A modified preamble is used by extended devices that operate at higher rates, MIMO or other extensions relative to strict 802.11a-compliant devices. The extended devices might use multiple antenna techniques (MIMO), where multiple data streams are multiplexed spatially and/or multi-channel techniques, where an extended transmitter transmits using more than one 802.11a channel at a time. Such extensions to IEEE 802.11a can exist in extended devices. The modified preamble is usable for signaling, to legacy devices as well as extended devices, to indicate capabilities and to cause legacy devices or extended devices to defer to other devices such that the common communication channel is not subject to unnecessary interference. The modified preamble is also usable for obtaining MIMO channel estimates and/or multi-channel estimates. The modified preamble preferably includes properties that facilitate detection of conventional and/or extended modes (“mode detection”) and provides some level of coexistence with legacy IEEE 802.11a devices.

Modified preamble structure for ieee 802.11a extensions to allow for coexistence and interoperability between 802.11a devices and higher data rate, mimo or otherwise extended devices

A PHY entity for a UWB system utilizes the unlicensed 3.1-10.6 GHZ UWB band, as regulated in the United States by the Code of Federal Regulation, Title 47, Section 15. The UWB system provides a wireless pico area network (PAN) with data payload communication capabilities of 55, 80, 110, 160, 200, 320 and 480 Mb/s. The UWB system employs orthogonal frequency division multiplexing (OFDM) and uses a total of 122 sub-carriers that are modulated using quadrature phase shift keying (QPSK). Forward error correction coding (convolutional coding) is used with a coding rate of {fraction (11/32)}, ½, ⅝ and ¾.

Time-frequency interleaved orthogonal frequency division multiplexing ultra wide band physical layer

A wireless communication apparatus that includes a first format detecting unit detecting a format by executing signal processing on a preamble of a received packet before decoding, an estimating unit using the preamble to carry out multiple types of estimations, and a decoding unit decoding the received packet in accordance with the detected format based on the estimations. The apparatus further includes a second format detecting unit detecting the format of the received packet based on decoded control information in the preamble of the received packet, an error detection determination unit, when the format detected by the first format detecting unit differs from the format detected by the second format detecting unit, determining that the format detected by the first format detecting unit is an error, and a control unit controlling operations of the estimating unit and the decoding unit based on a determined result.

Wireless communication apparatus, wireless communication method, and computer program

A packet detector joint detects 802.11a packets, 802.11b packets and interference that is within a monitored frequency range but is not formatted as 802.11a packets or 802.11b packets. The packet detector can use signals from one or more antennas. Detection of signals is done using differentially detected correlations. In addition to packet detection, the packet detector can identify signal levels, noise levels and locations of narrowband interference. The process of packet detection and identifying other indicators can be done simultaneously and as the signal is being received.

Joint packet detection in a wireless communication system with one or more receiver

Systems and methods are provided for processing a payload portion of a received signal in a single carrier mode or a multiple carrier mode based on a portion of the received signal. A single carrier signaling portion is received at a first rate, and whether the payload portion of the signal is a single carrier signal or a multiple carrier signal is detected from the received single carrier signaling portion. The payload portion of the received signal is received at the first rate and demodulated in a single carrier mode if the detecting determines that the payload portion of the received signal is a single carrier signal, and the payload portion of the received signal is demodulated in a multiple carrier mode if the detecting determines that the payload portion of the received signal is a multiple carrier signal.

Physical Layer Frame Format Design for Wideband Wireless Communications Systems

A wireless receiver that sorts packets including a packet detector, multiple correlators, and multiple packet processors. Each correlator correlates a received signal according to packet type. Each packet processor processes the received signal according to packet type. A signal power detector may be provided to initially qualify the received signal as containing a packet, and the correlators determine whether a packet is present. The correlators may be configured for sequential or simultaneous correlation. For the simultaneous correlator configuration, a correlation monitor is provided to monitor correlation results to determine if the received signal contains a packet, and if so, to determine packet type. A low SNR packet detector may be provided which correlates the received signal to detect weak packet signals. The signal power detector may be omitted, where the correlators simultaneously monitor the received signal while a correlation monitor continuously monitors correlation results for packet detection.

Wireless Receiver For Sorting Packets

A wireless receiver (100) that sorts packets including a packet detector (105, 203), multiple correlators (107, 111), and multiple packet processors (109, 113). Each correlator correlates a received signal according to packet type. Each packet processor processes the received signal according to packet type. A signal power detector (105) may be provided to initially qualify the received signal as containing a packet, and the correlators determine whether a packet is present. The correlators may be configured for sequential or simultaneous correlation. For the simultaneous correlator configuration, a correlation monitor (203) is provided to monitor correlation results to determine if the received signal contains a packet, and if so, to determine packet type. A low SNR packet detector may be provided which correlates the received signal to detect weak packet signals. The signal power detector (105) may be omitted, and the correlators may simultaneously monitor the received signal while a correlation monitor may continuously monitor correlation results for packet detection.

Perry W. Frogge

Papers

Wireless Receiver For Sorting Packets

Wireless receiver for sorting packets using correlators