Preface. About the Author. List of Symbols. 1 Introduction. 1.1 Classification of Power Supplies. 1.2 Basic Functions of Voltage Regulators. 1.3 Power Relationships in DC-DC Converters. 1.4 DC Transfer Functions of DC-DC Converters. 1.5 Static Characteristics of DC Voltage Regulators. 1.6 Dynamic Characteristics of DC Voltage Regulators. 1.7 Linear Voltage Regulators. 1.8 Topologies of PWM DC-DC Converters 1.9 Relationships among Current, Voltage, Energy, and Power. 1.10 Electromagnetic Compatibility. 1.11 Summary. 1.12 References. 1.13 Review Questions. 1.14 Problems. 2 BuckPWMDC-DCConverter. 2.1 Introduction. 2.2 DC Analysis of PWM Buck Converter for CCM. 2.3 DC Analysis of PWM Buck Converter for DCM. 2.4 Buck Converter with Input Filter. 2.5 Buck Converter with Synchronous Rectifier. 2.6 Buck Converter with Positive Common Rail. 2.7 Tapped-Inductor Buck Converters. 2.8 Multiphase Buck Converter. 2.9 Summary. 2.10 References. 2.11 Review Questions. 2.12 Problems. 3 Boost PWM DC-DC Converter. 3.1 Introduction. 3.2 DC Analysis of PWM Boost Converter for CCM. 3.3 DC Analysis of PWM Boost Converter for DCM. 3.4 Bidirectional Buck and Boost Converters. 3.5 Tapped-Inductor Boost Converters. 3.6 Duality. 3.7 Power Factor Correction. 3.8 Summary. 3.9 References. 3.10 Review Questions. 3.11 Problems. 4 Buck-Boost PWM DC-DC Converter. 4.1 Introduction. 4.2 DC Analysis of PWM Buck-Boost Converter for CCM. 4.3 DC Analysis of PWM Buck-Boost Converter for DCM. 4.4 Bidirectional Buck-Boost Converter. 4.5 Synthesis of Buck-Boost Converter. 4.6 Synthesis of Boost-Buck (Cuk) Converter. 4.7 Noninverting Buck-Boost Converters. 4.8 Tapped-Inductor Buck-Boost Converters. 4.9 Summary. 4.10 References. 4.11 Review Questions. 4.12 Problems. 5 Flyback PWM DC-DC Converter. 5.1 Introduction. 5.2 Transformers. 5.3 DC Analysis of PWM Flyback Converter for CCM. 5.4 DC Analysis of PWM Flyback Converter for DCM. 5.5 Multiple-Output Flyback Converter. 5.6 Bidirectional Flyback Converter. 5.7 Ringing in Flyback Converter. 5.8 Flyback Converter with Active Clamping. 5.9 Two-Transistor Flyback Converter. 5.10 Summary. 5.11 References. 5.12 Review Questions. 5.13 Problems. 6 Forward PWM DC-DC Converter. 6.1 Introduction. 6.2 DC Analysis of PWM Forward Converter for CCM. 6.3 DC Analysis of PWM Forward Converter for DCM. 6.4 Multiple-Output Forward Converter. 6.5 Forward Converter with Synchronous Rectifier. 6.6 Forward Converters with Active Clamping. 6.7 Two-Switch Forward Converter. 6.8 Summary. 6.9 References. 6.10 Review Questions. 6.11 Problems. 7 Half-Bridge PWM DC-DC Converter. 7.1 Introduction. 7.2 DC Analysis of PWM Half-Bridge Converter for CCM. 7.3 DC Analysis of PWM Half-Bridge Converter for DCM. 7.4 Summary. 7.5 References. 7.6 Review Questions. 7.7 Problems. 8 Full-Bridge PWM DC-DC Converter. 8.1 Introduction. 8.2 DC Analysis of PWM Full-Bridge Converter for CCM. 8.3 DC Analysis of PWM Full-Bridge Converter for DCM. 8.4 Phase-Controlled Full-Bridge Converter. 8.5 Summary. 8.6 References. 8.7 Review Questions. 8.8 Problems. 9 Push-Pull PWM DC-DC Converter. 9.1 Introduction. 9.2 DC Analysis of PWM Push-Pull Converter for CCM. 9.3 DC Analysis of PWM Push-Pull Converter for DCM. 9.4 Comparison of PWM DC-DC Converters. 9.5 Summary. 9.6 References. 9.7 Review Questions. 9.8 Problems. 10 Small-Signal Models of PWM Converters for CCM and DCM. 10.1 Introduction. 10.2 Assumptions. 10.3 Averaged Model of Ideal Switching Network for CCM. 10.4 Averaged Values of Switched Resistances. 10.5 Model Reduction. 10.6 Large-Signal Averaged Model for CCM. 10.7 DC and Small-Signal Circuit Linear Models of Switching Network for CCM. 10.8 Family of PWM Converter Models for CCM. 10.9 PWM Small-Signal Switch Model for CCM. 10.10 Modeling of the Ideal Switching Network for DCM. 10.11 Averaged Parasitic Resistances for DCM. 10.12 Small-Signal Models of PWM Converters for DCM. 10.13 Summary. 10.14 References. 10.15 Review Questions. 10.16 Problems. 11 Open-Loop Small-Signal Characteristics of Boost Converter for CCM. 11.1 Introduction. 11.2 DC Characteristics. 11.3 Open-Loop Control-to-Output Transfer Function. 11.4 Delay in Open-Loop Control-to-Output Transfer Function. 11.5 Open-Loop Audio Susceptibility. 11.6 Open-Loop Input Impedance. 11.7 Open-Loop Output Impedance. 11.8 Open-Loop Step Responses. 11.9 Summary. 11.10 References. 11.11 Review Questions. 11.12 Problems. 12 Voltage-Mode Control of Boost Converter. 12.1 Introduction. 12.2 Circuit of Boost Converter with Voltage-Mode Control. 12.3 Pulse-Width Modulator. 12.4 Transfer Function of Modulator, Boost Converter Power Stage, and Feedback Network. 12.5 Error Amplifier. 12.6 Integral-Single-Lead Controller. 12.7 Integral-Double-Lead Controller. 12.8 Loop Gain. 12.9 Closed-Loop Control-to-Output Voltage Transfer Function. 12.10 Closed-Loop Audio Susceptibility. 12.11 Closed-Loop Input Impedance. 12.12 Closed-Loop Output Impedance. 12.13 Closed-Loop Step Responses. 12.14 Closed-Loop DC Transfer Functions. 12.15 Summary. 12.16 References. 12.17 Review Questions. 12.18 Problems. 13 Current-Mode Control. 13.1 Introduction. 13.2 Principle of Operation of PWM Converters with Peak-Current-Mode Control. 13.3 Relationship between Duty Cycle and Inductor-Current Slopes. 13.4 Instability of Closed-Current Loop. 13.5 Slope Compensation. 13.6 Sample-and-Hold Effect on Current Loop. 13.7 Current Loop in s -Domain. 13.8 Voltage Loop of PWM Converters with Current-Mode Control. 13.9 Feedforward Gains in PWM Converters with Current-Mode Control without Slope Compensation. 13.10 Feedforward Gains in PWM Converters with Current-Mode Control and Slope Compensation. 13.11 Closed-Loop Transfer Functions with Feedforward Gains. 13.12 Slope Compensation by Adding a Ramp to Inductor Current. 13.13 Relationships for Constant-Frequency Current-Mode On-Time Control. 13.14 Summary. 13.15 References. 13.16 Review Questions. 13.17 Problems. 13.18 Appendix: Sample-and-Hold Modeling. 14 Current-Mode Control of Boost Converter. 14.1 Introduction. 14.2 Open-Loop Small-Signal Transfer Functions. 14.3 Open-Loop Step Responses of Inductor Current. 14.5 Closed-Voltage-Loop Transfer Functions. 14.6 Closed-Loop Step Responses. 14.7 Closed-Loop DC Transfer Functions. 14.8 Summary. 14.9 References. 14.10 Review Questions. 14.11 Problems. 15 Silicon and Silicon Carbide Power Diodes. 15.1 Introduction. 15.2 Electronic Power Switches. 15.3 Intrinsic Semiconductors. 15.4 Extrinsic Semiconductors. 15.5 Silicon and Silicon Carbide. 15.6 Physical Structure of Junction Diodes. 15.7 Static I - V Diode Characteristic. 15.8 Breakdown Voltage of Junction Diodes. 15.9 Capacitances of Junction Diodes. 15.10 Reverse Recovery of pn Junction Diodes. 15.11 Schottky Diodes. 15.12 SPICE Model of Diodes. 15.13 Summary. 15.14 References. 15.15 Review Questions. 15.16 Problems. 16 Silicon and Silicon Carbide Power MOSFETs. 16.1 Introduction. 16.2 Physical Structure of Power MOSFETs. 16.3 Principle of Operation of Power MOSFETs. 16.4 Derivation of Power MOSFET Characteristics. 16.5 Power MOSFET Characteristics. 16.6 Mobility of Charge Carriers. 16.7 Short-Channel Effects. 16.8 Aspect Ratio of Power MOSFETs. 16.9 Breakdown Voltage of Power MOSFETs. 16.10 Gate Oxide Breakdown Voltageof Power MOSFETs. 16.11 Resistance of Drift Region. 16.12 Figures-of-Merit. 16.13 On-Resistance of Power MOSFETs. 16.14 Capacitances of Power MOSFETs. 16.15 Switching Waveforms. 16.16 SPICE Model of Power MOSFETs. 16.17 Insulated Gate Bipolar Transistors. 16.18 Heat Sinks. 16.19 Summary. 16.20 References. 16.21 Review Questions. 16.22 Problems. 17 Soft-Switching DC-DC Converters. 17.1 Introduction. 17.2 Zero-Voltage-Switching DC-DC Converters. 17.3 Buck ZVS Quasi-Resonant DC-DC Converter. 17.4 Boost ZVS Quasi-Resonant DC-DC Converter. 17.5 Zero-Current-Switching DC-DC Converters. 17.6 Boost ZCS Quasi-Resonant DC-DC Converter. 17.7 Multiresonant Converters. 17.8 Summary. 17.9 References. 17.10 Review Questions. 17.11 Problems. Appendix A Introduction to SPICE. Appendix B Introduction to MATLAB. Answers to Problems. Index.

Pulse-width modulated DC-DC power converters

This paper presents a single-phase five-level photovoltaic (PV) inverter topology for grid-connected PV systems with a novel pulsewidth-modulated (PWM) control scheme. Two reference signals identical to each other with an offset equivalent to the amplitude of the triangular carrier signal were used to generate PWM signals for the switches. A digital proportional-integral current control algorithm is implemented in DSP TMS320F2812 to keep the current injected into the grid sinusoidal and to have high dynamic performance with rapidly changing atmospheric conditions. The inverter offers much less total harmonic distortion and can operate at near-unity power factor. The proposed system is verified through simulation and is implemented in a prototype, and the experimental results are compared with that with the conventional single-phase three-level grid-connected PWM inverter.

Multilevel Inverter For Grid-Connected PV System Employing Digital PI Controller

Distributed generation (DG) units are rapidly increasing and most of them are interconnected with distribution network to supply power into the network as well as local loads. Islanding operations of DG usually occur when power supply from the main utility is interrupted due to several reasons but the DG keeps supplying power into the distribution networks. These kinds of islanding conditions cause negative impacts on protection, operation, and management of distribution systems; therefore, it is necessary to effectively detect the islanding conditions and swiftly disconnect DG from distribution network. Generally, if there are large changes in loading for DG after loss of the main power supply, then islanding conditions are easily detected by monitoring several parameters: voltage magnitude, phase displacement, and frequency change. However, in case of small changes in loading for DG, the conventional methods have some difficulty in detecting such a particular islanding condition. This paper presents a new islanding detection algorithm for DG effectively working in the most of DG loading conditions. This paper proposes two new parameters for detecting islanding operation of DG: voltage unbalance and total harmonic distortion of current. The proposed method effectively combines the conventional parameters with the newly proposed parameters for detecting the islanding conditions. The proposed methods were verified using the radial distribution network of IEEE 34 bus.

An islanding detection method for distributed generations using voltage unbalance and total harmonic distortion of current

Application of multilevel inverters for higher power purposes in industries has become more popular. This is partly because of high-quality output waveform of multilevel inverters in comparison with two-level inverters. In this paper, initially a new topology for submultilevel inverter is proposed and then series connection of the submultilevel inverters is proposed as a generalized multilevel inverter. The proposed multilevel inverter uses reduced number of switching devices. Special attention has been paid to obtain optimal structures regarding different criteria such as number of switches, standing voltage on the switches, number of dc voltage sources, etc. The proposed multilevel inverter has been analyzed in both symmetric and asymmetric conditions. The validity of the proposed multilevel inverter is verified with both computer simulations using PSCAD/EMTDC software and laboratory prototype implementation.

A Generalized Cascaded Multilevel Inverter Using Series Connection of Submultilevel Inverters

Passivity-based controllers for the stabilization of DC-to-DC power converters

1. Introduction. 2. Power Semiconductor Diodes and Circuits. 3. Diode Rectifiers. 4. Power Transistors. 5. DC-DC Converters. 6. Pulse-width Modulated Inverters. 7. Thyristors. 8. Resonant Pulse Inverters. 9. Multilevel Inverters. 10. Controlled Rectifiers. 11. AC Voltage Controllers. 12. Static Switches. 13. Flexible AC Transmission Systems. 14. Power Supplies. 15. DC Drives. 16. AC Drives. 17. Gate Drive Circuits. 18. Protection of Devices and Circuits. Appendices: Three-phase Circuits, Magnetic Circuits, Switching Functions of Converters, DC Transient Analysis, Fourier Analysis, Thyristor Commutation Techniques, Data Sheets.

Muhammad Harunur Rashid

Papers

Power Electronics: Circuits, Devices and Applications