (As(III)) by Fe(VI) was investigated, which focused on the interaction mechanisms of Fe(VI) with arsenic, especially in the contribution of the co-precipitation and adsorption of its hydrolytic ferric iron oxides. pH and Fe(VI) played significant roles on arsenic removal; over 97.8% and 98.1% of As(V) and As(III) removal were observed when Fe(VI):As(V) and Fe(VI):As(III) were 24:1 and 16:1 at pH 4, respectively. The removal of As(V) and As(III) by in situ and ex situ formed hydrolytic ferric iron oxides was examined respectively. The results revealed that As(III) was oxidized by Fe(VI) to As(V), and then was removed though co-precipitation and adsorption by the hydrolytic ferric iron oxides with the contribution content was about 1:3. For As(V), it could be removed directly by the in situ formed particles from Fe(VI) through co-precipitation and adsorption with the contribution content was about 1:1.5. By comparison, As(III) and As(V) were mainly removed through adsorption by the 30-min hydrolytic ferric iron oxides during the ex situ process. The hydrolytic ferric iron oxides size was obviously different in the process of in situ and ex situ, possessing abundant and multiple morphological structures ferric oxides, which was conducive for the efficient removal of arsenic. This study would provide a new perspective for understanding the potential of Fe(VI) treatment on arsenic control. 

/pdf/highly-efficient-removal-of-arsenate-and-arsenite-with-2xbwe4v5.pdf

Meng Guo

Papers

Highly efficient removal of arsenate and arsenite with potassium ferrate: role of in situ formed ferric nanoparticle