A fundamental aim in the field of catalysis is the development of new modes of small molecule activation. One approach toward the catalytic activation of organic molecules that has received much attention recently is visible light photoredox catalysis. In a general sense, this approach relies on the ability of metal complexes and organic dyes to engage in single-electron-transfer (SET) processes with organic substrates upon photoexcitation with visible light.

Many of the most commonly employed visible light photocatalysts are polypyridyl complexes of ruthenium and iridium, and are typified by the complex tris(2,2′-bipyridine) ruthenium(II), or Ru(bpy)32+ (Figure 1). These complexes absorb light in the visible region of the electromagnetic spectrum to give stable, long-lived photoexcited states.1,2 The lifetime of the excited species is sufficiently long (1100 ns for Ru(bpy)32+) that it may engage in bimolecular electron-transfer reactions in competition with deactivation pathways.3 Although these species are poor single-electron oxidants and reductants in the ground state, excitation of an electron affords excited states that are very potent single-electron-transfer reagents. Importantly, the conversion of these bench stable, benign catalysts to redox-active species upon irradiation with simple household lightbulbs represents a remarkably chemoselective trigger to induce unique and valuable catalytic processes.






Open in a separate window


Figure 1


Ruthenium polypyridyl complexes: versatile visible light photocatalysts.

/pdf/visible-light-photoredox-catalysis-with-transition-metal-5d1oxrsczo.pdf

Visible Light Photoredox Catalysis with Transition Metal Complexes: Applications in Organic Synthesis

Objective evaluation of the activity of electrocatalysts for water oxidation is of fundamental importance for the development of promising energy conversion technologies including integrated solar water-splitting devices, water electrolyzers, and Li-air batteries. However, current methods employed to evaluate oxygen-evolving catalysts are not standardized, making it difficult to compare the activity and stability of these materials. We report a protocol for evaluating the activity, stability, and Faradaic efficiency of electrodeposited oxygen-evolving electrocatalysts. In particular, we focus on methods for determining electrochemically active surface area and measuring electrocatalytic activity and stability under conditions relevant to an integrated solar water-splitting device. Our primary figure of merit is the overpotential required to achieve a current density of 10 mA cm–2 per geometric area, approximately the current density expected for a 10% efficient solar-to-fuels conversion device. Utilizing ...

Benchmarking Heterogeneous Electrocatalysts for the Oxygen Evolution Reaction

A comprehensive review on PEM water electrolysis

Objective comparisons of electrocatalyst activity and stability using standard methods under identical conditions are necessary to evaluate the viability of existing electrocatalysts for integration into solar-fuel devices as well as to help inform the development of new catalytic systems. Herein, we use a standard protocol as a primary screen for evaluating the activity, short-term (2 h) stability, and electrochemically active surface area (ECSA) of 18 electrocatalysts for the hydrogen evolution reaction (HER) and 26 electrocatalysts for the oxygen evolution reaction (OER) under conditions relevant to an integrated solar water-splitting device in aqueous acidic or alkaline solution. Our primary figure of merit is the overpotential necessary to achieve a magnitude current density of 10 mA cm–2 per geometric area, the approximate current density expected for a 10% efficient solar-to-fuels conversion device under 1 sun illumination. The specific activity per ECSA of each material is also reported. Among HER...

Benchmarking Hydrogen Evolving Reaction and Oxygen Evolving Reaction Electrocatalysts for Solar Water Splitting Devices

Surface-enhanced Raman scattering (SERS) has become a mature vibrational spectroscopic technique during the last decades and the number of applications in the chemical, material, and in particular life sciences is rapidly increasing. This Review explains the basic theory of SERS in a brief tutorial and-based on original results from recent research-summarizes fundamental aspects necessary for understanding SERS and provides examples for the preparation of plasmonic nanostructures for SERS. Chemical applications of SERS are the centerpiece of this Review. They cover a broad range of topics such as catalysis and spectroelectrochemistry, single-molecule detection, and (bio)analytical chemistry.

Surface-enhanced Raman spectroscopy: concepts and chemical applications.

The definition of a “primary method of measurement ” has permitted a full consideration of the definition of primary standards for pH, determined by a primary method (cell without transference, Harned cell), of the definition of secondary standards by secondary methods, and of the question whether pH, as a conventional quantity, can be incorporated within the internationally accepted system of measurement, the International System of Units (SI, Systeme International d’ Unites). This approach has enabled resolution of the previous compromise IUPAC 1985 Recommendations [Pure Appl. Chem. 57, 531 (1985)]. Furthermore, incorporation of the uncertainties for the primary method, and for all subsequent measurements, permits the uncertainties for all procedures to be linked to the primary standards by an unbroken chain of comparisons. Thus, a rational choice can be made by the analyst of the appropriate procedure to achieve the target uncertainty of sample pH. Accordingly, this document explains IUPAC recommended definitions, procedures, and terminology relating to pH measurements in dilute aqueous solutions in the temperature range 5-50 °C. Details are given of the primary and secondary methods for measuring pH and the rationale for the assignment of pH values with appropriate uncertainties to selected primary and secondary substances.

/pdf/measurement-of-ph-definition-standards-and-procedures-iupac-4guqmo8nm3.pdf

Measurement of pH. definition, standards, and procedures: (IUPAC Recommendations 2002)

The construction and use of “dynamic potential–pH diagrams” (DPPDs), that are intended to extend the usefulness of thermodynamic Pourbaix diagrams to include kinetic considerations is described. As an example, DPPDs are presented for the comparison of electrocatalysts for water oxidation, i.e., the oxygen evolution reaction (OER), an important electrochemical reaction because of its key role in energy conversion devices and biological systems (water electrolyses, photoelectrochemical water splitting, plant photosynthesis). The criteria for obtaining kinetic data are discussed and a 3-D diagram, which shows the heterogeneous electron transfer kinetics of an electrochemical system as a function of pH and applied potential is presented. DPPDs are given for four catalysts: IrO2, Co3O4, Co3O4 electrodeposited in a phosphate medium (Co–Pi) and Pt, allowing a direct comparison of the activity of different electrode materials over a broad range of experimental conditions (pH, potential, current density). In addition, the experimental setup and the factors affecting the accurate collection and presentation of data (e.g., reference electrode system, correction of ohmic drops, bubble formation) are discussed.

/pdf/dynamic-potential-ph-diagrams-application-to-3zd4cxgsgq.pdf

Dynamic potential–pH diagrams application to electrocatalysts for water oxidation

In this work the oxidation states assumed by Ir in oxide systems used as heterogeneous catalysts for water oxidation are determined by means of in situ X-ray Absorption Spectroscopy (XAS). Using a highly hydrated iridium oxide film allows the maximum number of Ir sites to be involved in the electrochemical processes occurring at the catalysts during water oxidation (oxygen evolution reaction, OER). X-ray Absorption Near Edge Structure (XANES) spectra clearly indicate the co-existence of Ir(III) and Ir(V) at the electrode potentials where OER occurs. This represents a fundamental step both in the understanding of the water oxidation mechanism catalysed by heterogeneous Ir oxide systems, and in the possible tailoring of electrocatalysts for OER.

/pdf/observing-the-oxidation-state-turnover-in-heterogeneous-4yqltj6v2s.pdf

Observing the oxidation state turnover in heterogeneous iridium-based water oxidation catalysts

Criteria for standardization of pH measurements in organic solvents and water + organic solvent mixtures of moderate to high permittivities

Chairman: J. Jordan (USA); Secretary: K. Izutsu (Japan); Titular Members: A. K. Covington (UK); J. Juillard (France); R. C. Kapoor (India); E. Pungor (Hungary); Associate Members: W. Davison (UK); R. A. Durst (USA); M. Gross (France); K. M. Kadish (USA); R. Kalvoda (Czechoslovakia); H. Kao (China); Y. Marcus (Israel); T. Mussini (Italy); H. W. NUrnberg (FRG); M. Senda (Japan); N. Tanaka (Japan); K. TOth (Hungary); NationaiRepresentatives: D. D. Perrin (Australia); B. Gilbert (Belgium); W. C. Purdy (Canada); A. A. V1ek (Czechoslovakia); H. Monien (FRG); M. L'Her (France); Gy. Farsang (Hungary); H. C. Gaur (India); W. F. Smyth (Ireland); E. Grushka (Israel); S. R. Cavallari (Italy); W. Frankvoort (Netherlands); Z. Galus (Poland); G. Johansson (Sweden); J. Buffle (Switzerland); H. Thompson (UK); J. G. Osteryoung (USA); I. Piljac (Yugoslavia).

/pdf/reference-value-standards-and-primary-standards-for-ph-48jhuo25fp.pdf

Reference value standards and primary standards for pH measurements in organic solvents and water + organic solvent mixtures of moderate to high permittivities

Sandra Rondinini

Papers

Measurement of pH. definition, standards, and procedures: (IUPAC Recommendations 2002)

Dynamic potential–pH diagrams application to electrocatalysts for water oxidation

Observing the oxidation state turnover in heterogeneous iridium-based water oxidation catalysts

Criteria for standardization of pH measurements in organic solvents and water + organic solvent mixtures of moderate to high permittivities

Reference value standards and primary standards for pH measurements in organic solvents and water + organic solvent mixtures of moderate to high permittivities