The purpose of this Position Stand is to provide guidance to professionals who counsel and prescribe individualized exercise to apparently healthy adults of all ages. These recommendations also may apply to adults with certain chronic diseases or disabilities, when appropriately evaluated and advised by a health professional. This document supersedes the 1998 American College of Sports Medicine (ACSM) Position Stand, "The Recommended Quantity and Quality of Exercise for Developing and Maintaining Cardiorespiratory and Muscular Fitness, and Flexibility in Healthy Adults." The scientific evidence demonstrating the beneficial effects of exercise is indisputable, and the benefits of exercise far outweigh the risks in most adults. A program of regular exercise that includes cardiorespiratory, resistance, flexibility, and neuromotor exercise training beyond activities of daily living to improve and maintain physical fitness and health is essential for most adults. The ACSM recommends that most adults engage in moderate-intensity cardiorespiratory exercise training for ≥30 min·d on ≥5 d·wk for a total of ≥150 min·wk, vigorous-intensity cardiorespiratory exercise training for ≥20 min·d on ≥3 d·wk (≥75 min·wk), or a combination of moderate- and vigorous-intensity exercise to achieve a total energy expenditure of ≥500-1000 MET·min·wk. On 2-3 d·wk, adults should also perform resistance exercises for each of the major muscle groups, and neuromotor exercise involving balance, agility, and coordination. Crucial to maintaining joint range of movement, completing a series of flexibility exercises for each the major muscle-tendon groups (a total of 60 s per exercise) on ≥2 d·wk is recommended. The exercise program should be modified according to an individual's habitual physical activity, physical function, health status, exercise responses, and stated goals. Adults who are unable or unwilling to meet the exercise targets outlined here still can benefit from engaging in amounts of exercise less than recommended. In addition to exercising regularly, there are health benefits in concurrently reducing total time engaged in sedentary pursuits and also by interspersing frequent, short bouts of standing and physical activity between periods of sedentary activity, even in physically active adults. Behaviorally based exercise interventions, the use of behavior change strategies, supervision by an experienced fitness instructor, and exercise that is pleasant and enjoyable can improve adoption and adherence to prescribed exercise programs. Educating adults about and screening for signs and symptoms of CHD and gradual progression of exercise intensity and volume may reduce the risks of exercise. Consultations with a medical professional and diagnostic exercise testing for CHD are useful when clinically indicated but are not recommended for universal screening to enhance the safety of exercise.

/pdf/quantity-and-quality-of-exercise-for-developing-and-1fohxlhqop.pdf

Quantity and Quality of Exercise for Developing and Maintaining Cardiorespiratory, Musculoskeletal, and Neuromotor Fitness in Apparently Healthy Adults: Guidance for Prescribing Exercise

In order to stimulate further adaptation toward specific training goals, progressive resistance training (RT) protocols are necessary The optimal characteristics of strength-specific programs include the use of concentric (CON), eccentric (ECC), and isometric muscle actions and the performance of bilateral and unilateral single- and multiple-joint exercises In addition, it is recommended that strength programs sequence exercises to optimize the preservation of exercise intensity (large before small muscle group exercises, multiple-joint exercises before single-joint exercises, and higher-intensity before lower-intensity exercises) For novice (untrained individuals with no RT experience or who have not trained for several years) training, it is recommended that loads correspond to a repetition range of an 8-12 repetition maximum (RM) For intermediate (individuals with approximately 6 months of consistent RT experience) to advanced (individuals with years of RT experience) training, it is recommended that individuals use a wider loading range from 1 to 12 RM in a periodized fashion with eventual emphasis on heavy loading (1-6 RM) using 3- to 5-min rest periods between sets performed at a moderate contraction velocity (1-2 s CON; 1-2 s ECC) When training at a specific RM load, it is recommended that 2-10% increase in load be applied when the individual can perform the current workload for one to two repetitions over the desired number The recommendation for training frequency is 2-3 d·wk -1 for novice training, 3-4 d·wk -1 for intermediate training, and 4-5 d·wk -1 for advanced training Similar program designs are recommended for hypertrophy training with respect to exercise selection and frequency For loading, it is recommended that loads corresponding to 1-12 RM be used in periodized fashion with emphasis on the 6-12 RM zone using 1- to 2-min rest periods between sets at a moderate velocity Higher volume, multiple-set programs are recommended for maximizing hypertrophy Progression in power training entails two general loading strategies: 1) strength training and 2) use of light loads (0-60% of 1 RM for lower body exercises; 30-60% of 1 RM for upper body exercises) performed at a fast contraction velocity with 3-5 min of rest between sets for multiple sets per exercise (three to five sets) It is also recommended that emphasis be placed on multiple-joint exercises especially those involving the total body For local muscular endurance training, it is recommended that light to moderate loads (40-60% of 1 RM) be performed for high repetitions (>15) using short rest periods (<90 s) In the interpretation of this position stand as with prior ones, recommendations should be applied in context and should be contingent upon an individual's target goals, physical capacity, and training status

/pdf/progression-models-in-resistance-training-for-healthy-adults-1vkvqzcu18.pdf

Progression Models in Resistance Training for Healthy Adults

The purpose of this report is to provide revised standards and guidelines for the exercise testing and training of individuals who are free from clinical manifestations of cardiovascular disease and those with known cardiovascular disease. These guidelines are intended for physicians, nurses, exercise physiologists, specialists, technologists, and other healthcare professionals involved in exercise testing and training of these populations. This report is in accord with the “Statement on Exercise” published by the American Heart Association (AHA).1

These guidelines are a revision of the 1995 standards of the AHA that addressed the issues of exercise testing and training.2 An update of background, scientific rationale, and selected references is provided, and current issues of practical importance in the clinical use of these standards are considered. These guidelines are in accord with the American College of Cardiology (ACC)/AHA Guidelines for Exercise Testing.3

### The Cardiovascular Response to Exercise

Exercise, a common physiological stress, can elicit cardiovascular abnormalities that are not present at rest, and it can be used to determine the adequacy of cardiac function. Because exercise is only one of many stresses to which humans can be exposed, it is more appropriate to call an exercise test exactly that and not a “stress test.” This is particularly relevant considering the increased use of nonexercise stress tests.

### Types of Exercise

Three types of muscular contraction or exercise can be applied as a stress to the cardiovascular system: isometric (static), isotonic (dynamic or locomotory), and resistance (a combination of isometric and isotonic).4,5 Isotonic exercise, which is defined as a muscular contraction resulting in movement, primarily provides a volume load to the left ventricle, and the response is proportional to the size of the working muscle mass and the intensity of exercise. Isometric exercise is defined as a muscular contraction without movement (eg, handgrip) and imposes greater pressure than volume …

Exercise Standards for Testing and Training A Scientific Statement From the American Heart Association

In order to stimulate further adaptation toward a specific training goal(s), progression in the type of resistance training protocol used is necessary. The optimal characteristics of strength-specific programs include the use of both concentric and eccentric muscle actions and the performance of both single- and multiple-joint exercises. It is also recommended that the strength program sequence exercises to optimize the quality of the exercise intensity (large before small muscle group exercises, multiple-joint exercises before single-joint exercises, and higher intensity before lower intensity exercises). For initial resistances, it is recommended that loads corresponding to 8-12 repetition maximum (RM) be used in novice training. For intermediate to advanced training, it is recommended that individuals use a wider loading range, from 1-12 RM in a periodized fashion, with eventual emphasis on heavy loading (1-6 RM) using at least 3-min rest periods between sets performed at a moderate contraction velocity (1-2 s concentric, 1-2 s eccentric). When training at a specific RM load, it is recommended that 2-10% increase in load be applied when the individual can perform the current workload for one to two repetitions over the desired number. The recommendation for training frequency is 2-3 d x wk(-1) for novice and intermediate training and 4-5 d x wk(-1) for advanced training. Similar program designs are recommended for hypertrophy training with respect to exercise selection and frequency. For loading, it is recommended that loads corresponding to 1-12 RM be used in periodized fashion, with emphasis on the 6-12 RM zone using 1- to 2-min rest periods between sets at a moderate velocity. Higher volume, multiple-set programs are recommended for maximizing hypertrophy. Progression in power training entails two general loading strategies: 1) strength training, and 2) use of light loads (30-60% of 1 RM) performed at a fast contraction velocity with 2-3 min of rest between sets for multiple sets per exercise. It is also recommended that emphasis be placed on multiple-joint exercises, especially those involving the total body. For local muscular endurance training, it is recommended that light to moderate loads (40-60% of 1 RM) be performed for high repetitions (> 15) using short rest periods (< 90 s). In the interpretation of this position stand, as with prior ones, the recommendations should be viewed in context of the individual's target goals, physical capacity, and training status.

American College of Sports Medicine Position Stand. Progression Models in Resistance Training for Healthy Adults

During the past decade, skeletal muscle has been identified as a secretory organ. Accordingly, we have suggested that cytokines and other peptides that are produced, expressed and released by muscle fibres and exert either autocrine, paracrine or endocrine effects should be classified as myokines. The finding that the muscle secretome consists of several hundred secreted peptides provides a conceptual basis and a whole new paradigm for understanding how muscles communicate with other organs, such as adipose tissue, liver, pancreas, bones and brain. However, some myokines exert their effects within the muscle itself. Thus, myostatin, LIF, IL-6 and IL-7 are involved in muscle hypertrophy and myogenesis, whereas BDNF and IL-6 are involved in AMPK-mediated fat oxidation. IL-6 also appears to have systemic effects on the liver, adipose tissue and the immune system, and mediates crosstalk between intestinal L cells and pancreatic islets. Other myokines include the osteogenic factors IGF-1 and FGF-2; FSTL-1, which improves the endothelial function of the vascular system; and the PGC-1α-dependent myokine irisin, which drives brown-fat-like development. Studies in the past few years suggest the existence of yet unidentified factors, secreted from muscle cells, which may influence cancer cell growth and pancreas function. Many proteins produced by skeletal muscle are dependent upon contraction; therefore, physical inactivity probably leads to an altered myokine response, which could provide a potential mechanism for the association between sedentary behaviour and many chronic diseases.

Muscles, exercise and obesity: skeletal muscle as a secretory organ

Selected Contents: Chapter 1. Structure and Function of Body Systems Chapter 3. Bioenergetics of Exercise and Training Chapter 5. Adaptations to Anaerobic Training Programs Chapter 8. Psychology of Athletic Preparation and Performance Chapter 9. Basic Nutrition Factors in Health Chapter 11. Performance-Enhancing Substances and Methods Chapter 13. Administration, Scoring, and Interpretation of Selected Tests Chapter 15. Exercise Technique for Free-Weight and Machine Training Chapter 17. Program Design for Resistance Training Chapter 19. Program Design and Technique for Speed and Agility Training Chapter 21. Periodization Chapter 23. Facility Design, Layout, and Organization.

Essentials of strength training and conditioning

Purpose: The influence of various loads on power output in the jump squat (JS), squat (S), and power clean (PC) was examined to determine the load that maximizes power output in each lift.

Methods: Twelve Division I male athletes participated in four testing sessions. The first session involved performing one-repetition maximums (1RM) in the S and PC, followed by three randomized testing sessions involving either the JS, S, or PC. Peak force, velocity, and power were calculated across loads of 0, 12, 27, 42, 56, 71, and 85% of each subject's 1RM in the JS and S and at 10% intervals from 30 to 90% of each subject's 1RM in the PC.

Results: The optimal load for the JS was 0% of 1RM; absolute peak power was significantly lower from the optimal load at 42, 56, 71, and 85% of 1RM (P = 0.05), whereas peak power relative to body mass was significantly lower at 27% of 1RM in addition to 42, 56, 71, and 85% of 1RM. Peak power in the S was maximized at 56% of 1RM; however, power was not significantly different across the loading spectrum. The optimal load in the PC occurred at 80% of 1RM. Relative peak power at 80% of 1RM was significantly different from the 30 and 40% of 1RM.

Conclusion: This investigation indicates that the optimal load for maximal power output occurs at various percentages of 1RM in the JS, S, and PC

Optimal loading for maximal power output during lower-body resistance exercises.

The purpose of this study was to investigate the effects of a single bout of whole-body vibration on isometric squat (IS) and countermovement jump (CMJ) performance. Nine moderately resistance-trained men were tested for peak force (PF) during the IS and jump height (JH) and peak power (PP) during the CMJ. Average integrated electromyography (IEMG) was measured from the vastus medialis, vastus lateralis, and biceps femoris muscles. Subjects performed the 2 treatment conditions, vibration or sham, in a randomized order. Subjects were tested for baseline performance variables in both the IS and CMJ, and were exposed to either a 30-second bout of whole-body vibration or sham intervention. Subjects were tested immediately following the vibration or sham treatment, as well as 5, 15, and 30 minutes posttreatment. Whole-body vibration resulted in a significantly higher (p < or = 0.05) JH during the CMJ immediately following vibration, as compared with the sham condition. No significant differences were observed in CMJ PP; PF during IS or IEMG of the vastus medialis, vastus lateralis, or biceps femoris during the CMJ; or IS between vibration and sham treatments. Whole-body vibration may be a potential warm-up procedure for increasing vertical JH. Future research is warranted addressing the influence of various protocols of whole-body vibration (i.e., duration, amplitude, frequency) on athletic performance.

/pdf/acute-effects-of-whole-body-vibration-on-muscle-activity-45me47e95r.pdf

Acute effects of whole-body vibration on muscle activity, strength, and power.

The purpose of this investigation was to examine the relationship between maximal squat strength and sprinting times. Seventeen Division I-AA male football athletes (height = 1.78 +/- 0.04 m, body mass [BM] = 85.9 +/- 8.8 kg, body mass index [BMI] = 27.0 +/- 2.6 kg/m2, 1 repetition maximum [1RM] = 166.5 +/- 34.1 kg, 1RM/BM = 1.94 +/- 0.33) participated in this investigation. Height, weight, and squat strength (1RM) were assessed on day 1. Within 1 week, 5, 10, and 40 yard sprint times were assessed. Squats were performed to a 70 degree knee angle and values expressed relative to each subject's BM. Sprints were performed on a standard outdoor track surface with timing gates placed at the previously mentioned distances. Statistically significant (p < or = 0.05) correlations were found between squat 1RM/BM and 40 yard sprint times (r = -0.605, p = 0.010, power = 0.747) and 10 yard sprint times (r = -0.544, p = 0.024, power = 0.626). The correlation approached significance between 5 yard sprint times and 1RM/BM (r = -0.4502, p = 0.0698, power = 0.4421). Subjects were then divided into those above 1RM/BM of 2.10 and below 1RM/BM of 1.90. Subjects with a 1RM/BM above 2.10 had statistically significantly lower sprint times at 10 and 40 yards in comparison with those subjects with a 1RM/BM ratio below 1.90. This investigation provides additional evidence of the possible importance of maximal squat strength relative to BM concerning sprinting capabilities in competitive athletes.

/pdf/relationship-between-maximal-squat-strength-and-five-ten-and-55zeaakzsd.pdf

N. Travis Triplett

Papers

Progression Models in Resistance Training for Healthy Adults

Essentials of strength training and conditioning

Optimal loading for maximal power output during lower-body resistance exercises.

Acute effects of whole-body vibration on muscle activity, strength, and power.

Relationship between maximal squat strength and five, ten, and forty yard sprint times.