In this paper, a new single-phase cascaded multilevel inverter is proposed. This inverter is comprised of a series connection of the proposed basic unit and is able to only generate positive levels at the output. Therefore, an H-bridge is added to the proposed inverter. This inverter is called the developed cascaded multilevel inverter. In order to generate all voltage levels (even and odd) at the output, four different algorithms are proposed to determine the magnitude of dc voltage sources. Reduction in the number of power switches, driver circuits, and dc voltage sources is the advantage of the developed single-phase cascaded multilevel inverter. As a result, the installation space and cost of the inverter are reduced. These features are obtained by the comparison of the conventional cascaded multilevel inverters with the proposed cascaded topology. The ability of the proposed inverter to generate all voltage levels (even and odd) is reconfirmed by using the experimental results of a 15-level inverter.

A Single-Phase Cascaded Multilevel Inverter Based on a New Basic Unit With Reduced Number of Power Switches

Multilevel inverters (MLIs) are being used in wide range of power electronic applications. These converters have attracted a lot of attention during recent years and exist in different topologies with similar basic concepts. This paper presents five main submodules (SMs) to be used as the basic structures of MLIs. The paper reviews the common MLI topologies from the structural point of view. The topologies are divided into the different SMs to show conventional MLI configurations and future topologies that can be created from the main SMs. A comparative study between different topologies is performed in detail. The MLIs are categorized and investigated with from different perspectives such as the number of components, the ability to create inherent negative voltage, working in regeneration mode and using single dc source.

A General Review of Multilevel Inverters Based on Main Submodules: Structural Point of View

In this paper, a new single-phase cascaded multilevel inverter based on novel H-bridge units is proposed. In order to generate all voltage levels (even and odd) at the output, nine different algorithms are proposed to determine the magnitudes of dc voltage sources. Then, the proposed algorithms are compared to investigate their advantages and disadvantages. This topology is able to increase the number of output voltage levels by using a lower number of power electronic devices such as switches, power diodes, driver circuits, and dc voltage sources that lead to reduction in installation space and cost of the inverter. In addition, in the proposed cascaded multilevel inverter, not only the number of required power electronic devices is reduced, but also the amount of the blocked voltage by switches, and the number of different voltage amplitudes of the used sources is decreased. These features are some of the most important advantages of the proposed topology. These features are obtained via the comparison of the proposed topology and its proposed algorithms with the conventional cascaded multilevel inverters that have been presented in the literatures. The operation and performances of the proposed topology with its presented algorithms in generating all voltage levels have been verified by using the experimental results of a 49-level single-phase inverter.

Cascaded Multilevel Inverter With Series Connection of Novel H-Bridge Basic Units

This paper introduces a new module for asymmetrical multilevel inverters with a low number of components. The module is a square combination of two back-to-back T-type inverters and some other switches. A square T-type module produces 17 levels by 12 switches and 4 unequal dc sources (two 3 V DC and two 1 V DC). Also, it can be extended as a cascade connection in two strategies to achieve more levels. The module and its cascade connection are suitable for the applications in several dc sources systems such as photovoltaic farms, which lead to a modular topology with more voltage levels at higher voltages. Inherent creation of the negative voltage levels without any additional circuit (such as H-bridge circuit) is one of the main features of the proposed module. The low total harmonic distortion of the output voltage/current and low number of semiconductors are among the other advantages of the proposed module. A nearest level control method as a switching technique is used to produce high quality output voltage with lower harmonic contents. Simulations have been performed in MATLAB/Simulink and a prototype is implemented in the Power Electronics Laboratory; both the simulation and experimental results show a good performance.

A Square T-Type (ST-Type) Module for Asymmetrical Multilevel Inverters

Recently multilevel inverters (MLI) have attracted more attention in research and industry, as they are changing into a viable technology for several applications. The concept of MLI was introduced for high power and high/medium voltage applications as they can provide an effective interface with renewable energy sources. Developing of reduced switch MLI topology has been a rapid research topic since the past decade, which has not been reviewed so far. Therefore, this review article focuses on the different reduced switch MLI topologies under three categories such as symmetric, asymmetric and hybrid configurations. The important knowledge on these topologies is carefully tabulated based on the three categories in the comparison tables to understand the essential parameters of the MLI topologies. These configurations are not only generating higher voltage levels to improve the power quality but also to reduce the passive filter requirements. Also, this review includes a detailed perspective of various modulation techniques and control strategies for MLI topologies. In addition to that, the different performance parameters of MLI and its calculation methods are discussed with appropriate mathematical expression. This review will help in the selection of appropriate MLI topology for FACTS, motor drives and renewable applications.

A comprehensive review on reduced switch multilevel inverter topologies, modulation techniques and applications

In this paper, a new general cascaded multilevel inverter using developed H-bridges is proposed. The proposed topology requires a lesser number of dc voltage sources and power switches and consists of lower blocking voltage on switches, which results in decreased complexity and total cost of the inverter. These abilities obtained within comparing the proposed topology with the conventional topologies from aforementioned points of view. Moreover, a new algorithm to determine the magnitude of dc voltage sources is proposed. The performance and functional accuracy of the proposed topology using the new algorithm in generating all voltage levels for a 31-level inverter are confirmed by simulation and experimental results.

Somayeh Alilu

Papers

A New General Topology for Cascaded Multilevel Inverters With Reduced Number of Components Based on Developed H-Bridge

Cascaded Multilevel Inverter With Series Connection of Novel H-Bridge Basic Units