Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency. DSC research groups have been established around the worl ...

/pdf/dye-sensitized-solar-cells-50b0w2bhsr.pdf

Dye-Sensitized Solar Cells

Recently, dye-sensitized solar cells have attracted much attention relevant to global environmental issues. Thus far, ruthenium(II) bipyridyl complexes have proven to be the most efficient TiO(2) sensitizers in dye-sensitized solar cells. However, a gradual increment in the highest power conversion efficiency has been recognized in the past decade. More importantly, considering that ruthenium is a rare metal, novel dyes without metal or using inexpensive metal are desirable for highly efficient dye-sensitized solar cells. Large pi-aromatic molecules, such as porphyrins, phthalocyanines, and perylenes, are important classes of potential sensitizers for highly efficient dye-sensitized solar cells, owing to their photostability and high light-harvesting capabilities that can allow applications in thinner, low-cost dye-sensitized solar cells. Porphyrins possess an intense Soret band at 400 nm and moderate Q bands at 600 nm. Nevertheless, the poor light-harvesting properties relative to the ruthenium complexes have limited the cell performance of porphyrin-sensitized TiO(2) cells. Elongation of the pi conjugation and loss of symmetry in porphyrins cause broadening and a red shift of the absorption bands together with an increasing intensity of the Q bands relative to that of the Soret band. On the basis of the strategy, the cell performance of porphyrin-sensitized solar cells has been improved intensively by the enhanced light absorption. Actually, some push-pull-type porphyrins have disclosed a remarkably high power conversion efficiency (6-7%) that was close to that of the ruthenium complexes. Phthalocyanines exhibit strong absorption around 300 and 700 nm and redox features that are similar to porphyrins. Moreover, phthalocyanines are transparent over a large region of the visible spectrum, thereby enabling the possibility of using them as "photovoltaic windows". However, the cell performance was poor, owing to strong aggregation and lack of directionality in the excited state. Novel unsymmetrical zinc phthalocyanine sensitizers with "push" and "pull" groups have made it possible to reduce the aggregation on a TiO(2) surface, tune the level of the excited state, and strengthen the electronic coupling between the phthalocyanine core and the TiO(2) surface. As a result, the power conversion efficiency of up to 3.5% has been achieved. Perylenes are well-known as chemically, thermally, and photophysically stable dyes and have been used in various optical devices and applications. Nevertheless, the power conversion efficiency remained low compared to other organic dyes. The origin of such limited cell performance is the poor electron-donating abilities of the perylenes, which makes it difficult to inject electrons from the excited singlet state of the perylenes to the conduction band of the TiO(2) electrode efficiently. Strongly electron-donating perylene carboxylic acid derivatives with amine substituents at their perylene core have allowed us to increase the power conversion efficiency of up to approximately 7% in perylene-sensitized solar cells. The efficiency of large pi-aromatic molecule-sensitized solar cells could be improved significantly if the dyes with larger red and near-infrared absorption could be developed.

Large pi-aromatic molecules as potential sensitizers for highly efficient dye-sensitized solar cells.

Among the several approaches for harnessing solar energy and converting it into electricity, dye-sensitized solar cells (DSSC) represent one of the most promising methods for future large-scale power production from renewable energy sources. In these cells, the sensitizer is one of the key components harvesting solar radiation and converting it into electric current. The electrochemical, photophysical, and ground and excited state properties of the sensitizer play an important role for charge transfer dynamics at the semiconductor interface. Moreover, for long-term stability and practical applications, electrolytes based on the iodine/triiodine couple also suffer from two other disadvantages: the corrosive effect toward the metal electrodes, and the partial absorption of the visible light by triiodine anions. These issues hence constitute one of the reasons that have encouraged the development of alternative iodine-free redox couples in liquid electrolytes for DSSCs.

Meso-Substituted Porphyrins for Dye-Sensitized Solar Cells

Porphyrins as light harvesters in the dye-sensitised TiO2 solar cell

In TiO2-based dye-sensitized nanocrystalline solar cells, efficiencies of up to 11% have been obtained using Ru dyes, but the limited availability of these dyes together with their undesirable environmental impact have led to the search for cheaper and safer organic-based dyes. In this Letter, we report the synthesis, electronic, and photovoltaic properties of novel green porphyrin sensitizers. All six porphyrin dyes give solar cell efficiencies of ≥5%, but the best performing dye under standard global AM 1.5 solar conditions gives a short circuit photocurrent density (jsc) of 14.0 ± 0.20 mA/cm2, an open circuit voltage of 680 ± 30 mV, and a fill factor of 0.74, corresponding to an overall conversion efficiency of 7.1%, which, for porphyrin-based sensitizers, is unprecedented. This same dye gives an efficiency of 3.6% in a solid-state cell with spiro-MeOTAD as the hole transporting component, comparable to solid-state cells incorporating the best performing ruthenium dyes.

https://pubs.acs.org/doi/pdf/10.1021/jp0750598

Highly Efficient Porphyrin Sensitizers for Dye-Sensitized Solar Cells

A series of six new free base porphyrins were synthesized for use as photosensitizers in TiO2 dye-sensitized photo-electrochemical cells. The porphyrin sensitizers are attached to the TiO2 photoelectrode by phosphonic or carboxylic acid anchoring groups. These anchoring groups were placed on different substitution positions on the porphyrin moiety. The new dyes were fully characterized by absorption and emission spectroscopies, electrochemistry and photo-electrochemical spectroscopy. The photo-electrochemical performances of the sensitizers are discussed and compared to the known 5,10,15,20-tetra(4-carboxyphenyl)porphyrin sensitizer. In this study, we show that the nature of the anchoring group (phosphonic or carboxylic acids) has little impact on the photo-electrochemical performance of the cell. However, the substitution position of the anchoring group on the porphyrin strongly influences the monochromatic photon-to-electron conversion efficiency of the resulting cell. The results indicate that the electronic coupling of this type of dye with the d-band of the semiconductor is one of the key parameters in the design of efficient sensitizers.

Nabil El Murr

Papers

Porphyrin dyes for TiO2 sensitization