Über die Adsorption in Lösungen

Photocatalytic degradation of organic pollutants using TiO2-based photocatalysts: A review

The rapid increase in toxic dye wastewater generated from various industries remains a severe public health issue and prime environmental protection concern, posing a major challenge to existing conventional water treatment systems. Consequently, various physicochemical and biological treatment processes have been studied, which exhibit varying removal abilities depending on their experimental constraints. Among them, adsorption is considered to be the most efficient due to its high removal efficiency, easy operation, cost-effectiveness, and recyclability of the adsorbents. Considering this, the present review article focused on presenting a comprehensive summary of the various types of adsorbents such as commercial activated carbon, metal oxide-based, carbon-based, metal–organic framework, and polymer-based adsorbents used in dye remediation of contaminated water. The effects of several critical factors such as initial dye concentration, solution pH, temperature, and adsorbent dose on the dye adsorption performance are also described. In addition, the adsorption mechanisms responsible for dye removal are explained based on electrostatic attraction, ion exchange, surface complexation, and π–π interactions. Finally, critiques, future perspectives, and a summary of the present article are given. Various adsorbents such as carbon-based materials, metal oxides, bio-adsorbents, and polymer-based materials, have been shown to be efficient for the removal of dye pollutants from wastewater. Thus, it is anticipated that dye removal by adsorption can provide a feasible solution for the treatment of dye-laden water.

/pdf/recent-advances-on-the-removal-of-dyes-from-wastewater-using-3bk6szbeul.pdf

Recent advances on the removal of dyes from wastewater using various adsorbents: A critical review

The unavailability of clean drinking water is one of the significant health issues in modern times. Industrial dyes are one of the dominant chemicals that make water unfit for drinking. Among these dyes, methylene blue (MB) is toxic, carcinogenic, and non-biodegradable and can cause a severe threat to human health and environmental safety. It is usually released in natural water sources, which becomes a health threat to human beings and living organisms. Hence, there is a need to develop an environmentally friendly, efficient technology for removing MB from wastewater. Photodegradation is an advanced oxidation process widely used for MB removal. It has the advantages of complete mineralization of dye into simple and nontoxic species with the potential to decrease the processing cost. This review provides a tutorial basis for the readers working in the dye degradation research area. We not only covered the basic principles of the process but also provided a wide range of previously published work on advanced photocatalytic systems (single-component and multi-component photocatalysts). Our study has focused on critical parameters that can affect the photodegradation rate of MB, such as photocatalyst type and loading, irradiation reaction time, pH of reaction media, initial concentration of dye, radical scavengers and oxidising agents. The photodegradation mechanism, reaction pathways, intermediate products, and final products of MB are also summarized. An overview of the future perspectives to utilize MB at an industrial scale is also provided. This paper identifies strategies for the development of effective MB photodegradation systems.

https://www.mdpi.com/2073-4441/14/2/242/pdf?version=1642404093

Review on Methylene Blue: Its Properties, Uses, Toxicity and Photodegradation

Several industries release varying concentration of dye-laden effluent with substantial negative consequences for any receiving environmental compartment. The control of water pollution and tighter restriction on wastewater discharge directly into the environment to reduce the potential ecotoxicological effect of dyes is forcing processors to retreat and reuse process water and chemicals. Among the different available technologies, the adsorption process has been recognized to be one of the finest and cost-effective wastewater treatment technologies. Various adsorbents have been utilized to remove toxic dyes from water and wastewater. Here, we review the application of polyaniline-based polymeric adsorbent for the adsorption of dyes which have been received considerable attention. To date, various modifications of polyaniline have been explored to improve the adsorption properties. Review on the application of polyaniline for adsorption of dyes has not been present till date. This article provides relevant literature on the application of various polyaniline composites for removing dyes, and their adsorption capacities with their experimental conditions have been compiled. It is evident from the literature survey that polyaniline provides a better opportunity for scientists for the effective removal of various dye.

Application of polyaniline-based adsorbents for dye removal from water and wastewater—a review

In the present work, the potential of citrus limetta peel (CLP) as a low cost adsorbent for the removal of Methylene blue (MB) dye was investigated. Batch adsorption studies were conducted to find out how adsorption was affected by various factors like contact time, initial dye concentration, adsorbent dosage, pH and temperature. The experimental data was analysed in the light of Langmuir, Freundlich and Temkin isotherm models. The data was found to be best represented by Langmuir adsorption isotherm with maximum adsorption capacity for monolayer coverage was found to be 227.3 mg/g. The data were analysed in the light of different available kinetic models and was observed to be best followed pseudo-second order kinetics. Desorption of MB-loaded CLP was studied with various desorbing agents and HCl was found to be most effective desorbing agent among HCl, NaOH, NaCl, CH3COOH and deionised doubly distilled water (DDDW). Results suggest that CLP is a very effective low cost adsorbent for the removal of dyes from wastewater.

Removal of methylene blue dye from artificially contaminated water using citrus limetta peel waste as a very low cost adsorbent

Adsorptive treatment of hazardous methylene blue dye from artificially contaminated water using cucumis sativus peel waste as a low-cost adsorbent

Adsorptive decontamination of synthetic wastewater containing crystal violet dye by employing Terminalia arjuna sawdust waste

In the present investigation, the applicability of Cucumis sativus peel (CSP) waste as an inexpensive biosorbent for the confiscation of harmful crystal violet (CV) dye from synthetically polluted ...

Sadia Shakoor

Papers

Removal of methylene blue dye from artificially contaminated water using citrus limetta peel waste as a very low cost adsorbent

Adsorptive treatment of hazardous methylene blue dye from artificially contaminated water using cucumis sativus peel waste as a low-cost adsorbent

Adsorptive decontamination of synthetic wastewater containing crystal violet dye by employing Terminalia arjuna sawdust waste

Utilization of Cucumis Sativus Peel as an Eco-Friendly Biosorbent for the Confiscation of Crystal Violet Dye from Artificially Contaminated Wastewater

Remediation of dyes from industrial wastewater using low-cost adsorbents