This paper proposes COPE, a new architecture for wireless mesh networks. In addition to forwarding packets, routers mix (i.e., code) packets from different sources to increase the information content of each transmission. We show that intelligently mixing packets increases network throughput. Our design is rooted in the theory of network coding. Prior work on network coding is mainly theoretical and focuses on multicast traffic. This paper aims to bridge theory with practice; it addresses the common case of unicast traffic, dynamic and potentially bursty flows, and practical issues facing the integration of network coding in the current network stack. We evaluate our design on a 20-node wireless network, and discuss the results of the first testbed deployment of wireless network coding. The results show that using COPE at the forwarding layer, without modifying routing and higher layers, increases network throughput. The gains vary from a few percent to several folds depending on the traffic pattern, congestion level, and transport protocol.

/pdf/xors-in-the-air-practical-wireless-network-coding-17k31b3st4.pdf

XORs in the air: practical wireless network coding

This paper discusses the design of a single channel full-duplex wireless transceiver. The design uses a combination of RF and baseband techniques to achieve full-duplexing with minimal effect on link reliability. Experiments on real nodes show the full-duplex prototype achieves median performance that is within 8% of an ideal full-duplexing system. This paper presents Antenna Cancellation, a novel technique for self-interference cancellation. In conjunction with existing RF interference cancellation and digital baseband interference cancellation, antenna cancellation achieves the amount of self-interference cancellation required for full-duplex operation. The paper also discusses potential MAC and network gains with full-duplexing. It suggests ways in which a full-duplex system can solve some important problems with existing wireless systems including hidden terminals, loss of throughput due to congestion, and large end-to-end delays.

/pdf/achieving-single-channel-full-duplex-wireless-communication-3pg630e002.pdf

Achieving single channel, full duplex wireless communication

Traditionally, interference is considered harmful. Wireless networks strive to avoid scheduling multiple transmissions at the same time in order to prevent interference. This paper adopts the opposite approach; it encourages strategically picked senders to interfere. Instead of forwarding packets, routers forward the interfering signals. The destination leverages network-level information to cancel the interference and recover the signal destined to it. The result is analog network coding because it mixes signals not bits.So, what if wireless routers forward signals instead of packets? Theoretically, such an approach doubles the capacity of the canonical 2-way relay network. Surprisingly, it is also practical. We implement our design using software radios and show that it achieves significantly higher throughput than both traditional wireless routing and prior work on wireless network coding.

/pdf/embracing-wireless-interference-analog-network-coding-1vuvzsncu8.pdf

Embracing wireless interference: analog network coding

Cognitive radio (CR) is the enabling technology for supporting dynamic spectrum access: the policy that addresses the spectrum scarcity problem that is encountered in many countries. Thus, CR is widely regarded as one of the most promising technologies for future wireless communications. To make radios and wireless networks truly cognitive, however, is by no means a simple task, and it requires collaborative effort from various research communities, including communications theory, networking engineering, signal processing, game theory, software-hardware joint design, and reconfigurable antenna and radio-frequency design. In this paper, we provide a systematic overview on CR networking and communications by looking at the key functions of the physical (PHY), medium access control (MAC), and network layers involved in a CR design and how these layers are crossly related. In particular, for the PHY layer, we will address signal processing techniques for spectrum sensing, cooperative spectrum sensing, and transceiver design for cognitive spectrum access. For the MAC layer, we review sensing scheduling schemes, sensing-access tradeoff design, spectrum-aware access MAC, and CR MAC protocols. In the network layer, cognitive radio network (CRN) tomography, spectrum-aware routing, and quality-of-service (QoS) control will be addressed. Emerging CRNs that are actively developed by various standardization committees and spectrum-sharing economics will also be reviewed. Finally, we point out several open questions and challenges that are related to the CRN design.

Cognitive radio networking and communications: an overview

This paper proposes COPE, a new architecture for wireless mesh networks. In addition to forwarding packets, routers mix (i.e., code) packets from different sources to increase the information content of each transmission. We show that intelligently mixing packets increases network throughput. Our design is rooted in the theory of network coding. Prior work on network coding is mainly theoretical and focuses on multicast traffic. This paper aims to bridge theory with practice; it addresses the common case of unicast traffic, dynamic and potentially bursty flows, and practical issues facing the integration of network coding in the current network stack. We evaluate our design on a 20-node wireless network, and discuss the results of the first testbed deployment of wireless network coding. The results show that COPE largely increases network throughput. The gains vary from a few percent to several folds depending on the traffic pattern, congestion level, and transport protocol.

/pdf/xors-in-the-air-practical-wireless-network-coding-39etlzp2kc.pdf

Opportunistic routing is a recent technique that achieves high throughput in the face of lossy wireless links. The current opportunistic routing protocol, ExOR, ties the MAC with routing, imposing a strict schedule on routers' access to the medium. Although the scheduler delivers opportunistic gains, it misses some of the inherent features of the 802.11 MAC. For example, it prevents spatial reuse and thus may underutilize the wireless medium. It also eliminates the layering abstraction, making the protocol less amenable to extensions to alternate traffic types such as multicast.This paper presents MORE, a MAC-independent opportunistic routing protocol. MORE randomly mixes packets before forwarding them. This randomness ensures that routers that hear the same transmission do not forward the same packets. Thus, MORE needs no special scheduler to coordinate routers and can run directly on top of 802.11. Experimental results from a 20-node wireless testbed show that MORE's median unicast throughput is 22% higher than ExOR, and the gains rise to 45% over ExOR when there is a chance of spatial reuse. For multicast, MORE's gains increase with the number of destinations, and are 35-200% greater than ExOR.

/pdf/trading-structure-for-randomness-in-wireless-opportunistic-284e2q0xeo.pdf

Michael Jennings

Papers

Trading structure for randomness in wireless opportunistic routing

MORE: A Network Coding Approach to Opportunistic Routing