Freedom of design, mass customisation, waste minimisation and the ability to manufacture complex structures, as well as fast prototyping, are the main benefits of additive manufacturing (AM) or 3D printing. A comprehensive review of the main 3D printing methods, materials and their development in trending applications was carried out. In particular, the revolutionary applications of AM in biomedical, aerospace, buildings and protective structures were discussed. The current state of materials development, including metal alloys, polymer composites, ceramics and concrete, was presented. In addition, this paper discussed the main processing challenges with void formation, anisotropic behaviour, the limitation of computer design and layer-by-layer appearance. Overall, this paper gives an overview of 3D printing, including a survey on its benefits and drawbacks as a benchmark for future research and development.

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Free vibration analysis of functionally graded carbon nanotube-reinforced composite triangular plates using the FSDT and element-free IMLS-Ritz method

Adaptive metamaterials by functionally graded 4D printing

The biomimetic design and 3D printing of customized mechanical properties porous Ti6Al4V scaffold for load-bearing bone reconstruction

Vibration characteristic of moderately thick functionally graded carbon nanotube reinforced composite skew plates

In this study, the possibility of using a layered silicate-reinforced polylactic acid (PLA) in additive manufacturing applications was investigated. In particular, the aim of this work was to study the influence of printing temperature in the 3D printing process of PLA/clay nanocomposites. For this reason, two PLA grades (4032D and 2003D, D-isomer content 1.5 and 4, respectively) were melt-compounded by a twin screw extruder with a layered silicate (Cloisite 30B) at 4 wt %. Then, PLA and PLA/clay feedstock filaments (diameter 1.75 mm) were produced using a single screw extruder. Dog-bone and prismatic specimens were 3D printed using the FDM technique at three different temperatures, which were progressively increased from melting temperature (185⁻200⁻215 °C for PLA 4032D and 165⁻180⁻195 °C for PLA 2003D). PLA and PLA/clay specimens were characterized using thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and tensile tests. Moreover, the morphology of the 3D printed specimens was investigated using optical microscopy and contact angle measurements. The different polymer matrix and the resulting nanocomposite morphology strongly influenced 3D printed specimen properties. DMA on PLA/clay filaments reported an increase in storage modulus both at ambient temperature and above the glass transition temperature in comparison to neat PLA filaments. Furthermore, the presence of nanoclay increased thermal stability, as demonstrated by TGA, and acted as a nucleating agent, as observed from the DSC measurements. Finally, for 3D printed samples, when increasing printing temperature, a different behavior was observed for the two PLA grades and their nanocomposites. In particular, 3D printed nanocomposite samples exhibited higher elastic modulus than neat PLA specimens, but for PLA 4032D+C30B, elastic modulus increased at increasing printing temperature while for PLA 2003D+C30B slightly decreased. Such different behavior can be explained considering the different polymer macromolecular structure and the different nanocomposite morphology (exfoliated in PLA 4032D matrix and intercalated in PLA 2003D matrix).

https://www.mdpi.com/1996-1944/11/10/1947/pdf

3D Printing of PLA/clay Nanocomposites: Influence of Printing Temperature on Printed Samples Properties.

Proposal of a new quantitative method for postural comfort evaluation

In this paper we introduce and describe a new concept in human-measurements operation that seems to be very useful for comfort evaluation: the Range of Rest Posture (RRP). Our study is focused on the identification of RRP -inside the comfort range of motion (CROM)—for the following human joints: neck, shoulder, elbow, wrist and ankle. Method used is based on a wide experimental work on 85 healthy individuals (43 males and 42 females) ranging in age from 20 to 30 year. The main target of this work is the experimental definition of CROM and identification of RRP; Experimental data has been processed by statistical methods for identifying the best statistical distribution in order to fit experimental data. Main result is the identification of RRP in CROM of main human joints involved in upper and lower limbs movements. In RRP weve found several maximum level of comfort positions in human postures: those position seems to be one of the most important information in comfort evaluation analysis. The state of the art about comfort/discomfort evaluation shows the need of an objective method to evaluate effect in the internal body and perceived effects in Moes (Contemporary ergonomics. Taylor & Francis, London, 2005) and Vink and Hallback (Appl Ergon 43:271–276, 2012) scheme of comfort perception; postural comfort is one of the aspect of comfort/discomfort perception and this paper helps to put a piece in the puzzle of posture evaluation. On the basis of papers results, a comfort evaluation method can be developed using RRP, CROM and building a composition rule that takes into account also lumbar comfort and H-point. Our work does not use ROM and CROM values coming from literature because each of these values has been experimentally identified.

Postural comfort evaluation: experimental identification of Range of Rest Posture for human articular joints

Postural Comfort Evaluation: Experimental Identification of Range of Posture for human articular joints

New trend line of research about comfort evaluation: Proposal of a framework for weighing and evaluating contributes coming from cognitive, postural and physiologic comfort perceptions

Nicola Cappetti

Papers

3D Printing of PLA/clay Nanocomposites: Influence of Printing Temperature on Printed Samples Properties.

Proposal of a new quantitative method for postural comfort evaluation

Postural comfort evaluation: experimental identification of Range of Rest Posture for human articular joints

Postural Comfort Evaluation: Experimental Identification of Range of Posture for human articular joints

New trend line of research about comfort evaluation: Proposal of a framework for weighing and evaluating contributes coming from cognitive, postural and physiologic comfort perceptions