Showing papers by "Rosario Benavente published in 2022"

Effect of Graphene Nanofibers on the Morphological, Structural, Thermal, Phase Transitions and Mechanical Characteristics in Metallocene iPP Based Nanocomposites

Abstract: Several nanocomposites were prepared by extrusion from a commercial metallocene-type isotactic polypropylene (iPP) and different amounts of two types of graphene (G) nanofibers: ones with a high specific surface, named GHS, and the others with a low specific surface, labeled as GLS. The number of graphene layers was found to be around eight for GLS and about five in the GHS. Scanning electron microscopy (SEM) images of the resultant iPP nanocomposites showed a better homogeneity in the dispersion of the GLS nanofibers within the polymeric matrix compared with the distribution observed for the GHS ones. Crystallinity in the nanocomposites turned out to be dependent upon graphene content and upon thermal treatment applied during film preparation, the effect of the nature of the nanofiber being negligible. Graphene exerted a noticeable nucleating effect in the iPP crystallization. Furthermore, thermal stability was enlarged, shifting to higher temperatures, with increasing nanofiber amount. The mechanical response changed significantly with nanofiber type, along with its content, together with the thermal treatment applied to the nanocomposites. Features of nanofiber surface played a key role in the ultimate properties related to superficial and bulk stiffness.

Mechanical and antimicrobial properties of low‐density‐polyethylene/ MgO nanocomposites

Abstract: Low-density polyethylene (LDPE) nanocomposites containing magnesium oxide (MgO) nanoparticles are obtained by melt mixing. MgO nanoparticles ca. 29 ± 2 nm are synthesized by sol–gel and organically modified on the surface with oleic acid (Mod-MgO), whose final concentration in the polymers is 3, 5, and 10 wt%. The presence of these nanoparticles did not affect the crystallization process of LDPE. However, Young's modulus increases with 10 wt% of Mod-MgO nanoparticles, rendering higher reinforcement effects with an increase as high as 48%. This affects the elongation at break, which decreases ca. 57% compared to neat LDPE. The storage and loss modulus of the LDPE/MgO and LDPE/Mod-MgO nanocomposites increases at room temperature and low temperatures (−150 to −50°C) compared to neat LDPE. SEM analysis showed that the organic modification of MgO nanoparticles improved their dispersion within the polymer matrix. Nanocomposites present antimicrobial properties against Escherichia coli, reaching an efficiency ca. 53%.