This investigation aims to explore determinants of exposure to particle size-specific welding fume. Area sampling of ultrafine particles (UFP) was performed at 33 worksites in parallel with the collection of respirable particles. Personal sampling of respirable and inhalable particles was carried out in the breathing zone of 241 welders. Median mass concentrations were 2.48 mg m(-3) for inhalable and 1.29 mg m(-3) for respirable particles when excluding 26 users of powered air-purifying respirators (PAPRs). Mass concentrations were highest when flux-cored arc welding (FCAW) with gas was applied (median of inhalable particles: 11.6 mg m(-3)). Measurements of particles were frequently below the limit of detection (LOD), especially inside PAPRs or during tungsten inert gas welding (TIG). However, TIG generated a high number of small particles, including UFP. We imputed measurements <LOD from the regression equation with manganese to estimate determinants of the exposure to welding fume. Concentrations were mainly predicted by the welding process and were significantly higher when local exhaust ventilation (LEV) was inefficient or when welding was performed in confined spaces. Substitution of high-emission techniques like FCAW, efficient LEV, and using PAPRs where applicable can reduce exposure to welding fume. However, harmonizing the different exposure metrics for UFP (as particle counts) and for the respirable or inhalable fraction of the welding fume (expressed as their mass) remains challenging.

/pdf/exposure-to-inhalable-respirable-and-ultrafine-particles-in-2y586os4kn.pdf

Exposure to Inhalable, Respirable, and Ultrafine Particles in Welding Fume

Recent studies report that exposure to manganese (Mn), an essential component of welding electrodes and some steels, results in neurotoxicity and/or Parkinson's disease (PD) in welders. This “state-of-the-science” review presents a critical analysis of the published studies that were conducted on a variety of Mn-exposed occupational cohorts during the last 100 yr, as well as the regulatory history of Mn and welding fumes. Welders often perform a variety of different tasks with varying degrees of duration and ventilation, and hence, to accurately assess Mn exposures that occurred in occupational settings, some specific information on the historical work patterns of welders is desirable. This review includes a discussion of the types of exposures that occur during the welding process—for which limited information relating airborne Mn levels with specific welding activities exists—and the human health studies evaluating neurological effects in welders and other Mn-exposed cohorts, including miners, millers, ...

State-of-the-Science Review: Does Manganese Exposure During Welding Pose a Neurological Risk?

Background In a group of 43 confined space welders dose–effect relationships had been identified for adverse neurological/neuropsychological functional effects in relation to manganese (Mn) in blood or air (cumulative exposure index). The welders’ exposure to Mn was unprotected and with poor ventilation, lasting on average 16.5 months. A follow-up examination 3.5 years later, after cessation of confined space welding, was carried out to re-assess the status of mood, movement/neuromotor and cognitive functions, and olfaction. Methods In 2008, 26 welders (70% response rate) were retested using a similar methodology as at baseline ( Bowler et al., 2007 ). A general linear model was used to estimate individual-specific endpoint differences over time. Mean age was 47 years, mean years of education 12.4, and mean total years of welding 16.9 years. Thirteen participants no longer welded. Results At follow-up, mean blood Mn concentration had decreased from 10.0 to 8.4 μg/L ( p  = 0.002). Those still welding had higher blood Mn than those no longer welding (9.9 μg/L vs. 6.8 μg/L, p  = 0.002). Several domains of cognitive functioning improved substantially as shown by large effect sizes. Emotional disturbance improved only slightly clinically, but complaints of depression and anxiety persisted. Motor dexterity/tactile function and graphomotor tremor improved significantly, while psychomotor speed remained unchanged. The findings of the neurological examination (UPDRS) did not change compared to baseline, whereas rigidity, dominant postural hand tremor and body sway worsened. Olfactory test scores remained depressed. Conclusion After 3.5 years of cessation of confined space welding, only cognitive function improved significantly, while olfactory, extrapyramidal, and mood disturbances remained constant or were exacerbated. This suggests differential intrinsic vulnerabilities of the brain loci involved with Mn exposure. As the Mn exposure of the Bay Bridge welders frequently exceeded the Cal-OSHA TLV of 0.2 mg Mn/m 3 at baseline, a more stringent preventive measure is recommended for confined space welding.

Prospective study on neurotoxic effects in manganese-exposed bridge construction welders

Welding generates complex metal aerosols, inhalation of which is linked to adverse health effects among welders. An important health concern of welding fume (WF) exposure is neurological dysfunction akin to Parkinson's disease (PD), thought to be mediated by manganese (Mn) in the fumes. Also, there is a proposition that welding might accelerate the onset of PD. Our recent findings link the presence of Mn in the WF with dopaminergic neurotoxicity seen in rats exposed to manual metal arc-hard surfacing (MMA-HS) or gas metal arc-mild steel (GMA-MS) fumes. To elucidate the molecular mechanisms further, we investigated the association of PD-linked (Park) genes and mitochondrial function in causing dopaminergic abnormality. Repeated instillations of the two fumes at doses that mimic ∼1 to 5 yr of worker exposure resulted in selective brain accumulation of Mn. This accumulation caused impairment of mitochondrial function and loss of tyrosine hydroxylase (TH) protein, indicative of dopaminergic injury. A fascinating finding was the altered expression of Parkin (Park2), Uchl1 (Park5), and Dj1 (Park7) proteins in dopaminergic brain areas. A similar regimen of manganese chloride (MnCl(2)) also caused extensive loss of striatal TH, mitochondrial electron transport components, and Park proteins. As mutations in PARK genes have been linked to early-onset PD in humans, and because welding is implicated as a risk factor for parkinsonism, PARK genes might play a critical role in WF-mediated dopaminergic dysfunction. Whether these molecular alterations culminate in neurobehavioral and neuropathological deficits reminiscent of PD remains to be ascertained.

https://faseb.onlinelibrary.wiley.com/doi/pdf/10.1096/fj.10.163964

Mitochondrial dysfunction and loss of Parkinson's disease-linked proteins contribute to neurotoxicity of manganese-containing welding fumes

We investigated airborne and internal exposure to manganese (Mn) and iron (Fe) among welders. Personal sampling of welding fumes was carried out in 241 welders during a shift. Metals were determined by inductively coupled plasma mass spectrometry. Mn in blood (MnB) was analyzed by graphite furnace atom absorption spectrometry. Determinants of exposure levels were estimated with multiple regression models. Respirable Mn was measured with a median of 62 (inter-quartile range (IQR) 8.4–320) μg/m3 and correlated with Fe (r=0.92, 95% CI 0.90–0.94). Inhalable Mn was measured with similar concentrations (IQR 10–340 μg/m3). About 70% of the variance of Mn and Fe could be explained, mainly by the welding process. Ventilation decreased exposure to Fe and Mn significantly. Median concentrations of MnB and serum ferritin (SF) were 10.30 μg/l (IQR 8.33–13.15 μg/l) and 131 μg/l (IQR 76–240 μg/l), respectively. Few welders were presented with low iron stores, and MnB and SF were not correlated (r=0.07, 95% CI −0.05 to 0.20). Regression models revealed a significant association of the parent metal with MnB and SF, but a low fraction of variance was explained by exposure-related factors. Mn is mainly respirable in welding fumes. Airborne Mn and Fe influenced MnB and SF, respectively, in welders. This indicates an effect on the biological regulation of both metals. Mn and Fe were strongly correlated, whereas MnB and SF were not, likely due to higher iron stores among welders.

Levels and predictors of airborne and internal exposure to manganese and iron among welders

The work reported here evaluates the effectiveness of various rates of dilution ventilation in controlling welder exposures to manganese in shielded metal arc welding (SMAW) fume when working in enclosed or restricted spaces. Personal and area monitoring using total and respirable sampling techniques, along with multiple analytical techniques, was conducted during the welding operations. With 2000 cubic feet per minute (CFM) (56.63 m 3 /min) dilution ventilation, personal breathing zone concentrations for the welder using 1/8″ (3.18 mm) E6010 and E7018 mild steel electrodes were within 75% of the existing threshold limit value (TLV® of 0.2 mg/m 3 for total manganese and were five times greater than the 2001–2003 proposed respirable manganese TLV of 0.03 mg/m 3 . Manganese concentrations using high manganese content electrodes were five times greater than those for E6010 and E7018 electrodes. Area samples upstream and downstream of the welder using E6010 and E7018 electrodes exceeded 0.2 mg/m3 manganese. C...

Michael D. Mount

Papers

Manganese Exposures During Shielded Metal Arc Welding (SMAW) in an Enclosed Space