A Marx generator using MOSFET switches was built and studied in this paper for water purification. In order to replace the spark gap type of pulse power sources, with miss fire problems and short mechanical lifetime. In case of Marx Generator which generates negative pulses, a maximum output voltage of 3.6 kV, rise time of 40 ns and pulse width of 600 ns, was obtained. Discharge energy of one pulse was about 801 μJ for negative polarity at -2.4 kV. In case of positive pulses, a maximum output voltage of 3.6 kV, rise time of 75 ns and pulse width of 750 ns, was obtained. Discharge energy of one pulse was about 1120 μJ at 2.4 kV. The discharge was generated in bubbling water using a Marx Generator with MOSFET switches. The discoloration of indigo carmine solution was carried out to investigate the feasibility of low voltage discharge in bubbling water. As a result, indigo carmine solution was decolorized, although the discharge voltage was about -2.4 kV. The treatment performance was improved when oxygen was fed in the solution. The discoloration rate was 100 % after treatment time of 15 min with oxygen used as carrier gas. Emission of OH was confirmed and considered to play a role for water purification.

Study of Water Purification with Pulsed Power Supply using MOSFET Switches

Present and Future of Semiconductor Pulsed Power Generator ̃Role of Power Semiconductor Devices in Plasma Research̃ 5.High-Repetition-Rate Marx Generator Using Thyristor Switches

Mitsuaki Maeyama

Papers

Present and Future of Semiconductor Pulsed Power Generator ̃Role of Power Semiconductor Devices in Plasma Research̃ 5.High-Repetition-Rate Marx Generator Using Thyristor Switches