In a previous communication, we reported a new method of synthesis of stable metallic copper nanoparticles (Cu-NPs), which had high potency for bacterial cell filamentation and cell killing. The present study deals with the mechanism of filament formation and antibacterial roles of Cu-NPs in E. coli cells. Our results demonstrate that NP-mediated dissipation of cell membrane potential was the probable reason for the formation of cell filaments. On the other hand, Cu-NPs were found to cause multiple toxic effects such as generation of reactive oxygen species, lipid peroxidation, protein oxidation and DNA degradation in E. coli cells. In vitro interaction between plasmid pUC19 DNA and Cu-NPs showed that the degradation of DNA was highly inhibited in the presence of the divalent metal ion chelator EDTA, which indicated a positive role of Cu(2+) ions in the degradation process. Moreover, the fast destabilization, i.e. the reduction in size, of NPs in the presence of EDTA led us to propose that the nascent Cu ions liberated from the NP surface were responsible for higher reactivity of the Cu-NPs than the equivalent amount of its precursor CuCl2; the nascent ions were generated from the oxidation of metallic NPs when they were in the vicinity of agents, namely cells, biomolecules or medium components, to be reduced simultaneously.

https://iopscience.iop.org/article/10.1088/0957-4484/25/13/135101/pdf

Mechanism of antibacterial activity of copper nanoparticles.

Noble metals in medicine: Latest advances

Intracellular delivery is a key step in biological research and has enabled decades of biomedical discoveries. It is also becoming increasingly important in industrial and medical applications ranging from biomanufacture to cell-based therapies. Here, we review techniques for membrane disruption-based intracellular delivery from 1911 until the present. These methods achieve rapid, direct, and universal delivery of almost any cargo molecule or material that can be dispersed in solution. We start by covering the motivations for intracellular delivery and the challenges associated with the different cargo types—small molecules, proteins/peptides, nucleic acids, synthetic nanomaterials, and large cargo. The review then presents a broad comparison of delivery strategies followed by an analysis of membrane disruption mechanisms and the biology of the cell response. We cover mechanical, electrical, thermal, optical, and chemical strategies of membrane disruption with a particular emphasis on their applications a...

/pdf/intracellular-delivery-by-membrane-disruption-mechanisms-1r7lisc9lz.pdf

Intracellular Delivery by Membrane Disruption: Mechanisms, Strategies, and Concepts.

Nanotechnology is an emerging branch of science, which has potential to solve many problems in different fields. The union of nanotechnology with other fields of sciences including physics, chemistry, and biology has brought the concept of synthesis of nanoparticles from their respective metals. Till date, many types of nanoparticles have been synthesized and being used in different fields for various applications. Moreover, copper nanoparticles attract biologists because of their significant and broad-spectrum bioactivity. Due to the large surface area to volume ratio, copper nanoparticles have been used as potential antimicrobial agent in many biomedical applications. But the excess use of any metal nanoparticles increase the chance of toxicity to humans, other living beings, and environment. In this article, we have critically reviewed the bioactivities and cytotoxicity of copper nanoparticles. We have also focused on possible mechanism involved in its interaction with microbes.

Bioactivity, mechanism of action, and cytotoxicity of copper-based nanoparticles: A review

Copper nanoparticle synthesis has been gaining attention due to its availability. However, factors such as agglomeration and rapid oxidation have made it a difficult research area. In the present work, pure copper nanoparticles were prepared in the presence of a chitosan stabilizer through chemical means. The purity of the nanoparticles was authenticated using different characterization techniques, including ultraviolet visible spectroscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and field emission scanning electron microscopy. The antibacterial as well as antifungal activity of the nanoparticles were investigated using several microorganisms of interest, including methicillin-resistant Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Salmonella choleraesuis, and Candida albicans. The effect of a chitosan medium on growth of the microorganism was studied, and this was found to influence growth rate. The size of the copper nanoparticles obtained was in the range of 2-350 nm, depending on the concentration of the chitosan stabilizer.

/pdf/synthesis-characterization-and-antimicrobial-properties-of-4x8vigwfik.pdf

Synthesis, characterization, and antimicrobial properties of copper nanoparticles.

A method for preparation of copper nanoparticles (Cu-NPs) was developed by simple reduction of CuCl2 in the presence of gelatin as a stabilizer and without applying stringent conditions like purging with nitrogen. The NPs were characterized by spectrophotometry, dynamic light scattering, x-ray diffraction, transmission electron microscopy, atomic force microscopy and x-ray photoelectron spectroscopy. The particles were about 50-60 nm in size and highly stable. The antibacterial activity of this Cu-NP on Gram-negative Escherichia coli was demonstrated by the methods of agar plating, flow cytometry and phase contrast microscopy. The minimum inhibitory concentration (3.0 µg ml(-1)), minimum bactericidal concentration (7.5 µg ml(-1)) and susceptibility constant (0.92) showed that this Cu-NP is highly effective against E. coli at a much lower concentration than that reported previously. Treatment with Cu-NPs made E. coli cells filamentous. The higher the concentration of Cu-NPs, the greater the population of filamentous cells; average filament size varied from 7 to 20 µm compared to the normal cell size of ∼2.5 µm. Both filamentation and killing of cells by Cu-NPs (7.5 µg ml(-1)) also occurred in an E. coli strain resistant to multiple antibiotics. Moreover, an antibacterial effect of Cu-NPs was also observed in Gram-positive Bacillus subtilis and Staphylococcus aureus, for which the values of minimum inhibitory concentration and minimum bactericidal concentration were close to that for E. coli.

https://iopscience.iop.org/article/10.1088/0957-4484/23/8/085103/pdf

A simple robust method for synthesis of metallic copper nanoparticles of high antibacterial potency against E. coli.

Artificial transformation of Escherichia coli with plasmid DNA in presence of CaCl2 is a widely used technique in recombinant DNA technology. However, exact mechanism of DNA transfer across cell membranes is largely obscure. In this study, measurements of both steady state and time-resolved anisotropies of fluorescent dye trimethyl ammonium diphenyl hexatriene (TMA-DPH), bound to cellular outer membrane, indicated heat-pulse (0 degrees C42 degrees C) step of the standard transformation procedure had lowered considerably outer membrane fluidity of cells. The decrease in fluidity was caused by release of lipids from cell surface to extra-cellular medium. A subsequent cold-shock (42 degrees C0 degrees C) to the cells raised the fluidity further to its original value and this was caused by release of membrane proteins to extra-cellular medium. When the cycle of heat-pulse and cold-shock steps was repeated, more release of lipids and proteins respectively had taken place, which ultimately enhanced transformation efficiency gradually up to third cycle. Study of competent cell surface by atomic force microscope showed release of lipids had formed pores on cell surface. Moreover, the heat-pulse step almost depolarized cellular inner membrane. In this communication, we propose heat-pulse step had two important roles on DNA entry: (a) Release of lipids and consequent formation of pores on cell surface, which helped DNA to cross outer membrane barrier, and (b) lowering of membrane potential, which facilitated DNA to cross inner membrane of E. coli.

https://www.tandfonline.com/doi/pdf/10.1080/09687680802187765

How does plasmid DNA penetrate cell membranes in artificial transformation process of Escherichia coli

Plasmid DNA Binds to the Core Oligosaccharide Domain of LPS Molecules of E. coli Cell Surface in the CaCl2-Mediated Transformation Process

In the standard method of transformation of Escherichia coli with extraneous DNA, cells are made competent for DNA uptake by incubating in ice-cold 100 mM CaCl(2). Analysis of the whole protein profile of CaCl(2)-treated E. coli cells by the techniques of one- and two-dimensional gel electrophoresis, MALDI-MS and immunoprecipitation revealed overproduction of outer membrane proteins OmpC, OmpA and heat-shock protein GroEL. In parity, transformation efficiency of E. coli ompC mutant by plasmid pUC19 DNA was found to be about 40 % lower than that of the wild type strain. Moreover, in E. coli cells containing groEL-bearing plasmid, induction of GroEL caused simultaneous overproduction of OmpC. On the other hand, less OmpC was synthesized in E. coli groEL mutant compared to its wild type counterpart, by CaCl(2)-shock. From these results it can be suggested that in the process of CaCl(2)-mediated generation of competence, the heat-shock chaperone GroEL has specific role in DNA entry into the cell, possibly through the overproduced OmpC and OmpA porins.

Calcium Chloride Made E. coli Competent for Uptake of Extraneous DNA Through Overproduction of OmpC Protein

With increasing addition of Escherichia coli LPS to calf thymus DNA, both dissolved in CaCl2, absorption maxima of DNA at 260 nm decreased gradually with the appearance of isosbastic points at both ends of spectra, which implied some binding between DNA and LPS. Hill plot of absorbance data showed that the binding interaction was positive cooperative in nature. For any fixed concentration of DNA and LPS, extent of interaction increased as concentration of CaCl2 was raised from 1.0 to 100 mM, signifying the electrostatic nature of the interaction, mediated through Ca2+ ion. Stepwise addition of EDTA, a chelating agent for divalent cations, to DNA-LPS bound complex gradually reversed the spectral shift with increase in absorbance at 260 nm, which implied opening up of the complex, that is, reversible nature of the interaction. Circular dichroism spectral changes of DNA by the addition of LPS indicated partial transition of DNA from B to A form. Isothermal titration calorimetric (ITC) study showed that the DNA-LPS binding was an exothermic and enthalpy-driven phenomenon. Moreover, in the presence of 100 mM CaCl2, binding constant of the interaction was found to be 2.6 x 10(4) M(-1) and 3.1 x 10(4) M(-1) from the analysis of Hill plot and ITC result, respectively. DNA-melting study showed that the LPS binding had increased the melting temperature of DNA, indicating more stabilization of DNA double helix. The binding of LPS to DNA made the complex resistant to digestion with endonucleases EcoRI and DNase I.

Pulakesh Aich

Papers

A simple robust method for synthesis of metallic copper nanoparticles of high antibacterial potency against E. coli.

How does plasmid DNA penetrate cell membranes in artificial transformation process of Escherichia coli

Plasmid DNA Binds to the Core Oligosaccharide Domain of LPS Molecules of E. coli Cell Surface in the CaCl2-Mediated Transformation Process

Calcium Chloride Made E. coli Competent for Uptake of Extraneous DNA Through Overproduction of OmpC Protein

In vitro interaction between calf thymus DNA and Escherichia coli LPS in the presence of divalent cation Ca2