A brief discussion on offshore wind turbine hydrodynamics problem

Modelling the nacelle wake of a horizontal-axis wind turbine under different yaw conditions

Nacelle and tower effect on a stand-alone wind turbine energy output—A discussion on field measurements of a small wind turbine

On a wind farm, the wake has an important impact on the performance of the wind turbines. For example, the wake of an upstream wind turbine affects the blade load and output power of the downstream wind turbine. In this paper, a modified actuator line model with blade tips, root loss, and an airfoil three-dimensional delayed stall was revised. This full-scale modified actuator line model with blades, nacelles, and towers, was combined with a Large Eddy Simulation, and then applied and validated based on an analysis of wind turbine wakes in wind farms. The modified actuator line model was verified using an experimental wind turbine. Subsequently, numerical simulations were conducted on two NREL 5 MW wind turbines with different staggered spacing to study the effect of the staggered spacing on the characteristics of wind turbines. The results show that the output power of the upstream turbine stabilized at 5.9 MW, and the output power of the downstream turbine increased. When the staggered spacing is R and 1.5R, both the power and thrust of the downstream turbine are severely reduced. However, the length of the peaks was significantly longer, which resulted in a long-term unstable power output. As the staggered spacing increased, the velocity in the central near wake of the downstream turbine also increased, and the recovery speed at the threshold of the wake slowed down. The modified actuator line model described herein can be used for the numerical simulation of wakes in wind farms.

/pdf/research-on-the-power-capture-and-wake-characteristics-of-a-trfw5ltz.pdf

Research on the Power Capture and Wake Characteristics of a Wind Turbine Based on a Modified Actuator Line Model

In a large wind farm, the wakes of upstream and downstream wind turbines can interfere with each other, affecting the overall power output of the wind farm. To further improve the numerical accuracy of the turbine wake dynamics under atmosphere turbulence, this work proposes some improvements to the actuator line-large-eddy simulation (AL-LES) method. Based on the dynamic k-equation large-eddy simulation (LES), this method uses a precursor method to generate atmospheric inflow turbulence, models the tower and nacelle wakes, and improves the body force projection method based on an anisotropic Gaussian distribution function. For these three improvements, three wind tunnel experiments are used to validate the numerical accuracy of this method. The results show that the numerical results calculated in the far-wake region can reflect the characteristics of typical onshore and offshore wind conditions compared with the experimental results. After modeling the tower and nacelle wakes, the wake velocity distribution is consistent with the experimental result. The radial migration velocity of the tip vortex calculated by the improved blade body force distribution model is 0.32 m/s, which is about 6% different from the experimental value and improves the prediction accuracy of the tip vortex radial movement. The method proposed in this paper is very helpful for wind turbine wake dynamic analysis and wind farm power prediction.

Shitang Ke

Papers

Recent improvements of actuator line-large-eddy simulation method for wind turbine wakes