A wireless telecommunication system comprises base stations for communicating with terminal devices. One or more base stations support a power boost operating mode in which a base station's available transmission power is concentrated in a subset of its available transmission resources to provide enhanced transmission powers as compared to transmission powers on these transmission resources when the base station is not operating in the power boost mode. A base station establishes an extent to which one or more base stations in the wireless telecommunications system support the power boost operating mode conveys an indication of this to a terminal device. The terminal device receives the indication and uses the corresponding information to control its acquisition of a base station of the wireless telecommunication system, for example by taking account of which base stations support power boosting and/or when power boosting is supported during a cell attach procedure.

Telecommunications apparatus and methods

In a mobile communication method by which a mobile station (UE) transmits a control signal to a radio base station (eNB) in an uplink by using an uplink dedicated resource, different methods for determining whether or not a synchronization state is established in the uplink, are used depending on whether or not the uplink dedicated resource is set up.

Mobile communication method and radio base station

The object is achieved by providing a base station apparatus for performing time and frequency scheduling in uplink packet access with: an interference amount measurement part configured to measure an uplink interference amount for each interference amount measurement unit which comprises a predetermined period and a predetermined number of frequency blocks; an interference amount determination part configured to determine whether the uplink interference amount satisfies a predetermined condition; and an overload indicator reporting part configured to report an overload indicator to a neighboring cell when the predetermined condition is satisfied.

Base station apparatus and communication control method

Different types of traffic requiring different inactivity timer settings are assigned to different bearers or to different QoS classes. Different inactivity timer settings are established for different traffic types. Individual bearers or individual QoS classes are linked to a corresponding inactivity timer profile. The link may be accomplished in a number of ways. For example, an additional QoS parameter may be employed in a 3GPP QoS profile, or a new QoS class identifier may be mapped to an inactivity timer setting. Different inactivity timer settings allows both UE battery power conservation to be prioritized for some traffic and end-user experience (quick subsequent response times) to be prioritized for other traffic.

Inactivity monitoring for different traffic or service classifications

Methods and systems for transmitting uplink control information and feedback are disclosed for carrier aggregation systems. A user equipment device may be configured to transmit uplink control information and other feedback for several downlink component carriers using one or more uplink component carriers. The user equipment device may be configured to transmit such data using a physical uplink control channel rather than a physical uplink shared channel. The user equipment device may be configured to determine the uplink control information and feedback data that is to be transmitted, the physical uplink control channel resources to be used to transmit the uplink control information and feedback data, and how the uplink control information and feedback data may be transmitted over the physical uplink control channel.

Uplink control data transmission

A method and apparatus for cooperation in wireless communications. Cooperation is considered among a number of network elements, including at least one wireless transmit-receive unit, at least one relay station, and at least one base station.

Method and apparatus for cooperative wireless communications

A method and a wireless transmit/receive unit (WTRU), including a universal subscriber identity module (USIM), for identifying a closed subscriber group (CSG) cell are disclosed. The WTRU receives a broadcast from a cell including a cell identifier (ID). If the cell ID is associated with a CSG cell, the WTRU determines whether the CSG ID is programmed in the USIM. The cell broadcast may include a single bit information element (IE) indicating that the cell is a CSG cell. If the cell ID is a CSG ID, the cell ID may further include a plurality of fields which indicate at least one of a country, a region, an operator, and a home evolved Node-B (HeNB) number. The cell broadcast may further include a bit indicating whether the CSG cell is public or private. The cell broadcast may further include a bit indicating that emergency calls are allowed from all users.

Wireless communication method and apparatus for performing home node-b identification and access restriction

A method for performing cell reselection first determines a current cell selection quality value. The cell selection quality value is compared to a predetermined threshold. Measurements of neighboring cells are taken if the cell selection quality value is less than or equal to the predetermined threshold. Measurements can be taken of intra-frequency cells, inter-frequency cells, and inter-radio access technology cells. If a neighboring cell is found that is better than the current cell based on the measurements, then the better neighbor cell is reselected to.

Method for inter-radio access technology cell reselection

Various methods for adjusting a reselection timer and cell ranking criteria are disclosed. The ranking criteria of a serving or neighbor cell, or a reselection timer in a wireless transmit/receive unit (WTRU), is adjusted based on how a serving cell signal measurement, (e.g., signal strength, signal quality), compares to a plurality of thresholds over a time interval. In another method, cell ranking criteria is adjusted based on a hysteresis value and a scaling factor when a maximum number of reselections is exceeded and a high mobility factor is detected. Furthermore, a method of reporting cell signal measurements is disclosed, whereby a time-to-trigger time (TTT) interval is started when the neighbor cell signal measurement rises above a reporting range threshold. If the serving cell signal measurement falls below a serving cell threshold, the TTT interval is adjusted and thereby a measurement report is transmitted during the TTT interval.

Method and apparatus for adjusting a reselection timer and cell ranking criteria, and reporting degraded signal measurement of a serving cell

A method of cell reselection in a wireless communications system where parameters are transmitted by the network in system information blocks to WTRU's on the network. Parameters are either added or subtracted from an equation representing the signal power and/or quality of a cell. Parameters may be prioritized. The results of the calculations are used to rank the servicing cell and neighboring cells. If a neighboring cell has a higher quality than the servicing cell, then the WTRU reselects the better cell. The network may transmit a blacklist of cells where the WTRU cannot camp as well as a barring timer for each cell where if the timer expires, the cell may again be considered for reselection. Information germane to the reselection decision may be transmitted and used by the network.

Mohammed Sammour

Papers

Method and apparatus for cooperative wireless communications

Wireless communication method and apparatus for performing home node-b identification and access restriction

Method for inter-radio access technology cell reselection

Method and apparatus for adjusting a reselection timer and cell ranking criteria, and reporting degraded signal measurement of a serving cell

Cell reselection process for wireless communications