A method and an apparatus for transmitting broadcast signals thereof are disclosed. The method for transmitting broadcast signals includes encoding DP data according to a code rate, wherein the encoding further includes LDPC encoding the DP data according to the code rate, bit interleaving the LDPC encoded DP data, mapping the bit interleaved DP data onto constellations, MIMO (Multi Input Multi Output) encoding the mapped DP data, and time interleaving the MIMO encoded DP data; building at least one signal frame by arranging the encoded DP data; and modulating data in the built signal frame by OFDM method and transmitting the broadcast signals having the modulated data, wherein the step of modulating includes inserting CPs in the built signal frame based on a CP set which includes information about locations of CPs, wherein the CP set is defined based on FFT size.

Apparatus for transmitting broadcast signals, apparatus for receiving broadcast signals, method for transmitting broadcast signals and method for receiving broadcast signals

A mesh network of wired and/or wireless nodes is described in which a centralized controller provides seamless end-to-end service from the edge of the mesh network to mesh nodes located proximate to subscriber devices. The controller operates to provide a central configuration point for configuring forwarding planes of the mesh nodes of the mesh network, so as to set up transport data channels to transport traffic from the edge nodes via the mesh nodes to the subscriber devices.

Mesh network of simple nodes with centralized control

Communication quality is prevented from being deteriorated due to interference caused by low accuracy of channel information or interference from another base station or another wireless communication system. A wireless communication system includes a first wireless station including a plurality of antenna elements, transmission units corresponding to the plurality of antenna elements, and a transmission directivity control unit that controls transmission directivity of the plurality of antenna elements, and a plurality of second wireless stations each including a reception power measurement unit that measures a reception power. The transmission directivity control unit determines the transmission directivity of each of the plurality of antenna elements so that a signal does not reach a particular second wireless station among the plurality of second wireless stations. The transmission units generate wireless signals using the transmission directivity. The plurality of antenna elements transmit the generated wireless signals. The reception power measurement unit measures the reception power in a period that is set so that a signal does not reach the particular second wireless station, and detect the presence or absence of interference.

Wireless communication system and wireless communication method

A method is provided in one example embodiment and includes receiving a request associated with a flow over a wireless link, where the request specifies resource requirements for the flow. The method also includes mapping an Internet protocol (IP) flow description to a plurality of tunnel IP addresses, and mapping a framed IP address to an access point (AP) tunnel endpoint address in order to establish a quality of service (QoS) for tunneled traffic.

Providing integrated end-to-end architecture that includes quality of service transport for tunneled traffic

Dynamic control channel establishment for an access network is described in which a centralized controller provides seamless end-to-end service from a core-facing edge of a network to access nodes. For example, a method includes receiving, by the centralized controller, a discover message originating from a network node, which includes an intermediate node list that specifies a plurality of network nodes the discover message traversed from the network node to an edge node, determining, based on the plurality of nodes specified by the discover message, a path from the edge node to the network node, allocating each of a plurality of Multi-protocol Label Switching (MPLS) labels to a respective outgoing interface of each of the plurality of network nodes, and outputting one or more control messages for configuring the network node, wherein the control messages are encapsulated within a label stack comprising the allocated plurality of labels.

Dynamic control channel establishment for software-defined networks having centralized control

A method and apparatus for staggercasting are described including encoding and compressing a first data sequence, packetizing the compressed encoded data sequence to form a data packet, performing forward error correction (FEC) encoding on the data packet in order to generate a second data sequence related to the first data sequence, appending FEC control information as padding to the end of payload data of the data packet, packetizing the second data sequence to form a packet, multicasting the data packet to a first multicast group, multicasting the packet formed using the second data sequence delayed by an offset time to a second multicast group.

Recovery from burst packet loss in internet protocol based wireless networks using staggercasting and cross-packet forward error correction

A method and apparatus are described including collecting network information, determining an association, bandwidth allocation and routing scheme based on the collected network information, notifying a mesh access point of the association, the bandwidth allocation and the routing scheme and notifying a client node of its association information. Also described are a method and apparatus including measuring link quality and channel conditions, reporting results of the measuring act to a controller, receiving a routing decision and data forwarding instructions from the controller and forwarding the routing decision and the data forwarding instructions to a client node. Further described are a method and apparatus including measuring link quality and channel conditions, reporting results of the measuring act to a controller, receiving association instructions from the centralized controller and updating previously stored association instructions with the received association instructions.

Joint association, routing and rate allocation in wireless multi-hop mesh networks

A method and system for transmitting data are described including packetizing the data, performing forward error correction (FEC) encoding on the packetized data in order to generate one parity packet, appending FEC information as padding to the end of payload data of the packetized data and transmitting the packetized data and the parity packet. Also described are a method and system for recovering from loss of a packet including receiving a data packet, receiving one parity packet, buffering the received data packet, detecting packet loss, forward error correction decoding the parity packet to recover from packet loss using forward error correction information extracted from the data packet and from the parity packet and forwarding the recovered packet via an internal socket. Also described is a method for stagger casting.

Recovery of outburst packet lose in wireless network based on Internet protocol using interleaving play and crossover packet forward error correction

Because packets dropped due to network congestion cannot reach the intended receiver whereas corrupted packets can still be received, the reception status of multiple packets is different for congested and non-congested paths. This difference reflects a spatial variation in the received data stream that is indicative of congestion. Network congestion detection is described that treats the reception status of sequences of multiple packets as patterns and converts the problem of congestion detection into a two-class pattern classification problem. A Support Vector Machine (SVM) classifier is trained to classify the reception status of sequences of packets as being indicative or not of network congestion. If network congestion is detected, congestion control measures can then be taken. Extensive simulations demonstrate high detection accuracy under different network parameters.

End-to-end pattern classification based congestion detection using SVM

PROBLEM TO BE SOLVED: To provide integration of association, routing and rate allocation in a fair manner, regarding a wireless municipal mesh network.SOLUTION: The present invention includes collecting network information, determining an association, bandwidth allocation and routing scheme on the basis of the collected network information, notifying a mesh access point of the association, the bandwidth allocation and the routing scheme, and notifying a client node of association information of the client node. Also, the present invention includes measuring link quality and channel conditions, reporting the results to a controller, receiving association instructions from a centralized controller, and updating previously stored association instructions with the received association instructions.

Mingquan Wu

Papers

Recovery from burst packet loss in internet protocol based wireless networks using staggercasting and cross-packet forward error correction

Joint association, routing and rate allocation in wireless multi-hop mesh networks

Recovery of outburst packet lose in wireless network based on Internet protocol using interleaving play and crossover packet forward error correction

End-to-end pattern classification based congestion detection using SVM

Integration of association, routing and rate allocation in wireless multi-hop mesh network