There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

This paper presents a review of control strategies, stability analysis, and stabilization techniques for dc microgrids (MGs). Overall control is systematically classified into local and coordinated control levels according to respective functionalities in each level. As opposed to local control, which relies only on local measurements, some line of communication between units needs to be made available in order to achieve the coordinated control. Depending on the communication method, three basic coordinated control strategies can be distinguished, i.e., decentralized, centralized, and distributed control. Decentralized control can be regarded as an extension of the local control since it is also based exclusively on local measurements. In contrast, centralized and distributed control strategies rely on digital communication technologies. A number of approaches using these three coordinated control strategies to achieve various control objectives are reviewed in this paper. Moreover, properties of dc MG dynamics and stability are discussed. This paper illustrates that tightly regulated point-of-load converters tend to reduce the stability margins of the system since they introduce negative impedances, which can potentially oscillate with lightly damped power supply input filters. It is also demonstrated that how the stability of the whole system is defined by the relationship of the source and load impedances, referred to as the minor loop gain. Several prominent specifications for the minor loop gain are reviewed. Finally, a number of active stabilization techniques are presented.

/pdf/dc-microgrids-part-i-a-review-of-control-strategies-and-3oi6nfb2fy.pdf

DC Microgrids—Part I: A Review of Control Strategies and Stabilization Techniques

DC microgrids (MGs) have been gaining a continually increasing interest over the past couple of years both in academia and industry. The advantages of dc distribution when compared to its ac counterpart are well known. The most important ones include higher reliability and efficiency, simpler control and natural interface with renewable energy sources, and electronic loads and energy storage systems. With rapid emergence of these components in modern power systems, the importance of dc in today's society is gradually being brought to a whole new level. A broad class of traditional dc distribution applications, such as traction, telecom, vehicular, and distributed power systems can be classified under dc MG framework and ongoing development, and expansion of the field is largely influenced by concepts used over there. This paper aims first to shed light on the practical design aspects of dc MG technology concerning typical power hardware topologies and their suitability for different emerging smart grid applications. Then, an overview of the state of the art in dc MG protection and grounding is provided. Owing to the fact that there is no zero-current crossing, an arc that appears upon breaking dc current cannot be extinguished naturally, making the protection of dc MGs a challenging problem. In relation with this, a comprehensive overview of protection schemes, which discusses both design of practical protective devices and their integration into overall protection systems, is provided. Closely coupled with protection, conflicting grounding objectives, e.g., minimization of stray current and common-mode voltage, are explained and several practical solutions are presented. Also, standardization efforts for dc systems are addressed. Finally, concluding remarks and important future research directions are pointed out.

/pdf/dc-microgrids-part-ii-a-review-of-power-architectures-69j8nn2rpd.pdf

DC Microgrids—Part II: A Review of Power Architectures, Applications, and Standardization Issues

Historically, centrally computed algorithms have been the primary means of power system optimization and control. With increasing penetrations of distributed energy resources requiring optimization and control of power systems with many controllable devices, distributed algorithms have been the subject of significant research interest. This paper surveys the literature of distributed algorithms with applications to optimization and control of power systems. In particular, this paper reviews distributed algorithms for offline solution of optimal power flow (OPF) problems as well as online algorithms for real-time solution of OPF, optimal frequency control, optimal voltage control, and optimal wide-area control problems.

https://ieeexplore.ieee.org/ielaam/5165411/8075182/7990560-aam.pdf

A Survey of Distributed Optimization and Control Algorithms for Electric Power Systems

In recent researches on inverter-based distributed generators, disadvantages of traditional grid-connected current control, such as no grid-forming ability and lack of inertia, have been pointed out. As a result, novel control methods like droop control and virtual synchronous generator (VSG) have been proposed. In both methods, droop characteristics are used to control active and reactive power, and the only difference between them is that VSG has virtual inertia with the emulation of swing equation, whereas droop control has no inertia. In this paper, dynamic characteristics of both control methods are studied, in both stand-alone mode and synchronous-generator-connected mode, to understand the differences caused by swing equation. Small-signal models are built to compare transient responses of frequency during a small loading transition, and state-space models are built to analyze oscillation of output active power. Effects of delays in both controls are also studied, and an inertial droop control method is proposed based on the comparison. The results are verified by simulations and experiments. It is suggested that VSG control and proposed inertial droop control inherits the advantages of droop control, and in addition, provides inertia support for the system.

Comparison of Dynamic Characteristics Between Virtual Synchronous Generator and Droop Control in Inverter-Based Distributed Generators

The fully-distributed secondary control can be regarded as a viable solution to achieve acceptable voltage regulation and proper load-sharing of DC microgrids. Using this secondary controller, in addition to acceptable voltage regulation, the load is shared according to the nominal capacity of the distributed generation units. This manner is traditionally implemented as a time-triggered communication paradigm which causes a high communication load by sending and receiving unnecessary data among units. In this paper, to avoid unnecessary communication, the fully-distributed secondary controller is equipped with an event-triggered strategy based on a new pre-defined condition. The system stability under the proposed event-based control is analyzed using the Lyapunov theorem. The considered scheme is applied to a multi-agent DC microgrid to validate the system performance using Simulink/ MATLAB environment.

Qobad Shafiee

Papers

Event-Triggered Fully-Distributed Secondary Control of Islanded DC Microgrids Using Pre-defined Event Condition