This paper summarizes recent research dealing with development of titanium dioxide (TiO2) used for environmental applications. TiO2 plays the most important role owing to its excellent chemical and physical properties. However, the TiO2 band edge lies in the UV region that makes them inactive under visible irradiation. In this regard, considerable efforts have been made to increase the visible light activity of TiO2 via the modification of its electronic and optical properties. Doping TiO2 using either anions or cations is one of the typical approaches that has been largely applied. Coupling TiO2 with a narrow bad gap semiconductor (MxOy/TiO2 or MxSy/TiO2) represents another approach. This work aims to encompass the new progress of TiO2 for an efficient application in water and wastewater treatment under visible light, emphasizes the future trends of TiO2 in the environment, and suggests new research directions, including preparation aspects for the development of this promising material.

Modified TiO2 For Environmental Photocatalytic Applications: A Review

This article reports on the International Nanofluid Property Benchmark Exercise, or INPBE, in which the thermal conductivity of identical samples of colloidally stable dispersions of nanoparticles or “nanofluids,” was measured by over 30 organizations worldwide, using a variety of experimental approaches, including the transient hot wire method, steady-state methods, and optical methods. The nanofluids tested in the exercise were comprised of aqueous and nonaqueous basefluids, metal and metal oxide particles, near-spherical and elongated particles, at low and high particle concentrations. The data analysis reveals that the data from most organizations lie within a relatively narrow band (±10% or less) about the sample average with only few outliers. The thermal conductivity of the nanofluids was found to increase with particle concentration and aspect ratio, as expected from classical theory. There are (small) systematic differences in the absolute values of the nanofluid thermal conductivity among the various experimental approaches; however, such differences tend to disappear when the data are normalized to the measured thermal conductivity of the basefluid. The effective medium theory developed for dispersed particles by Maxwell in 1881 and recently generalized by Nan et al. [J. Appl. Phys. 81, 6692 (1997)], was found to be in good agreement with the experimental data, suggesting that no anomalous enhancement of thermal conductivity was achieved in the nanofluids tested in this exercise.

A Benchmark Study on the Thermal Conductivity of Nanofluids

Potentials of engineered nanoparticles as fertilizers for increasing agronomic productions

Review on the improvement of the photocatalytic and antibacterial activities of ZnO

The continuous combustion of non-renewable fossil fuels and depletion of existing resources is intensifying the research and development of alternative future energy options that can directly abate and process ever-increasing carbon dioxide (CO2) emissions. Since CO2 is a thermodynamically stable compound, its reduction must not consume additional energy or increase net CO2 emissions. Renewable sources like solar energy provide readily available and continuous light supply required for driving this conversion process. Therefore, the use of solar energy to drive CO2 photocatalytic reactions simultaneously addresses the aforementioned challenges, while producing sustainable fuels or chemicals suitable for use in existing energy infrastructure. Recent progress in this area has focused on the development and testing of promising TiO2 based photocatalysts in different reactor configurations due to their unique physicochemical properties for CO2 photoreduction. TiO2 nanostructured materials with different morphological and textural properties modified by using organic and inorganic compounds as photosensitizers (dye sensitization), coupling semiconductors of different energy levels or doping with metals or non-metals have been tested. This review presents contemporary views on state of the art in photocatalytic CO2 reduction over titanium oxide (TiO2) nanostructured materials, with emphasis on material design and reactor configurations. In this review, we discuss existing and recent TiO2 based supports, encompassing comparative analysis of existing systems, novel designs being employed to improve selectivity and photoconversion rates as well as emerging opportunities for future development, crucial to the field of CO2 photocatalytic reduction. The influence of different operating and morphological variables on the selectivity and efficiency of CO2 photoreduction is reviewed. Finally, perspectives on the progress of TiO2 induced photocatalysis for CO2 photoreduction will be presented.

/pdf/review-of-material-design-and-reactor-engineering-on-tio2-1lszlc3tvl.pdf

Review of material design and reactor engineering on TiO2 photocatalysis for CO2 reduction

Climate change and the consumption of non-renewable resources are considered as the greatest problems facing humankind. Because of this, photocatalysis research has been rapidly expanding. TiO2 nanoparticles have been extensively investigated for photocatalytic applications including the decomposition of organic compounds and production of H2 as a fuel using solar energy. This article reviews the structure and electronic properties of TiO2, compares TiO2 with other common semiconductors used for photocatalytic applications and clarifies the advantages of using TiO2 nanoparticles. TiO2 is considered close to an ideal semiconductor for photocatalysis but possesses certain limitations such as poor absorption of visible radiation and rapid recombination of photogenerated electron/hole pairs. In this review article, various methods used to enhance the photocatalytic characteristics of TiO2 including dye sensitization, doping, coupling and capping are discussed. Environmental and energy applications of TiO2, including photocatalytic treatment of wastewater, pesticide degradation and water splitting to produce hydrogen have been summarized.

/pdf/a-review-of-tio-2-nanoparticles-uttgjgb7p2.pdf

A review of TiO 2 nanoparticles

Preparation and evaluation of stable nanofluids for heat transfer application: A review

TiO2 can be prepared in the form of powder, crystals, or thin films. Liquid-phase processing is one of the most convenient and utilized methods of synthesis. It has the advantage of allowing control over the stoichiometry, production of homogeneous materials, formation of complex shapes, and preparation of composite materials. However, there may be some disadvantages such as expensive precursors, long processing times, and the presence of carbon as an impurity. In comparison, the physical production techniques, although environment friendly, are limited by the size of the produced samples which is not sufficient for a large-scale production. The most commonly used solution routes in the synthesis of TiO2 are reviewed.

/pdf/a-review-on-the-synthesis-of-tio2-nanoparticles-by-solution-1souvm78gi.pdf

A review on the synthesis of TiO2 nanoparticles by solution route

Carbon nanotubes (CNT) represent one of the most unique materials in the field of nanotechnology. CNT are the allotrope of carbon having sp2 hybridization. CNT are considered to be rolled-up graphene with a nanostructure that can have a length to diameter ratio greater than 1,000,000. CNT can be single-, double-, and multi-walled. CNT have unique mechanical, electrical, and optical properties, all of which have been extensively studied. The novel properties of CNT are their light weight, small size with a high aspect ratio, good tensile strength, and good conducting characteristics, which make them useful for various applications. The present review is focused on the structure, properties, toxicity, synthesis methods, growth mechanism and their applications. Techniques that have been developed to synthesize CNT in sizeable quantities, including arc discharge, laser ablation, chemical vapor deposition, etc., have been explained. The toxic effect of CNT is also presented in a summarized form. Recent CNT applications showing a very promising glimpse into the future of CNT in nanotechnology such as optics, electronics, sensing, mechanical, electrical, storage, and other fields of materials science are presented in the review.

Carbon nanotubes: synthesis, properties and engineering applications

The depletion of non-renewable resources and rise in global warming has caused great concern to humankind. With a view to use renewable source of energy and to eliminate hazardous chemical compounds from air, soil, and water, photocatalysis utilizing solar energy is becoming a rapidly expanding technology. Semiconductor nanoparticles have the ability to undergo photoinduced electron transfer to an adsorbed particle governed by the band energy positions of the semiconductor and the redox potential of the adsorbate. A brief overview of metal oxides and sulphides that can act as sensitizers for light-induced redox processes due to their electronic structure is presented here.

Shipra Mital Gupta

Papers

A review of TiO 2 nanoparticles

Preparation and evaluation of stable nanofluids for heat transfer application: A review

A review on the synthesis of TiO2 nanoparticles by solution route

Carbon nanotubes: synthesis, properties and engineering applications

An overview of commonly used semiconductor nanoparticles in photocatalysis