A Review on efficient thermal management of air- and liquid-cooled data centers: From chip to the cooling system

A review of small heat pipes for electronics

Cooling of server electronics: A design review of existing technology

Review: Loop heat pipes with flat evaporators

Experimental studies on a high performance compact loop heat pipe with a square flat evaporator

This paper presents an experimental investigation on a copper miniature loop heat pipe (mLHP) with a flat disk shaped evaporator, 30mm in diameter and 10-mm thick, designed for thermal control of computer microprocessors. Tests were conducted with water as the heat transfer fluid. The device was capable of transferring a heat load of 70W through a distance up to 150mm using 2-mm diameter transport lines. For a range of power applied to the evaporator, the system demonstrated very reliable startup and was able to achieve steady state without any symptoms of wick dry-out. Unlike cylindrical evaporators, flat evaporators are easy to attach to the heat source without need of any cylinder-to-plane reducer material at the interface and thus offer very low thermal resistance to the heat acquisition process. In the horizontal configuration, under air cooling, the minimum value for the mLHP thermal resistance is 0.17degC/W with the corresponding evaporator thermal resistance of 0.06degC/W. It is concluded from the outcomes of the current study that a mLHP with flat evaporator geometry can be effectively used for the thermal control of electronic equipment including notebooks with limited space and high heat flux chipsets. The results also confirm the superior heat transfer characteristics of the copper-water configuration in mLHPs

/pdf/miniature-loop-heat-pipe-with-flat-evaporator-for-cooling-4bytmmeo3r.pdf

R.R. Riehl

Papers

Miniature Loop Heat Pipe With Flat Evaporator for Cooling Computer CPU