Solid-state switch-mode rectification converters have reached a matured level for improving power quality in terms of power-factor correction (PFC), reduced total harmonic distortion at input AC mains and precisely regulated DC output in buck, boost, buck-boost and multilevel modes with unidirectional and bidirectional power flow. This paper deals with a comprehensive review of improved power quality converters (IPQCs) configurations, control approaches, design features, selection of components, other related considerations, and their suitability and selection for specific applications. It is targeted to provide a wide spectrum on the status of IPQC technology to researchers, designers and application engineers working on switched-mode AC-DC converters. A classified list of more than 450 research publications on the state of art of IPQC is also given for a quick reference.

/pdf/a-review-of-single-phase-improved-power-quality-ac-dc-2pm6h4zjxq.pdf

A review of single-phase improved power quality AC-DC converters

New recommendations and future standards have increased the interest in power factor correction circuits. There are multiple solutions in which line current is sinusoidal. In addition, a great number of circuits have been proposed with nonsinusoidal line current. In this paper, a review of the most interesting solutions for single phase and low power applications is carried out. They are classified attending to the line current waveform, energy processing, number of switches, control loops, etc. The major advantages and disadvantages are highlighted and the field of application is found.

Single phase power factor correction: a survey

Solid-state switch mode AC-DC converters having high-frequency transformer isolation are developed in buck, boost, and buck-boost configurations with improved power quality in terms of reduced total harmonic distortion (THD) of input current, power-factor correction (PFC) at AC mains and precisely regulated and isolated DC output voltage feeding to loads from few Watts to several kW. This paper presents a comprehensive study on state of art of power factor corrected single-phase AC-DC converters configurations, control strategies, selection of components and design considerations, performance evaluation, power quality considerations, selection criteria and potential applications, latest trends, and future developments. Simulation results as well as comparative performance are presented and discussed for most of the proposed topologies.

Comprehensive Study of Single-Phase AC-DC Power Factor Corrected Converters With High-Frequency Isolation

A topological review of the single stage power factor corrected (PFC) rectifiers is presented in this paper. Most reported single-stage PFC rectifiers cascade a boost-type converter with a forward or a flyback DC-DC converter so that input current shaping, isolation, and fast output voltage regulation are performed in one single stage. The cost and performance of single-stage PFC converters depend greatly on how its input current shaper (ICS) and the DC-DC converter are integrated together. For the cascade connected single-stage PFC rectifiers, the energy storage capacitor is found in either series or parallel path of energy flow. The second group appears to represent the main stream. Therefore, the focus of this paper is on the second group. It is found that many of these topologies can be implemented by combining a two-terminal or three-terminal boost ICS cell with DC-DC converter along with an energy storage capacitor in between. A general rule is observed that translates a three-terminal ICS cell to a two-terminal ICS cell using an additional winding from the transformer and vice verse. According to the translation rule, many of the reported single-stage PFC topologies can be viewed as electrically equivalent to one another. Several new PFC converters were derived from some existing topologies using the translation rule.

A topology survey of single-stage power factor corrector with a boost type input-current-shaper

A topological review of the single stage power factor corrected (PFC) rectifiers is presented in this paper. Most of reported single-stage PFC rectifiers cascade a boost type converter with a forward or a flyback DC-DC converter so that input current shaping, isolation, and fast output voltage regulation are performed in one single stage. The cost and performance of a single-stage PFC converters depend greatly on how its input current shaper (ICS) and the DC-DC converter are integrated together. For the cascade connected single-stage PFC rectifiers, the energy storage capacitor is found in either series or parallel path of energy flow. The second group appears to represent the main stream. Therefore, the focus of this paper is on this group. It is found that many of these topologies can be implemented by combining a 2-terminal or 3-terminal boost ICS cell with DC-DC converter along with an energy storage capacitor in between. A general rule is observed that translates a 3-terminal ICS cell to a 2-terminal ICS cell using an additional winding from the transformer and vice versa. According to the translation rule, many of reported single-stage PFC topologies can be viewed as electrically equivalent to one another. Several new PFC converters were derived from some existing topologies using the translation rule.

This paper describes a novel passive power-factor correction circuit that ensures the compliance of the capacitively filtered single-phase rectifier with the EN61000-3-2 norm at a cost much lower than the known solutions The circuit can be used to about 300 W The additional components are a small inductor, a small capacitor and a diode

R. Redl

Papers

An economical single-phase passive power-factor-corrected rectifier: topology, operation, extensions, and design for compliance