Low thermal conductivity is a primary limitation in the development of energy-efficient heat transfer fluids that are required in many industrial applications. In this paper we propose that an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat transfer fluids. The resulting {open_quotes}nanofluids{close_quotes} are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluids, and they represent the best hope for enhancement of heat transfer. The results of a theoretical study of the thermal conductivity of nanofluids with copper nanophase materials are presented, the potential benefits of the fluids are estimated, and it is shown that one of the benefits of nanofluids will be dramatic reductions in heat exchanger pumping power.

/pdf/investigation-on-convective-heat-transfer-and-flow-features-3a5qwo5efi.pdf

Investigation on Convective Heat Transfer and Flow Features of Nanofluids

An introduction to heat transfer

In this review we focus on recent developments in applications of bio-inspired special wettable surfaces. We highlight surface materials that in recent years have shown to be the most promising in their respective fields for use in future applications. The selected topics are divided into three groups, applications of superhydrophobic surfaces, surfaces of patterned wettability and integrated multifunctional surfaces and devices. We will present how the bio-inspired wettability has been integrated into traditional materials or devices to improve their performances and to extend their practical applications by developing new functionalities.

Applications of Bio‐Inspired Special Wettable Surfaces

This paper explores the recent research developments in high-heat-flux thermal management. Cooling schemes such as pool boiling, detachable heat sinks, channel flow boiling, microchannel and mini-channel heat sinks, jet-impingement, and sprays, are discussed and compared relative to heat dissipation potential, reliability, and packaging concerns. It is demonstrated that, while different cooling options can be tailored to the specific needs of individual applications, system considerations always play a paramount role in determining the most suitable cooling scheme. It is also shown that extensive fundamental electronic cooling knowledge has been amassed over the past two decades. Yet there is now a growing need for hardware innovations rather than perturbations to those fundamental studies. An example of these innovations is the cooling of military avionics, where research findings from the electronic cooling literature have made possible the development of a new generation of cooling hardware which promise order of magnitude increases in heat dissipation compared to today's cutting edge avionics cooling schemes.

Assessment of high-heat-flux thermal management schemes

Superhydrophobic and superoleophobic surfaces have so far been made by roughening a hydrophobic material. However, no surfaces were able to repel extremely-low-energy liquids such as fluorinated solvents, which completely wet even the most hydrophobic material. We show how roughness alone, if made of a specific doubly reentrant structure that enables very low liquid-solid contact fraction, can render the surface of any material superrepellent. Starting from a completely wettable material (silica), we micro- and nanostructure its surface to make it superomniphobic and bounce off all available liquids, including perfluorohexane. The same superomniphobicity is further confirmed with identical surfaces of a metal and a polymer. Free of any hydrophobic coating, the superomniphobic silica surface also withstands temperatures over 1000°C and resists biofouling.

/pdf/turning-a-surface-superrepellent-even-to-completely-wetting-2dlo3glabg.pdf

Turning a surface superrepellent even to completely wetting liquids

Nucleate pool boiling data for five refrigerants on plain, integral-fin and enhanced tube geometries

This paper provides heat transfer and friction data for single-phase flow in seven 15.54-mm inside diameter tubes having internal helical-rib roughness. The range of geometric parameters were number of rib starts (18 to 45), helix angle (25 to 45 deg), and rib height (0.33 to 0.55 mm). These geometries provide data on a new class of internal enhancement that is typical of commercially rough tubes presently used. The tested geometries provide enhancement by flow separation at the ribs, and by a significant surface area increase. The data were taken with water having 5.08≤Pr≤6.29. Two different correlations were employed to predict the Stanton number and friction factor as a function of geometric variables and Reynolds number. The average deviation of the multiple regression heat transfer and correlations were 2.9 percent and 3.8 percent, respectively. Heat transfer and friction correlations based on the heat-momentum transfer analogy for rough surfaces yielded standard deviations of 1.4 percent and 5.4 percent, respectively. The correlations were shown to reasonably predict the heat transfer and friction for commercially used helical-rib roughened tubes.

Ralph L. Webb

Papers

Nucleate pool boiling data for five refrigerants on plain, integral-fin and enhanced tube geometries

Heat transfer and friction characteristics of internal helical-rib roughness

Friction pressure drop of R-12 in small hydraulic diameter extruded aluminum tubes with and without micro-fins

Condensation of R-12 in small hydraulic diameter extruded aluminum tubes with and without micro-fins

Heat transfer and friction correlations for plate finned-tube heat exchangers having plain fins