Oral surgery, oral medicine, oral pathology, oral radiology and endodontics

Does the adhesive strategy influence the post-operative sensitivity in adult patients with posterior resin composite restorations?: A systematic review and meta-analysis

Clinical studies in restorative dentistry: New directions and new demands

Clinical Relevance Except for the better marginal adaptation that packable resin composite showed, silorane-based restorative, nanofilled resin, and packable resin composite resulted in similar cli...

/pdf/three-year-clinical-evaluation-of-different-restorative-3kiro2gw15.pdf

Three-year Clinical Evaluation of Different Restorative Resins in Class I Restorations

OBJECTIVE
The objective of this study was to review the experimental staining procedures performed in in-vitro studies for evaluating color stability of resin-based composites used for direct restorations.


OVERVIEW
A review was performed with the purpose to identify in vitro procedures carried out to establish staining and color stability of resin-based composites used for direct restorations. A literature search was performed on four online databases (PubMed, Scopus, Embase and Web of Science) for articles published from January 1st 2001 till March 20th 2021, using a combination of free words and Medical Subject Headings (MESH) terms: "Composite Resins" AND "Color Stability" OR "Staining." Two reviewers screened titles and/or abstracts of 1728 unique studies. In total, 208 studies were selected for full-text reading, from which 178 were included in the review. The assessed variables were specimen dimensions, shape, and surface finishing; time before immersion; staining media type, dwell time, temperature and renewal interval; type of composite; color and translucency assessment parameters and measuring system. One hundred and seventy-eight articles analyzed color stability with staining liquids. Coffee was the most used staining medium (n = 102), followed by tea (n = 61), and red wine (n = 55). A disc-shaped specimen was used in most studies (n = 170) with a 2 mm thickness (n = 116). Spectrophotometers were the most used color assessment devices (n = 154), followed by colorimeters (n = 17). Color differences were quantified with ΔE (n = 154), ΔE00 (n = 23). Acceptability and or perceptibility thresholds were also taken into consideration (n = 126).


CONCLUSIONS
The large variety of staining procedure suggests the need for standardization.


CLINICAL SIGNIFICANCE
Aesthetic failure due to discoloration is a relevant clinical problem. Evaluating benefits and drawbacks of resin based composites artificial staining procedures will improve to predict materials clinical performances.

Color stability of resin-based composites: Staining procedures with liquids-A narrative review.

Color stability of dental enamel bleached with violet LED associated with or without Low concentration peroxide gels.

This study evaluates in situ the effect of erbium-doped yttrium aluminum garnet (Er:YAG) laser parameters on the development of caries-like lesions adjacent to dental restorations. One hundred fifty bovine enamel slabs were randomly allocated among 15 volunteers. The specimens were subdivided into ten groups: nine experimental groups prepared with Er:YAG laser (300 mJ output, frequency of 2, 4 or 6 Hz, water flow rate of 2.0, 5.0, or 8.0 mL/min) and one control group (high-speed handpiece). The prepared cavity was restored with a composite resin, and the slabs were mounted on palatal appliance to be installed in the volunteers to the cariogenic challenge. After this, the specimens were sectioned to the longitudinal microhardness measurements. Data were submitted to Friedman and Wilcoxon paired tests. All groups prepared with Er:YAG laser demonstrated microhardness values higher than those prepared with high-speed handpiece, which showed the lowest microhardness values (24.86). The group prepared with Er:YAG laser (2 Hz-2.0 mL/min) showed the highest microhardness values (152.43), followed by those prepared with Er:YAG laser (2 Hz-5.0 mL/min) (133.08) and Er:YAG laser (2 Hz-8.0 mL/min) (91.61), respectively. The groups Er:YAG laser with 4 and 6 Hz of frequency and water flow rates of 2.0, 5.0, and 8.0 mL/min showed microhardness values lower than the groups cited above and showed statistical similarity among them. The Er:YAG laser parameters employed to cavity preparation influenced the acid resistance of the irradiated substrate, and the Er:YAG laser was capable to control the development of caries-like lesions around composite resin restorations.

Effect of Er:YAG laser on enamel demineralization around restorations

This in situ study evaluated the effect of Er:YAG laser irradiation in controlling the progression of enamel erosion-like lesions. Fifty-six enamel slabs (330 KHN ± 10 %) with one fourth of the surface covered with resin composite (control area) were submitted to initial erosion-like lesion formation with citric acid. The slabs were divided into two groups: irradiated with Er:YAG laser and non-irradiated. Fourteen volunteers used an intraoral palatal appliance containing two slabs, in two phases of 5 days each. During the intraoral phase, in a crossed-over design, half of the volunteers immersed the appliance in citric acid while the other half used deionized water, both for 5 min, three times per day. Enamel wear was determined by an optical 3D profilometer. ANOVA revealed that when deionized water was used as immersion solution during the intraoral phase, lower values of wear were showed when compared with the groups that were eroded with citric acid, whether irradiated or non-irradiated with Er:YAG laser. When erosion with citric acid was performed, Er:YAG laser was not able to reduce enamel wear. Small changes on enamel surface were observed when it was irradiated with Er:YAG laser. It may be concluded that Er:YAG laser irradiation did not reduce the progression of erosive lesions on enamel submitted to in situ erosion with citric acid.

Er:YAG laser irradiation to control the progression of enamel erosion: an in situ study

Objective To assess the influence of antioxidants (sodium ascorbate - SA, epigallocatechin-3-gallate (EGCG) from Camellia sinensis and punicalagin from Punica granatum) or lasers (Er:YAG and diode) on bleached dentin. Methods Four hundred and forty slabs of intracoronary dentin were prepared: 224 for bond strength (debonding test) (n = 14), 96 for chemical analysis (EDS) and morphology (SEM) (n = 6), 96 for interface analysis (n = 6) and 24 for atomic force microscopy (AFM). The slabs were distributed according to the post-treatment after bleaching (35% hydrogen peroxide): GI- no bleaching and no post-treatment, GII- only bleached, GIII- 10-days delay in restorative procedure, GIV- 10% SA (10 min), GV- 0.5% EGCG (10 min), GVI- 0.5% punicalagin (10 min), GVII- Er:YAG laser (0.80W, 20s) and GVIII- diode laser (1.5W, 20s). Restorative procedures were done. Half of the slabs were analyzed immediately and the others, after 12 months. Debonding and AFM data were analyzed by ANOVA and Tukey tests (α = 0.05). Results All the post-treatments, except for punicalagin, reestablished the immediate bond strength, similar to those restored after 10 days (p > 0.05). Following degradation, EGCG and punicalagin reestablished the bond strength (p  Conclusion Sodium ascorbate, EGCG or lasers restored the immediate bond strength, but only the natural extracts were effective in the long-term durability of resin. Thus, EGCG at 0.5% for 10 min seems to be the best pre-restorative treatment for bleached substrate.

Durability of resin on bleached dentin treated with antioxidant solutions or lasers

The aim of this study was to evaluate the effect of 24% ethylenediaminetetraacetic acid (EDTA) gel and 2% chlorhexidine gel (CHX) in dentin permeability and smear layer removal from root canals instrumented with NiTi rotary system using histochemical staining and scanning electron microscopy (SEM) analysis. Overall, 43 premolars were classified into two experimental groups, EDTA (n = 20) and CHX (n = 20), and a negative control (NC) (n = 3). All specimens were instrumented and the irrigant solutions were used after each file change. The EDTA group received a final rinse with 5-ml 1% NaOCl followed by a 5-ml 0.9% saline solution; the CHX group received a final rinse with 10-ml 0.9% saline solution; and the negative control group received a final rinse with only 0.9% saline solution. Fifteen teeth from each group were prepared for histochemical staining and evaluation of dentin permeability using the image-scanning software Axion Vision (v.4.8.2). Five remaining teeth were prepared for analysis using SEM for morphological analysis. The study found that 24% EDTA gel increased the permeability of dentin in all thirds evaluated and also demonstrated an increased cleaning ability, with dentinal walls free of smear layer and open dentinal tubules, as compared to 2% CHX gel. It was concluded that EDTA was efficient in cleaning the dentinal tubules and increased dentin permeability.

Renata Siqueira Scatolin

Papers

Color stability of dental enamel bleached with violet LED associated with or without Low concentration peroxide gels.

Effect of Er:YAG laser on enamel demineralization around restorations

Er:YAG laser irradiation to control the progression of enamel erosion: an in situ study

Durability of resin on bleached dentin treated with antioxidant solutions or lasers

Effects of EDTA gel and chlorhexidine gel on root dentin permeability