An ad-hoc network is the cooperative engagement of a collection of mobile nodes without the required intervention of any centralized access point or existing infrastructure. We present Ad-hoc On Demand Distance Vector Routing (AODV), a novel algorithm for the operation of such ad-hoc networks. Each mobile host operates as a specialized router, and routes are obtained as needed (i.e., on-demand) with little or no reliance on periodic advertisements. Our new routing algorithm is quite suitable for a dynamic self starting network, as required by users wishing to utilize ad-hoc networks. AODV provides loop-free routes even while repairing broken links. Because the protocol does not require global periodic routing advertisements, the demand on the overall bandwidth available to the mobile nodes is substantially less than in those protocols that do necessitate such advertisements. Nevertheless we can still maintain most of the advantages of basic distance vector routing mechanisms. We show that our algorithm scales to large populations of mobile nodes wishing to form ad-hoc networks. We also include an evaluation methodology and simulation results to verify the operation of our algorithm.

/pdf/ad-hoc-on-demand-distance-vector-routing-3w61wv0p1h.pdf

Ad-hoc on-demand distance vector routing

An ad hoc mobile network is a collection of mobile nodes that are dynamically and arbitrarily located in such a manner that the interconnections between nodes are capable of changing on a continual basis. In order to facilitate communication within the network, a routing protocol is used to discover routes between nodes. The primary goal of such an ad hoc network routing protocol is correct and efficient route establishment between a pair of nodes so that messages may be delivered in a timely manner. Route construction should be done with a minimum of overhead and bandwidth consumption. This article examines routing protocols for ad hoc networks and evaluates these protocols based on a given set of parameters. The article provides an overview of eight different protocols by presenting their characteristics and functionality, and then provides a comparison and discussion of their respective merits and drawbacks.

/pdf/a-review-of-current-routing-protocols-for-ad-hoc-mobile-162irnf6ec.pdf

A review of current routing protocols for ad hoc mobile wireless networks

This paper describes two techniques that improve throughput in an ad hoc network in the presence of nodes that agree to forward packets but fail to do so. To mitigate this problem, we propose categorizing nodes based upon their dynamically measured behavior. We use a watchdog that identifies misbehaving nodes and a pathrater that helps routing protocols avoid these nodes. Through simulation we evaluate watchdog and pathrater using packet throughput, percentage of overhead (routing) transmissions, and the accuracy of misbehaving node detection. When used together in a network with moderate mobility, the two techniques increase throughput by 17% in the presence of 40% misbehaving nodes, while increasing the percentage of overhead transmissions from the standard routing protocol's 9% to 17%. During extreme mobility, watchdog and pathrater can increase network throughput by 27%, while increasing the overhead transmissions from the standard routing protocol's 12% to 24%.

/pdf/mitigating-routing-misbehavior-in-mobile-ad-hoc-networks-3fdj9bxaq3.pdf

Mitigating routing misbehavior in mobile ad hoc networks

Ad hoc networks are a new wireless networking paradigm for mobile hosts. Unlike traditional mobile wireless networks, ad hoc networks do not rely on any fixed infrastructure. Instead, hosts rely on each other to keep the network connected. Military tactical and other security-sensitive operations are still the main applications of ad hoc networks, although there is a trend to adopt ad hoc networks for commercial uses due to their unique properties. One main challenge in the design of these networks is their vulnerability to security attacks. In this article, we study the threats on ad hoc network faces and the security goals to be achieved. We identify the new challenges and opportunities posed by this new networking environment and explore new approaches to secure its communication. In particular, we take advantage of the inherent redundancy in ad hoc networks-multiple routes between nodes-to defend routing against denial-of-service attacks. We also use replication and new cryptographic schemes, such as threshold cryptography, to build a highly secure and highly available key management service, which terms the core of our security framework.

/pdf/securing-ad-hoc-networks-3hudjv4io2.pdf

Securing ad hoc networks

We present a new distributed routing protocol for mobile, multihop, wireless networks. The protocol is one of a family of protocols which we term "link reversal" algorithms. The protocol's reaction is structured as a temporally-ordered sequence of diffusing computations; each computation consisting of a sequence of directed link reversals. The protocol is highly adaptive, efficient and scalable; being best-suited for use in large, dense, mobile networks. In these networks, the protocol's reaction to link failures typically involves only a localized "single pass" of the distributed algorithm. This capability is unique among protocols which are stable in the face of network partitions, and results in the protocol's high degree of adaptivity. This desirable behavior is achieved through the novel use of a "physical or logical clock" to establish the "temporal order" of topological change events which is used to structure (or order) the algorithm's reaction to topological changes. We refer to the protocol as the temporally-ordered routing algorithm (TORA).

/pdf/a-highly-adaptive-distributed-routing-algorithm-for-mobile-4j6kya5jhp.pdf

A highly adaptive distributed routing algorithm for mobile wireless networks

We present the Wireless Routing Protocol (WRP). In WRP, routing nodes communicate the distance and second-to-last hop for each destination. WRP reduces the number of cases in which a temporary routing loop can occur, which accounts for its fast convergence properties. A detailed proof of correctness is presented and its performance is compared by simulation with the performance of the distributed Bellman-Ford Algorithm (DBF), DUAL (a loop-free distance-vector algorithm) and an Ideal Link-state Algorithm (ILS), which represent the state of the art of internet routing. The simulation results indicate that WRP is the most efficient of the alternatives analyzed.

/pdf/an-efficient-routing-protocol-for-wireless-networks-1kabpw6bop.pdf

An efficient routing protocol for wireless networks

A multi-layer network element (12) for forwarding received packets from an input port to one or more output ports (38) with quality of service. When output queues (54) exceed or meet a threshold value below the queue's capacity packets are randomly discarded. When the queue becomes full, the network element determines which flow caused the queue to overflow. The priority of that flow is lowered. In a multicast packet, the packet may have different priorities at each output port. Scheduling of multiple output queues at each output port uses a weight round robin approach that allocates a weight portion of packets to transmit at each time interval. A packet is not interrupted during its transmission, even if the weight portion is met during a packet's transmission. The excess number of bytes transmitted as a result of not interrupting the packet are accounted for in the next round.

A system and method for a quality of service in a multi-layer network element

A switch fabric (210) provides access to a forwarding database (140) on behalf of a processor (161). The switch fabric (210) includes a memory access interface configured to arbitrate access to a forwarding database (140) memory. The switch fabric (210) also includes a search engine coupled to the memory access interface and to multiple input ports (140). The search engine is configured to schedule and perform accesses to the forwarding database (140) memory and to transfer forwarding decisions retrieved therefrom to the input ports (205). The switch fabric (210) further includes command execution logic that is configured to interface with the processor (161) for performing forwarding database (140) accesses requested by the processor. One or more commands are provided for 1) learning a supplied address; 2) reading associated data corresponding to a search key; 3) ageing forwarding database (140) entries; 4) invalidating entries; (5) accessing mask data; 6) replacing forwarding database (140) entries; and 7) accessing entries in the forwarding database (140).

Hardware-assisted central processing unit access to a forwarding database

A multi-layer network element for forwarding received packets from an input port to one or more output ports. The packet is examined to look for first and second forwarding information. A packet is also assigned to a class and provided with default packet forwarding information. An associative memory is searched once for each type of information. The results from the two searches are combined with the default packet forwarding information to forward the packet to the appropriate one or more output ports. In some instances, the results of the first search dominate the forwarding decision, in other, the results of the second search dominate the forwarding decision, and in still other instances, the default information dominates.

A system and method for a multi-layer network elememt

: The authors present a new distance-vector routing protocol for a packet radio network. The new distributed routing protocol, Wireless Routing Protocol (WRP), works on the notion of second-to-last hop node to a destination. WRP reduces the number of cases in which a temporary routing loop can occur and also provides a mechanism for the reliable transmission of update messages. The performance of WRP has been compared quantitatively by simulations with that of distributed Bellman-Ford (DBF), DUAL (a loop-free, distance-vector algorithm), and an ideal link-state algorithm (ILS) that represents the state of the art of Internet routing in a highly dynamic environment. The simulation results indicate that WRP is the most efficient of the algorithms simulated in a wireless environment.

Shree Murthy

Papers

An efficient routing protocol for wireless networks

A system and method for a quality of service in a multi-layer network element

Hardware-assisted central processing unit access to a forwarding database

A system and method for a multi-layer network elememt

A routing protocol for packet radio networks