Optimized use of alum together with unmodified Cassia obtusifolia seed gum as a coagulant aid in treatment of palm oil mill effluent under natural pH of wastewater

The main objective of this work was to improve the performance of biodiesel–methanol blends in a VCR engine by using optimized engine parameters. For optimization of the engine, operational parameters such as compression ratio, fuel blend, and load are taken as factors, whereas performance parameters such as brake thermal efficiency (Bth) and brake specific fuel consumption (Bsfc) and emission parameters such as carbon monoxide (CO), unburnt hydrocarbons (HC), Nitric oxides (NOx) and smoke are taken as responses. Experimentation is carried out as per the design of experiments of the response surface methodology. Optimization of engine operational parameters is carried out using Derringers Desirability approach. From the results obtained it is inferred that the VCR engine has maximum performance and minimum emissions at 18 compression ratio, 5% fuel blend and at 9.03 kg of load. At this optimized operating conditions of the engine the responses such as brake thermal efficiency, brake specific fuel consumption, carbon monoxide, unburnt hydrocarbons, nitric oxide, and smoke are found to be 31.95%, 0.37 kg/kW h, 0.036%, 5 ppm, 531.23 ppm and 15.35% respectively. It is finally observed from the mathematical models and experimental data that biodiesel methanol blends have maximum efficiency and minimum emissions at optimized engine parameters.

Improvement of biodiesel methanol blends performance in a variable compression ratio engine using response surface methodology

Optimization of performance and emission characteristics of CI engine fueled with Jatropha biodiesel produced using a heterogeneous catalyst (CaO)

Investigation on performance and emission characteristics of a variable compression multi fuel engine fuelled with Karanja biodiesel–diesel blend

Effect of compression ratio on combustion, performance, and emission characteristics of compression ignition engine fueled with palm (B20) biodiesel blend

This work investigates the influence of compression ratio on the performance and emissions of a diesel engine using biodiesel (10, 20, 30, and 50 %) blended-diesel fuel. Test was carried out using four different compression ratios (17.5, 17.7, 17.9 and 18.1). The experiments were designed using a statistical tool known as design of experiments based on response surface methodology. The resultant models of the response surface methodology were helpful to predict the response parameters such as brake specific fuel consumption, brake thermal efficiency, carbon monoxide, hydrocarbon and nitrogen oxides. The results showed that best results for brake thermal efficiency and brake specific fuel consumption were observed at increased compression ratio. For all test fuels, an increase in compression ratio leads to decrease in the carbon monoxide and hydrocarbon emissions while nitrogen oxide emissions increase. Optimization of parameters was performed using the desirability approach of the response surface methodology for better performance and lower emission. A compression ratio 17.9, 10 % of fuel blend and 3.81 kW of power could be considered as the optimum parameters for the test engine.

/pdf/optimization-of-operational-parameters-on-performance-and-2tz69uodp0.pdf

P. Ravikumar

Papers

Optimization of operational parameters on performance and emissions of a diesel engine using biodiesel