Sustainability, industrial ecology, eco-efficiency, and green chemistry are directing the development of the next generation of materials, products, and processes. Biodegradable plastics and biocompatible composites generated from renewable biomass feedstock are regarded as promising materials that could replace synthetic polymers and reduce global dependence on fossil fuel sources.1 It is estimated that the world is currently consuming petroleum at a rate 100 000 times faster than nature can replace it.2 The growing global environmental awareness and societal concern, high rate of depletion of petroleum resources, concepts of sustainability, and new environmental regulations have triggered the search for new products and processes that are more compatible with the environment. The most abundant natural polymer in our environment is cellulose. It has an estimated annual biosphere production of 90 × 109 metric tons and, consequently, represents the most obvious renewable resource for producing biocomposites.3 Its highly ordered structure is responsible for its desirable mechanical properties but makes it a challenge to find suitable solvents for its dissolution.4 The first attempts to dissolve cellulose date back to the early 1920s.5 Several aqueous and nonaqueous cellulose solvents have been discovered since then, but all of these solvents suffer either from high environmental toxicity or from insufficient solvation power.6 In general, the traditional cellulose dissolution processes require relatively harsh conditions and the use of expensive and uncommon solvents, which usually cannot be recovered after the process.6-10 However, a new class of solvents was opened to the cellulose research community, when in 2002 Swatloski et al. reported the use of an ionic liquid as solvent for cellulose both for the regeneration of cellulose and for the chemical modification of the polysaccharide.7 In 1934, Graenacher had discovered a solvent system with the ability to dissolve cellulose, but this was thought to be of little practical value at the time.11,12 Ionic liquids are a group of salts that exist as liquids at relatively low temperatures (<100 °C). They have many attractive properties, including chemical and thermal stability, nonflammability, and immeasurably low vapor pressure.12 First discovered in 1914 by Walden, their huge potential in industry and research was only realized within the last few decades.13,14 This review aims to provide a summary of our current state of knowledge on the structural features of wood * To whom correspondence should be addressed. E-mail: ken.marsh@ canterbury.ac.nz. Tel.: +64 3364 2140. Fax: +64 3364 2063. † Department of Chemical and Process Engineering. ‡ Department of Mechanical Engineering. Andre Pinkert was born in Schwabach, Germany, in 1981. He studied Chemistry at the University of Erlangen-Nurnberg, Germany, and received his prediploma and diploma degrees in 2004 and 2008, respectively. During 2005, he joined the Marine Natural Products Group, lead by Murray H. Munro and John W. Blunt, at the University of Canterbury (UoC), New Zealand, working on the isolation and characterization of bioactive metabolites. In early 2006, he returned to Germany and resumed his studies at the University of Erlangen-Nurnberg, finishing his degree under the supervision of Rudi van Eldik. Associated with his studies, during 2007, he worked for AREVA NP on radio-nuclear chemistry and computer modeling. Since 2008, he is studying towards a Ph.D. degree at UoC under the supervision of Shusheng Pang, Ken Marsh, and Mark Staiger. His research focuses on biocomposites from natural fibers, processed via ionic liquids. Chem. Rev. 2009, 109, 6712–6728 6712

Ionic Liquids and Their Interaction with Cellulose

Until recently, “room-temperature” (<100–150 °C) liquid-state electrochemistry was mostly electrochemistry of diluted electrolytes(1)–(4) where dissolved salt ions were surrounded by a considerable amount of solvent molecules. Highly concentrated liquid electrolytes were mostly considered in the narrow (albeit important) niche of high-temperature electrochemistry of molten inorganic salts(5-9) and in the even narrower niche of “first-generation” room temperature ionic liquids, RTILs (such as chloro-aluminates and alkylammonium nitrates).(10-14) The situation has changed dramatically in the 2000s after the discovery of new moisture- and temperature-stable RTILs.(15, 16) These days, the “later generation” RTILs attracted wide attention within the electrochemical community.(17-31) Indeed, RTILs, as a class of compounds, possess a unique combination of properties (high charge density, electrochemical stability, low/negligible volatility, tunable polarity, etc.) that make them very attractive substances from fundamental and application points of view.(32-38) Most importantly, they can mix with each other in “cocktails” of one’s choice to acquire the desired properties (e.g., wider temperature range of the liquid phase(39, 40)) and can serve as almost “universal” solvents.(37, 41, 42) It is worth noting here one of the advantages of RTILs as compared to their high-temperature molten salt (HTMS)(43) “sister-systems”.(44) In RTILs the dissolved molecules are not imbedded in a harsh high temperature environment which could be destructive for many classes of fragile (organic) molecules.

/pdf/ionic-liquids-at-electrified-interfaces-4n93eaytys.pdf

Ionic Liquids at Electrified Interfaces

A review. Physicochem. properties of ionic liqs. are discussed. Chem. and electrochem. reactivity in ionic liqs. is described including electrode reactions, electrode reaction kinetics, electrosynthesis, etc.

Electrochemical reactivity in room-temperature ionic liquids.

Density and viscosity of several pure and water-saturated ionic liquids

Ionic Liquids-Based Extraction: A Promising Strategy for theAdvanced Nuclear Fuel Cycle Xiaoqi Sun, Huimin Luo, and Sheng Dai* Chemical Sciences Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831, United States Energy and Transportation Science Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831, United States Department of Chemistry, University of Tennessee, Knoxville, Tennessee 37916, United States State Key Laboratory of Rare Earth Resource Utilization, Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, P. R. China

O.O. Okoturo

Papers

Temperature dependence of viscosity for room temperature ionic liquids