Since the discovery of highly conducting polyacetylene by Shirakawa, MacDiarmid, and Heeger in 1977, π-conjugated systems have attracted much attention as futuristic materials for the development and production of the next generation of electronics, that is, organic electronics. Conceptually, organic electronics are quite different from conventional inorganic solid state electronics because the structural versatility of organic semiconductors allows for the incorporation of functionality by molecular design. This versatility leads to a new era in the design of electronic devices. To date, the great number of π-conjugated semiconducting materials that have either been discovered or synthesized generate an exciting library of π-conjugated systems for use in organic electronics. 11 However, some key challenges for further advancement remain: the low mobility and stability of organic semiconductors, the lack of knowledge regarding structure property relationships for understanding the fundamental chemical aspects behind the structural design, and realization of desired properties. Organic field-effect transistors (OFETs) are a kind of device consisting of an organic semiconducting layer, a gate insulator layer, and three terminals (drain, source, and gate electrodes). OFETs are not only essential building blocks for the next generation of cheap and flexible organic circuits, but they also provide an important insight into the charge transport of πconjugated systems. Therefore, they act as strong tools for the exploration of the structure property relationships of πconjugated systems, such as parameters of field-effect mobility (μ, the drift velocity of carriers under unit electric field), current on/off ratio (the ratio of the maximum on-state current to the minimum off-state current), and threshold voltage (the minimum gate voltage that is required to turn on the transistor). 17 Since the discovery of OFETs in the 1980s, they have attracted much attention. Research onOFETs includes the discovery, design, and synthesis of π-conjugated systems for OFETs, device optimization, development of applications in radio frequency identification (RFID) tags, flexible displays, electronic papers, sensors, and so forth. It is beyond the scope of this review to cover all aspects of π-conjugated systems; hence, our focus will be on the performance analysis of π-conjugated systems in OFETs. This should make it possible to extract information regarding the fundamental merit of semiconducting π-conjugated materials and capture what is needed for newmaterials and what is the synthesis orientation of newπ-conjugated systems. In fact, for a new science with many practical applications, the field of organic electronics is progressing extremely rapidly. For example, using “organic field effect transistor” or “organic field effect transistors” as the query keywords to search the Web of Science citation database, it is possible to show the distribution of papers over recent years as shown in Figure 1A. It is very clear

Semiconducting π-conjugated systems in field-effect transistors: a material odyssey of organic electronics.

Over the past 25 years, organic field-effect transistors (OFETs) have witnessed impressive improvements in materials performance by 3–4 orders of magnitude, and many of the key materials discoveries have been published in Advanced Materials. This includes some of the most recent demonstrations of organic field-effect transistors with performance that clearly exceeds that of benchmark amorphous silicon-based devices. In this article, state-of-the-art in OFETs are reviewed in light of requirements for demanding future applications, in particular active-matrix addressing for flexible organic light-emitting diode (OLED) displays. An overview is provided over both small molecule and conjugated polymer materials for which field-effect mobilities exceeding > 1 cm2 V–1 s–1 have been reported. Current understanding is also reviewed of their charge transport physics that allows reaching such unexpectedly high mobilities in these weakly van der Waals bonded and structurally comparatively disordered materials with a view towards understanding the potential for further improvement in performance in the future.

/pdf/25th-anniversary-article-organic-field-effect-transistors-56cmlfirhg.pdf

25th anniversary article: organic field-effect transistors: the path beyond amorphous silicon.

Organic (opto)electronic materials have received considerable attention due to their applications in thin-film-transistors, light-emitting diodes, solar cells, sensors, photorefractive devices, and many others. The technological promises include low cost of these materials and the possibility of their room-temperature deposition from solution on large-area and/or flexible substrates. The article reviews the current understanding of the physical mechanisms that determine the (opto)electronic properties of high-performance organic materials. The focus of the review is on photoinduced processes and on electronic properties important for optoelectronic applications relying on charge carrier photogeneration. Additionally, it highlights the capabilities of various experimental techniques for characterization of these materials, summarizes top-of-the-line device performance, and outlines recent trends in the further development of the field. The properties of materials based both on small molecules and on conjug...

Organic Optoelectronic Materials: Mechanisms and Applications

Recently, 'Liquid crystal display (LCD) vs. organic light-emitting diode (OLED) display: who wins?' has become a topic of heated debate. In this review, we perform a systematic and comparative study of these two flat panel display technologies. First, we review recent advances in LCDs and OLEDs, including material development, device configuration and system integration. Next we analyze and compare their performances by six key display metrics: response time, contrast ratio, color gamut, lifetime, power efficiency, and panel flexibility. In this section, we focus on two key parameters: motion picture response time (MPRT) and ambient contrast ratio (ACR), which dramatically affect image quality in practical application scenarios. MPRT determines the image blur of a moving picture, and ACR governs the perceived image contrast under ambient lighting conditions. It is intriguing that LCD can achieve comparable or even slightly better MPRT and ACR than OLED, although its response time and contrast ratio are generally perceived to be much inferior to those of OLED. Finally, three future trends are highlighted, including high dynamic range, virtual reality/augmented reality and smart displays with versatile functions.

/pdf/liquid-crystal-display-and-organic-light-emitting-diode-5b9d3ky1k3.pdf

Liquid crystal display and organic light-emitting diode display: present status and future perspectives

Organic thin-film transistors (OTFTs) offer unprecedented opportunities for implementation in a broad range of technological applications spanning from large-volume microelectronics and optical displays to chemical and biological sensors. In this Progress Report, we review the application of organic transistors in the fields of flexible optical displays and microelectronics. The advantages associated with the use of OTFT technology are discussed with primary emphasis on the latest developments in the area of active-matrix electrophoretic and organic light-emitting diode displays based on OTFT backplanes and on the application of organic transistors in microelectronics including digital and analog circuits.

Organic transistors in optical displays and microelectronic applications

Hopping and band mobilities of holes in organic semiconductors at room temperature were estimated from first principle calculations. Relaxation times of charge carriers were evaluated using the acoustic deformation potential model. It is found that van der Waals interactions play an important role in determining accurate relaxation times. The hopping mobilities of pentacene, rubrene, and 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) in bulk single crystalline structures were found to be smaller than 4 cm2/Vs, whereas the band mobilities were estimated between 36 and 58 cm2/Vs, which are close to the maximum reported experimental values. This strongly suggests that band conductivity is dominant in these materials even at room temperature.

Hopping and band mobilities of pentacene, rubrene, and 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) from first principle calculations

— An 80-μm-thick rollable AMOLED display driven by an OTFT is reported. The display was developed so as to be rollable in one direction with an integrated OTFT gate driver circuit. It was successfully operated by an originally developed organic semiconductor, a peri-xanthenoxanthene derivative. The display retained its initial electrical properties and picture quality even after being subjected to 1000 cycles of a roll-up-and-release test with a radius of 4 mm.

An OTFT-driven rollable OLED display

We have synthesized and characterized stable organic semiconductors, 3,9-diphenyl-peri-xanthenoxanthene (Ph-PXX) and its soluble derivative for organic thin-film transistors (OTFTs). A π-system is stabilized against oxidation by introduction of heteroatoms into the reactive sites in the π-system. This strategy for stabilization does not suffer from the conventional tradeoff between environmental stability and efficient carrier injection, which appears when OSCs with deeper highest occupied molecular orbitals (HOMOs) are applied. UV−vis spectra of an air-saturated solution of Ph-PXX were unchanged over 120 h, indicating that it has an environmental stability. A HOMO level of Ph-PXX molecule was estimated to be only 5.1 eV below vacuum level, achieving efficient carrier injection. In fact, OTFTs with Ph-PXX showed high apparent mobility over 0.4 cm2/(V s) without demonstrating nonlinear behavior of source-drain ohmic contacts and have been shown to be stable for 5 months under ambient conditions. In additio...

Stable peri-Xanthenoxanthene Thin-Film Transistors with Efficient Carrier Injection

We have developed an 80-μm-thick rollable AM-OLED display. The display is driven by an organic TFT backplane for which we have used originally developed semiconductor, a perixanthenoxanthene derivative. The display shows no degradation in a 4 mm-radius roll-up-and-release cycle of 1000 times.

47.3: A Rollable AM‐OLED Display Driven by OTFTs

We have developed a 4.1-in FWQVGA rollable AM-OLED display driven by organic TFTs. For an organic semiconductor, a peri-Xanthenoxanthene derivative has been developed. We have also developed an integrated gate-driver circuit. This enables to eliminate rigid gate-driver ICs and roll up the OLED display with bending radius of 4 mm.

Norihito Kobayashi

Papers

Hopping and band mobilities of pentacene, rubrene, and 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) from first principle calculations

An OTFT-driven rollable OLED display

Stable peri-Xanthenoxanthene Thin-Film Transistors with Efficient Carrier Injection

47.3: A Rollable AM‐OLED Display Driven by OTFTs

36.1: Invited Paper: Rollable OLED Display Driven by Organic TFTs