Control of smoke flow in tunnel fires

An in situ process for treating an oil containing formation is provided. The process may include providing heat from one or more heaters to at least a portion of the formation. The heat may be allowed to transfer from the one or more heaters to a part of the formation such that heat from the one or more heat sources pyrolyzes at least some hydrocarbons within the part. Hydrocarbons may be produced from the formation.

In situ thermal processing of an oil reservoir formation

In an embodiment, a method of treating a kerogen and liquid hydrocarbon containing formation in situ may include providing heat from one or more heat sources to at least a portion of the formation. Heat may be allowed to transfer from the one or more heat sources to a part of the formation. In some embodiments, at least a portion of liquid hydrocarbons in the part may be mobilized. At least a portion of kerogen in the part may be pyrolyzed. In certain embodiments, a pressure within at least a part of the formation may be controlled. The pressure may be controlled to be at least about 2.0 bars absolute. A mixture may be produced from the formation.

In situ recovery from a kerogen and liquid hydrocarbon containing formation

A process may include providing heat from one or more heaters to at least a portion of a subsurface formation. Heat may transfer from one or more heaters to a part of a formation. In some embodiments, heat from the one or more heat sources may pyrolyze at least some hydrocarbons in a part of a subsurface formation. Hydrocarbons and/or other products may be produced from a subsurface formation. Certain embodiments describe apparatus, methods, and/or processes used in treating a subsurface or hydrocarbon containing formation.

Thermal processes for subsurface formations

A oil shale formation may be treated using an in situ thermal process. A mixture of hydrocarbons, H 2 , and/or other formation fluids may be produced from the formation. Heat may be applied to the formation to raise a temperature of a portion of the formation to a pyrolysis temperature. Heat sources may be used to heat the formation. The heat sources may be positioned within the formation in a selected pattern.

In situ thermal processing of an oil shale formation using a pattern of heat sources

Measurements of the times of flight of sound waves can be used to determine temperature in a gas contained in a long tube which confines sound waves Sound pulses are transmitted and received by a suitable loud speaker attached to one end of the long tube A number of stubs or other discontinuities produce the sound reflections whose times of arrival are measured The time intervals yield average sound speeds in each interval between any two stubs from which temperatures are calculated Corrections for thermal expansion of the tube are easily made

System for temperature profile measurement in large furnances and kilns and method therefor

The water vapor content for air in drier ducts, ovens, furnaces and the like is determined by a measurement of sound speed which is done by measuring the time difference between sound pulses reflected by two reflectors spaced a known distance apart in a guide tube. The transmitter-receiver is located at one end of the tube. The tube has enough number of holes to allow the hot moist air to get into the probe tube. A non-porous tube containing dry air placed in the same duct provides a similar measurement of dry-sound speed. The ratio of the two speeds of sound or the two measured time intervals is a simple function of the water vapor content practically independent of temperature thereby providing a very accurate measurement of water vapor content over an extremely wide range of temperatures. The sensor is accurate, immune to harsh environments, has an extremely low time constant, has absolutely no hysteresis and needs no calibration.

Acoustic humidity sensor

An accurate measurement of liquid levels in a tank are made using a dual tube sonic level gage. This uses plane waves of sound, in air, propagated in two vertical tubular wave guides to locate the levels of liquid contained in each tube. One tube has slots at the bottom and allows both the light (upper) and the heavy (lower) liquids to be present inside the tube at the same level as outside (i.e. in the tank). The other tube allows only the lower liquid to enter it. In the application for a measurement of gasoline and water levels in a tank, levels outside the tube (i.e. in the tank) are calculated using the equations of hydrostatics. Corrections due to temperature need not be made in order to obtain levels accurate to 1 percent.

Dual tube sonic level gage

Density measurements can be made in a gas contained in a flow through enclosure by measuring the sound pressure level at a receiver or microphone located near a dipole sound source which is driven at constant velocity amplitude at low frequencies. Analytical results, which are provided in terms of geometrical parameters, wave numbers and sound source type for systems of this invention, agree well with published data. The relatively simple designs feature a transmitter transducer at the closed end of a small tube and a receiver transducer on the circumference of the small tube located a small distance away from the transmitter. The transmitter should be a dipole operated at low frequency with the kL value preferably less than about 0.3.

/pdf/acoustic-device-and-method-for-measuring-gas-densities-ozabjfn6rq.pdf

Acoustic device and method for measuring gas densities

Measurement of times of flight of sound waves can be used to determine temperatures in a gas. This paper describes a system, based on this principle, that is capable of giving the temperature profile in a nonisothermal gas volume, for example, prevalent in a large furnace. The apparatus is simple, rugged, accurate, and capable of being automated for process control applications. It is basically an acoustic waveguide where the outside temperature profile is transferred to a chosen gas contained inside the guide.

P. Shakkottai

Papers

System for temperature profile measurement in large furnances and kilns and method therefor

Acoustic humidity sensor

Dual tube sonic level gage

Acoustic device and method for measuring gas densities

Acoustic temperature profile measurement technique for large combustion chambers