The annual world photovoltaic (PV) cell/module production is growing at almost an exponential rate and has reached 1727 MW in 2005. Building integrated PV (BIPV) projects are emerging as the strongest part of the PV market and grid interactive inverters are a key component in determining the total system cost. Module integrated converter (MIC) technology has become a global trend in grid interactive PV applications and may assist in driving down the balance of system costs to secure an improved total system cost. This paper concentrates on the topology study of the PV MICs in the power range below 500 W and covers most topologies recently proposed for MIC applications. The MIC topologies are classified into three different arrangements based on the dc link configurations. A systematic discussion is also provided at the end of the paper that focuses on the major advantages and disadvantages of each MIC arrangement. These are considered in detail and will provide a useful framework and point of reference for the next generation MIC designs and applications.

/pdf/a-review-of-the-single-phase-photovoltaic-module-integrated-5esytqj7r8.pdf

A Review of the Single Phase Photovoltaic Module Integrated Converter Topologies With Three Different DC Link Configurations

Current-voltage and power-voltage characteristics of large photovoltaic (PV) arrays under partially shaded conditions are characterized by multiple steps and peaks. This makes the tracking of the actual maximum power point (MPP) [global peak (GP)] a difficult task. In addition, most of the existing schemes are unable to extract maximum power from the PV array under these conditions. This paper proposes a novel algorithm to track the global power peak under partially shaded conditions. The formulation of the algorithm is based on several critical observations made out of an extensive study of the PV characteristics and the behavior of the global and local peaks under partially shaded conditions. The proposed algorithm works in conjunction with a DC-DC converter to track the GP. In order to accelerate the tracking speed, a feedforward control scheme for operating the DC-DC converter is also proposed, which uses the reference voltage information from the tracking algorithm to shift the operation toward the MPP. The tracking time with this controller is about one-tenth as compared to a conventional controller. All the observations and conclusions, including simulation and experimental results, are presented.

Maximum Power Point Tracking Scheme for PV Systems Operating Under Partially Shaded Conditions

This paper presents simulation and hardware implementation of incremental conductance (IncCond) maximum power point tracking (MPPT) used in solar array power systems with direct control method. The main difference of the proposed system to existing MPPT systems includes elimination of the proportional-integral control loop and investigation of the effect of simplifying the control circuit. Contributions are made in several aspects of the whole system, including converter design, system simulation, controller programming, and experimental setup. The resultant system is capable of tracking MPPs accurately and rapidly without steady-state oscillation, and also, its dynamic performance is satisfactory. The IncCond algorithm is used to track MPPs because it performs precise control under rapidly changing atmospheric conditions. MATLAB and Simulink were employed for simulation studies, and Code Composer Studio v3.1 was used to program a TMS320F2812 digital signal processor. The proposed system was developed and tested successfully on a photovoltaic solar panel in the laboratory. Experimental results indicate the feasibility and improved functionality of the system.

Simulation and Hardware Implementation of Incremental Conductance MPPT With Direct Control Method Using Cuk Converter

This paper looks at the performance of photovoltaic modules in nonideal conditions and proposes topologies to minimize the degradation of performance caused by these conditions. It is found that the peak power point of a module is significantly decreased due to only the slightest shading of the module, and that this effect is propagated through other nonshaded modules connected in series with the shaded one. Based on this result, two topologies for parallel module connections have been outlined. In addition, dc/dc converter technologies, which are necessary to the design, are compared by way of their dynamic models, frequency characteristics, and component cost. Out of this comparison, a recommendation has been made

Topology Study of Photovoltaic Interface for Maximum Power Point Tracking

Power processing systems will be a key factor of future photovoltaic (PV) applications. They will play a central role in transferring, to the load and/or to the grid, the electric power produced by the high-efficiency PV cells of the next generation. In order to come up the expectations related to the use of solar energy for producing electrical energy, such systems must ensure high efficiency, modularity, and, particularly, high reliability. The goal of this paper is to provide an overview of the open problems related to PV power processing systems and to focus the attention of researchers and industries on present and future challenges in this field.

Reliability Issues in Photovoltaic Power Processing Systems

Most issues carried out about building integrated photovoltaic (PV) system performance show average losses of about 20%-25% in electricity production. The causes are varied, e.g., mismatching losses, partial shadows, variations in current-voltage (I-V) characteristics of PV modules due to manufacturing processes, differences in the orientations and inclinations of solar surfaces, and temperature effects. These losses can be decreased by means of suitable electronics. This paper presents the intelligent PV module concept, a low-cost high-efficiency dc-dc converter with maximum power point tracking (MPPT) functions, control, and power line communications (PLC). In addition, this paper analyses the alternatives for the architecture of grid-connected PV systems: centralized, string, and modular topologies. The proposed system, i.e., the intelligent PV module, fits within this last group. Its principles of operation, as well as the topology of boost dc-dc converter, are analyzed. Besides, a comparison of MPPT methods is performed, which shows the best results for the incremental conductance method. Regarding communications, PLC in every PV module and its feasibility for grid-connected PV plants are considered and analyzed in this paper. After developing an intelligent PV module (with dc-dc converter) prototype, its optimal performance has been experimentally confirmed by means of the PV system test platform. This paper describes this powerful tool especially designed to evaluate all kinds of PV systems

Intelligent PV Module for Grid-Connected PV Systems

Most issues carried out about building integrated PV systems (BIPV) performance show average losses about 20-25% in electricity production. The causes are varied: mismatching losses, partial shadows, variations in I-V characteristics of PV modules due to manufacturing processes, differences in the orientations and inclinations of solar surfaces, temperature effects, etc. Most losses can be decreased by means of a suitable electronics. This paper shows the Intelligent PV Module concept, a low cost and high efficiency DC-DC converter with MPPT functions, control and power line communications (PLC). Several DC-DC configurations have been considered as well as MPPT methods and communication options. Matlab simulations describe how this Intelligent PV Module can make a significant improvement in the energy delivered, above all in facades and roofs, in which the number of modules and the external conditions make this device most suitable.

S. Elorduizapatarietxe

Papers

Intelligent PV Module for Grid-Connected PV Systems

Intelligent PV module for grid-connected PV systems

Experimental results of controlled PV module for building integrated PV systems

BIPV System Monitoring, Diagnosis and Maintenance Software