-phenylenevinylene)s L4. Fluorene-Based Conjugated Polymers L4.1. Fluorene-Based Copolymers ContainingElectron-Rich MoietiesM4.2. Fluorene-Based Copolymers ContainingElectron-Deﬁcient MoietiesN4.3. Fluorene-Based Copolymers ContainingPhosphorescent ComplexesQ5. Carbazole-Based Conjugated Polymers R5.1. Poly(2,7-carbazole)-Based Polymers R5.2. Indolo[3,2-

https://ir.nctu.edu.tw:443/bitstream/11536/6508/1/000271856900020.pdf

Synthesis of Conjugated Polymers for Organic Solar Cell Applications

Solution-processed bulk-heterojunction solar cells have gained serious attention during the last few years and are becoming established as one of the future photovoltaic technologies for low-cost power production. This article reviews the highlights of the last few years, and summarizes today's state-of-the-art performance. An outlook is given on relevant future materials and technologies that have the potential to guide this young photovoltaic technology towards the magic 10% regime. A cost model supplements the technical discussions, with practical aspects any photovoltaic technology needs to fulfil, and answers to the question as to whether low module costs can compensate lower lifetimes and performances.

https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.200801283

Polymer‐Fullerene Bulk‐Heterojunction Solar Cells

Stability/degradation of polymer solar cells

Organic photovoltaics (OPVs) evolve in an exponential manner in the two key areas of efficiency and stability. The power conversion efficiency (PCE) has in the last decade been increased by almost a factor of ten approaching 10%. A main concern has been the stability that was previously measured in minutes, but can now, in favorable circumstances, exceed many thousands of hours. This astonishing achievement is the subject of this article, which reviews the developments in stability/degradation of OPVs in the last five years. This progress has been gained by several developments, such as inverted device structures of the bulk heterojunction geometry device, which allows for more stable metal electrodes, the choice of more photostable active materials, the introduction of interfacial layers, and roll-to-roll fabrication, which promises fast and cheap production methods while creating its own challenges in terms of stability.

Stability of polymer solar cells.

In the last three decades, zero-dimensional, one-dimensional, and two-dimensional carbon nanomaterials (i.e., fullerenes, carbon nanotubes, and graphene, respectively) have attracted significant attention from the scientific community due to their unique electronic, optical, thermal, mechanical, and chemical properties. While early work showed that these properties could enable high performance in selected applications, issues surrounding structural inhomogeneity and imprecise assembly have impeded robust and reliable implementation of carbon nanomaterials in widespread technologies. However, with recent advances in synthesis, sorting, and assembly techniques, carbon nanomaterials are experiencing renewed interest as the basis of numerous scalable technologies. Here, we present an extensive review of carbon nanomaterials in electronic, optoelectronic, photovoltaic, and sensing devices with a particular focus on the latest examples based on the highest purity samples. Specific attention is devoted to each class of carbon nanomaterial, thereby allowing comparative analysis of the suitability of fullerenes, carbon nanotubes, and graphene for each application area. In this manner, this article will provide guidance to future application developers and also articulate the remaining research challenges confronting this field.

Carbon nanomaterials for electronics, optoelectronics, photovoltaics, and sensing

A new method for the preparation of active layers of polymeric solar cells without the need for thermal post-treatment to obtain optimal performance is presented. Poly(3-hexylthiophene) (P3HT) nanofibers are obtained in highly concentrated solutions, which enables the fabrication of nanostructured films on various substrates. Here, the preparation of these fibers along with their characterization in solution and in the solid state is detailed. By mixing these nanofibers with a molecular acceptor such as [6,6]-phenyl C61-butyric acid methyl ester (PCBM) in solution, it is possible to obtain in a simple process a highly efficient active layer for organic solar cells with a demonstrated power conversion efficiency (PCE) of up to 3.6 %. The compatibility of the room-temperature process developed herein with commonly used plastic substrates may lead to applications such as the development of large-area flexible solar cells.

Poly(3‐hexylthiophene) Fibers for Photovoltaic Applications

This Full Paper focuses on the preparation of single-walled or multi-walled carbon nanotube solutions with regioregular poly(3-hexylthiophene) (P3HT) and a fullerene derivative 1-(3-methoxycarbonyl) propyl-1 -phenyl[6,6]C 61 (PCBM) using a high dissolution and concentration method to exactly control the ratio of carbon nanotubes (CNTs) to the P3HT/PCBM mixture and disperse the CNTs homogeneously throughout the matrix. The CNT/P3HT/PCBM composites are deposed using a spin-coating technique and characterized by absorption and fluorescence spectroscopy and by atomic force microscopy to underline the structure and the charge transfer between the CNTs and P3HT. The performance of photovoltaic devices obtained using these composites as a photoactive layer mainly show an increase of the short circuit current and a slight decrease of the open circuit voltage which generally leads to an improvement of the solar cell performances to an optimum CNT percentage. The best results are obtained with a P3HT/PCBM (1:1) mixture with 0.1 wt % multi-walled carbon nanotubes with an open circuit voltage (V oc ) of 0.57 V, a current density at the short-circuit (I sc ) of 9.3 mA cm -2 and a fill factor of 38.4 %, which leads to a power conversion efficiency of 2.0 % (irradiance of 100 mW cm -2 spectroscopically distributed following AM1.5).

S. Guillerez

Papers

Poly(3‐hexylthiophene) Fibers for Photovoltaic Applications

Elaboration of P3HT/CNT/PCBM Composites for Organic Photovoltaic Cells

Definition of encapsulation barrier requirements: A method applied to organic solar cells