It is shown that, particularly for terrestrial cellular telephony, the interference-suppression feature of CDMA (code division multiple access) can result in a many-fold increase in capacity over analog and even over competing digital techniques. A single-cell system, such as a hubbed satellite network, is addressed, and the basic expression for capacity is developed. The corresponding expressions for a multiple-cell system are derived. and the distribution on the number of users supportable per cell is determined. It is concluded that properly augmented and power-controlled multiple-cell CDMA promises a quantum increase in current cellular capacity. >

On the capacity of a cellular CDMA system

Sphere Packings, Lattices and Groups

The fifth generation (5G) wireless communication networks are being deployed worldwide from 2020 and more capabilities are in the process of being standardized, such as mass connectivity, ultra-reliability, and guaranteed low latency. However, 5G will not meet all requirements of the future in 2030 and beyond, and sixth generation (6G) wireless communication networks are expected to provide global coverage, enhanced spectral/energy/cost efficiency, better intelligence level and security, etc. To meet these requirements, 6G networks will rely on new enabling technologies, i.e., air interface and transmission technologies and novel network architecture, such as waveform design, multiple access, channel coding schemes, multi-antenna technologies, network slicing, cell-free architecture, and cloud/fog/edge computing. Our vision on 6G is that it will have four new paradigm shifts. First, to satisfy the requirement of global coverage, 6G will not be limited to terrestrial communication networks, which will need to be complemented with non-terrestrial networks such as satellite and unmanned aerial vehicle (UAV) communication networks, thus achieving a space-air-ground-sea integrated communication network. Second, all spectra will be fully explored to further increase data rates and connection density, including the sub-6 GHz, millimeter wave (mmWave), terahertz (THz), and optical frequency bands. Third, facing the big datasets generated by the use of extremely heterogeneous networks, diverse communication scenarios, large numbers of antennas, wide bandwidths, and new service requirements, 6G networks will enable a new range of smart applications with the aid of artificial intelligence (AI) and big data technologies. Fourth, network security will have to be strengthened when developing 6G networks. This article provides a comprehensive survey of recent advances and future trends in these four aspects. Clearly, 6G with additional technical requirements beyond those of 5G will enable faster and further communications to the extent that the boundary between physical and cyber worlds disappears.

/pdf/towards-6g-wireless-communication-networks-vision-enabling-2tj7a36yux.pdf

Towards 6G wireless communication networks: vision, enabling technologies, and new paradigm shifts

The emerging massive/large-scale multiple-input multiple-output (LS-MIMO) systems that rely on very large antenna arrays have become a hot topic of wireless communications. Compared to multi-antenna aided systems being built at the time of this writing, such as the long-term evolution (LTE) based fourth generation (4G) mobile communication system which allows for up to eight antenna elements at the base station (BS), the LS-MIMO system entails an unprecedented number of antennas, say 100 or more, at the BS. The huge leap in the number of BS antennas opens the door to a new research field in communication theory, propagation and electronics, where random matrix theory begins to play a dominant role. Interestingly, LS-MIMOs also constitute a perfect example of one of the key philosophical principles of the Hegelian Dialectics, namely, that “quantitative change leads to qualitative change.” In this treatise, we provide a recital on the historic heritages and novel challenges facing LS-MIMOs from a detection perspective. First, we highlight the fundamentals of MIMO detection, including the nature of co-channel interference (CCI), the generality of the MIMO detection problem, the received signal models of both linear memoryless MIMO channels and dispersive MIMO channels exhibiting memory, as well as the complex-valued versus real-valued MIMO system models. Then, an extensive review of the representative MIMO detection methods conceived during the past 50 years (1965–2015) is presented, and relevant insights as well as lessons are inferred for the sake of designing complexity-scalable MIMO detection algorithms that are potentially applicable to LS-MIMO systems. Furthermore, we divide the LS-MIMO systems into two types, and elaborate on the distinct detection strategies suitable for each of them. The type-I LS-MIMO corresponds to the case where the number of active users is much smaller than the number of BS antennas, which is currently the mainstream definition of LS-MIMO. The type-II LS-MIMO corresponds to the case where the number of active users is comparable to the number of BS antennas. Finally, we discuss the applicability of existing MIMO detection algorithms in LS-MIMO systems, and review some of the recent advances in LS-MIMO detection.

/pdf/fifty-years-of-mimo-detection-the-road-to-large-scale-mimos-44ejto9lpw.pdf

Fifty Years of MIMO Detection: The Road to Large-Scale MIMOs

A new class of low-complexity, yet energy-efficient Multiple-Input Multiple-Output (MIMO) transmission techniques, namely, the family of Spatial Modulation (SM) aided MIMOs (SM-MIMO), has emerged. These systems are capable of exploiting the spatial dimensions (i.e., the antenna indices) as an additional dimension invoked for transmitting information, apart from the traditional Amplitude and Phase Modulation (APM). SM is capable of efficiently operating in diverse MIMO configurations in the context of future communication systems. It constitutes a promising transmission candidate for large-scale MIMO design and for the indoor optical wireless communication while relying on a single-Radio Frequency (RF) chain. Moreover, SM may be also viewed as an entirely new hybrid modulation scheme, which is still in its infancy. This paper aims for providing a general survey of the SM design framework as well as of its intrinsic limits. In particular, we focus our attention on the associated transceiver design, on spatial constellation optimization, on link adaptation techniques, on distributed/cooperative protocol design issues, and on their meritorious variants.

/pdf/design-guidelines-for-spatial-modulation-4di7fcwiu9.pdf

Design Guidelines for Spatial Modulation

In this treatise, a novel modulation scheme aimed for achieving high-rates MIMO systems is proposed, which is termed as 3-Dimensional Shift Keying (3- DSK). In the proposed 3-DSK scheme, the information bits can be mapped onto three distinguished information carriers, namely, spatial domain, matrix domain and signal dimension. Since the novel 3-DSK principle is capable of encoding information bits into three information carriers, high throughout can be achieved. Moreover, this 3-DSK framework subsumes diverse existing MIMO arrangements, such as Spatial Modulation (SM), Generalized Space-Time Shift Keying (GSTSK) scheme and Vertical Bell Lab's Layered Space-Time structure due to its high design flexibility. Additionally, a potential full transmit diversity can be achieved by jointly exploiting the spatial and temporal dimensions. At the receiver, a Maximum Likelihood decoder is adopted in order to jointly recover the information bits. Finally, we demonstrate through numerous simulation results that the 3-DSK architecture is capable of achieving a lower BER performance over SM and GSTSK as well as LDC schemes, while achieving high rates.

3-Dimensional Shift Keying Modulation Schemes for High Rate MIMO Systems

Both faster than Nyquist (FTN) signaling and non-orthogonal multiple access (NOMA) are promising next generation wireless communications techniques as a benefit of their capability of improving the system's spectral efficiency. This paper considers an uplink system that combines the advantages of FTN and NOMA. Consequently, an improved spectral efficiency is achieved by deliberately introducing both inter-symbol interference (ISI) and inter-user interference (IUI). More specifically, we propose a grant-free transmission scheme to reduce the signaling overhead and transmission latency of the considered NOMA system. To distinguish the active and inactive users, we develop a novel message passing receiver that jointly estimates the channel state, detects the user activity, and performs decoding. We conclude by quantifying the significant spectral efficiency gain achieved by our amalgamated FTN-NOMA scheme compared to the orthogonal transmission system, which is up to 87.5%.

Nan Wu

Papers

3-Dimensional Shift Keying Modulation Schemes for High Rate MIMO Systems

Joint Data and Active User Detection for Grant-free FTN-NOMA in Dynamic Networks