ion. The oxidative addition mechanism was originally proposed22i because of the lack of a strong rate dependence on polar factors and on the acidity of the medium. Later, however, the electrophilic substitution mechanism also was proposed. Recently, the oxidative addition mechanism was confirmed by investigations into the decomposition and protonolysis of alkylplatinum complexes, which are the reverse of alkane activation. There are two routes which operate in the decomposition of the dimethylplatinum(IV) complex Cs2Pt(CH3)2Cl4. The first route leads to chloride-induced reductive elimination and produces methyl chloride and methane. The second route leads to the formation of ethane. There is strong kinetic evidence that the ethane is produced by the decomposition of an ethylhydridoplatinum(IV) complex formed from the initial dimethylplatinum(IV) complex. In D2O-DCl, the ethane which is formed contains several D atoms and has practically the same multiple exchange parameter and distribution as does an ethane which has undergone platinum(II)-catalyzed H-D exchange with D2O. Moreover, ethyl chloride is formed competitively with H-D exchange in the presence of platinum(IV). From the principle of microscopic reversibility it follows that the same ethylhydridoplatinum(IV) complex is the intermediate in the reaction of ethane with platinum(II). Important results were obtained by Labinger and Bercaw62c in the investigation of the protonolysis mechanism of several alkylplatinum(II) complexes at low temperatures. These reactions are important because they could model the microscopic reverse of C-H activation by platinum(II) complexes. Alkylhydridoplatinum(IV) complexes were observed as intermediates in certain cases, such as when the complex (tmeda)Pt(CH2Ph)Cl or (tmeda)PtMe2 (tmeda ) N,N,N′,N′-tetramethylenediamine) was treated with HCl in CD2Cl2 or CD3OD, respectively. In some cases H-D exchange took place between the methyl groups on platinum and the, CD3OD prior to methane loss. On the basis of the kinetic results, a common mechanism was proposed to operate in all the reactions: (1) protonation of Pt(II) to generate an alkylhydridoplatinum(IV) intermediate, (2) dissociation of solvent or chloride to generate a cationic, fivecoordinate platinum(IV) species, (3) reductive C-H bond formation, producing a platinum(II) alkane σ-complex, and (4) loss of the alkane either through an associative or dissociative substitution pathway. These results implicate the presence of both alkane σ-complexes and alkylhydridoplatinum(IV) complexes as intermediates in the Pt(II)-induced C-H activation reactions. Thus, the first step in the alkane activation reaction is formation of a σ-complex with the alkane, which then undergoes oxidative addition to produce an alkylhydrido complex. Reversible interconversion of these intermediates, together with reversible deprotonation of the alkylhydridoplatinum(IV) complexes, leads to multiple H-D exchange

Activation of c-h bonds by metal complexes

Over the last decade, substantial research has led to the introduction of an impressive number of efficient procedures which allow the selective construction of CC bonds by directly connecting two different CH bonds under oxidative conditions. Common to these methodologies is the generation of the reactive intermediates in situ by activation of both CH bonds. This strategy was introduced by the group of Li as cross-dehydrogenative coupling (CDC) and discloses waste-minimized synthetic alternatives to classic coupling procedures which rely on the use of prefunctionalized starting materials. This Review highlights the recent progress in the field of cross-dehydrogenative C sp 3C formations and provides a comprehensive overview on existing procedures and employed methodologies.

The Cross-Dehydrogenative Coupling of C sp 3H Bonds: A Versatile Strategy for CC Bond Formations

Recent advances in transition metal catalyzed oxidation of organic substrates with molecular oxygen.

The chemistry of copper is extremely rich because it can easily access Cu0, CuI, CuII, and CuIII oxidation states allowing it to act through one-electron or two-electron processes. As a result, both radical pathways and powerful two-electron bond forming pathways via organmetallic intermediates, similar to those of palladium, can occur. In addition, the different oxidation states of copper associate well with a large number of different functional groups via Lewis acid interactions or π-coordination. In total, these feature confer a remarkably broad range of activities allowing copper to catalyze the oxidation and oxidative union of many substrates.

Oxygen is a highly atom economical, environmentally benign, and abundant oxidant, which makes it ideal in many ways.1 The high activation energies in the reactions of oxygen require that catalysts be employed.2 In combination with molecular oxygen, the chemistry of copper catalysis increases exponentially since oxygen can act as either a sink for electrons (oxidase activity) and/or as a source of oxygen atoms that are incorporated into the product (oxygenase activity). The oxidation of copper with oxygen is a facile process allowing catalytic turnover in net oxidative processes and ready access to the higher CuIII oxidation state, which enables a range of powerful transformations including two-electron reductive elimination to CuI. Molecular oxygen is also not hampered by toxic byproducts, being either reduced to water, occasionally via H2O2 (oxidase activity) or incorporated into the target structure with high atom economy (oxygenase activity). Such oxidations using oxygen or air (21% oxygen) have been employed safely in numerous commodity chemical continuous and batch processes.3

However, batch reactors employing volatile hydrocarbon solvents require that oxygen concentrations be kept low in the head space (typically <5–11%) to avoid flammable mixtures, which can limit the oxygen concentration in the reaction mixture.4,5,6 A number of alternate approaches have been developed allowing oxidation chemistry to be used safely across a broader array of conditions. For example, use of carbon dioxide instead of nitrogen as a diluent leads to reduced flammability.5 Alternately, water can be added to moderate the flammability allowing even pure oxygen to be employed.6 New reactor designs also allow pure oxygen to be used instead of diluted oxygen by maintaining gas bubbles in the solvent, which greatly improves reaction rates and prevents the build up of higher concentrations of oxygen in the head space.4a,7 Supercritical carbon dioxide has been found to be advantageous as a solvent due its chemical inertness towards oxidizing agents and its complete miscibility with oxygen or air over a wide range of temperatures.8 An number of flow technologies9 including flow reactors,10 capillary flow reactors,11 microchannel/microstructure structure reactors,12 and membrane reactors13 limit the amount of or afford separation of hydrocarbon/oxygen vapor phase thereby reducing the potential for explosions.

Enzymatic oxidizing systems based upon copper that exploit the many advantages and unique aspects of copper as a catalyst and oxygen as an oxidant as described in the preceding paragraphs are well known. They represent a powerful set of catalysts able to direct beautiful redox chemistry in a highly site-selective and stereoselective manner on simple as well as highly functionalized molecules. This ability has inspired organic chemists to discover small molecule catalysts that can emulate such processes. In addition, copper has been recognized as a powerful catalyst in several industrial processes (e.g. phenol polymerization, Glaser-Hay alkyne coupling) stimulating the study of the fundamental reaction steps and the organometallic copper intermediates. These studies have inspiried the development of nonenzymatic copper catalysts. For these reasons, the study of copper catalysis using molecular oxygen has undergone explosive growth, from 30 citations per year in the 1980s to over 300 citations per year in the 2000s.

A number of elegant reviews on the subject of catalytic copper oxidation chemistry have appeared. Most recently, reviews provide selected coverage of copper catalysts14 or a discussion of their use in the aerobic functionalization of C–H bonds.15 Other recent reviews cover copper and other metal catalysts with a range of oxidants, including oxygen, but several reaction types are not covered.16 Several other works provide a valuable overview of earlier efforts in the field.17 This review comprehensively covers copper catalyzed oxidation chemistry using oxygen as the oxidant up through 2011. Stoichiometric reactions with copper are discussed, as necessary, to put the development of the catalytic processes in context. Mixed metal systems utilizing copper, such as palladium catalyzed Wacker processes, are not included here. Decomposition reactions involving copper/oxygen and model systems of copper enzymes are not discussed exhaustively. To facilitate analysis of the reactions under discussion, the current mechanistic hypothesis is provided for each reaction. As our understanding of the basic chemical steps involving copper improve, it is expected that many of these mechanisms will evolve accordingly.

/pdf/aerobic-copper-catalyzed-organic-reactions-3ctljpvivz.pdf

Aerobic Copper-Catalyzed Organic Reactions

Metal organic frameworks (MOFs) are a class of porous crystalline materials that feature a series of unique properties, such as large surface area and porosity, high content of transition metals, and possibility to be designed and modified after synthesis, that make these solids especially suitable as heterogeneous catalysts. The active sites can be coordinatively unsaturated metal ions, substituents at the organic linkers or guest species located inside the pores. The defects on the structure also create these open sites. The present review summarizes the current state of the art in the use of MOFs as solid catalysts according to the type of site, making special emphasis on the more recent strategies to increase the population of these active sites and tuning their activity, either by adapting the synthesis conditions or by post-synthetic modification. This review highlights those reports illustrating the synergy derived from the presence of more than one of these types of sites, leading to activation of a substrate by more than one site or to the simultaneous activation of different substrates by complementary sites. This synergy is frequently the main reason for the higher catalytic activity of MOFs compared to homogeneous catalysts or other alternative solid materials. Besides dark reactions, this review also summarizes the use of MOFs as photocatalysts emphasizing the uniqueness of these materials regarding adaptation of the linkers as light absorbers and metal exchange at the nodes to enhance photoinduced electron transfer, in comparison with conventional inorganic photocatalysts. This versatility and flexibility that is offered by MOFs to optimize their visible light photocatalytic activity explains the current interest in exploiting these materials for novel photocatalytic reactions, including hydrogen evolution and photocatalytic CO2 reduction.

Catalysis and photocatalysis by metal organic frameworks

An innovation of the aerobic oxidation of hydrocarbons through catalytic carbon radical generation under mild conditions was achieved by using N-hydroxyphthalimide (NHPI) as a key compound. Alkanes were successfully oxidized with O2 or air to valuable oxygen-containing compounds such as alcohols, ketones, and dicarboxylic acids by the combined catalytic system of NHPI and a transition metal such as Co or Mn. The NHPI-catalyzed oxidation of alkylbenzenes with dioxygen could be performed even under normal temperature and pressure of dioxygen. Xylenes and methylpyridines were also converted into phthalic acids and pyridinecarboxylic acids, respectively, in good yields. The present oxidation method was extended to the selective transformations of alcohols to carbonyl compounds and of alkynes to ynones. The epoxidation of alkenes using hydroperoxides or H2O2 generated in situ from hydrocarbons or alcohols and O 2 under the influence of the NHPI was demonstrated and seems to be a useful strategy for industrial applications. The NHPI method is applicable to a wide variety of organic syntheses via carbon radical intermediates. The catalytic carboxylation of alkanes was accomplished by the use of CO and O2 in the presence of NHPI. In addition, the reactions of alkanes with NO2 and SO2 catalyzed by NHPI provided efficient methods for the synthesis of nitroalkanes and sulfonic acids, respectively. A catalytic carbon-carbon bond forming reaction was achieved by allowing carbon radicals generated in situ from alkanes or alcohols to react with alkenes under mild conditions.

1 Introduction

2 Discovery of NHPI as Carbon Radical Producing Catalyst from Alkanes

2.1 Historical Background

2.2 Catalysis of NHPI in Aerobic Oxidation

3 NHPI-Catalyzed Aerobic Oxidation

3.1 Oxidation of Benzylic Compounds

3.2 Alkane Oxidations with Molecular Oxygen

3.3 Oxidation of Alkylbenzenes

3.4 Practical Oxidation of Methylpyridines

3.5 Preparation of Acetylenic Ketones via Alkyne Oxidation

3.6 Oxidation of Alcohols

3.7 Selective Oxidation of Sulfides to Sulfoxides

3.8 Production of Hydrogen Peroxide by Aerobic Oxidation of Alcohols

3.9 Epoxidation of Alkenes using Molecular Oxygen as Terminal Oxidant

4 Carboxylation of Alkanes with CO and O2

5 Utilization of NOx in Organic Synthesis

5.1 First Catalytic Nitration of Alkanes using NO2

5.2 Reaction of NO with Organic Compounds

6 Sulfoxidation of Alkanes Catalyzed by Vanadium

7 Carbon-Carbon Bond Forming Reaction via Catalytic Carbon Radicals Generated from Various Organic Compounds Assisted by NHPI

7.1 Oxyalkylation of Alkenes with Alkanes and Dioxygen

7.2 Synthesis of α-Hydroxy-γ-lactones by Addition of α-Hydroxy Carbon Radicals to Unsaturated Esters

7.3 Hydroxyacylation of Alkenes using 1,3-Dioxolanes and Dioxygen

8 Conclusions

Innovation of Hydrocarbon Oxidation with Molecular Oxygen and Related Reactions

A practical catalytic method to convert alkylbenzenes into the corresponding carboxylic acids under atmospheric dioxygen at ambient temperature using a combined catalytic system consisting of N-hydroxyphthalimide (NHPI) and Co(OAc)2 was developed. For instance, the oxidation of toluene was completed by NHPI combined with Co(OAc)2 under an oxygen atmosphere at room temperature to give benzoic acid in 81% yield. Under these conditions, o- and p-xylenes were selectively converted into the corresponding monocarboxylic acids without the formation of the dicarboxylic acids. ESR measurements showed that Co(II) species assists in the formation of phthalimide-N-oxyl (PINO), which is a key species in this oxidation, from NHPI.

Catalytic Oxidation of Alkylbenzenes with Molecular Oxygen under Normal Pressure and Temperature by N-Hydroxyphthalimide Combined with Co(OAc)2

A novel class of catalysts for alkane oxidation with molecular oxygen was examined. N-Hydroxyphthalimide (NHPI) combined with Co(acac)n (n = 2 or 3) was found to be an efficient catalytic system for the aerobic oxidation of cycloalkanes and alkylbenzenes under mild conditions. Cycloalkanes were successfully oxidized with molecular oxygen in the presence of a catalytic amount of NHPI and Co(acac)2 in acetic acid at 100 °C to give the corresponding cycloalkanones and dicarboxylic acids. Alkylbenzenes were also oxidized with dioxygen using this catalytic system. For example, toluene was converted into benzoic acid in excellent yield under these conditions. Ethyl- and butylbenzenes were selectively oxidized at their α-positions to form the corresponding ketones, acetophenone, and 1-phenyl-1-butanone, respectively, in good yields. A key intermediate in this oxidation is believed to be the phthalimide N-oxyl radical generated from NHPI and molecular oxygen using a Co(II) species. The isotope effect (kH/kD) in t...

Alkane Oxidation with Molecular Oxygen Using a New Efficient Catalytic System: N-Hydroxyphthalimide (NHPI) Combined with Co(acac)(n)() (n = 2 or 3).

Novel Catalysis by N-Hydroxyphthalimide in the Oxidation of Organic Substrates by Molecular Oxygen

Highly efficient catalytic oxidation of alcohols with molecular oxygen by N-hydroxyphthalimide (NHPI) combined with a Co species was developed. The oxidation of 2-octanol in the presence of catalytic amounts of NHPI and Co(OAc)2 under atmospheric dioxygen in AcOEt at 70 °C gave 2-octanone in 93% yield. The oxidation was significantly enhanced by adding a small amount of benzoic acid to proceed smoothly even at room temperature. Primary alcohols were oxidized by NHPI in the absence of any metal catalyst to form the corresponding carboxylic acids in good yields. In the oxidation of terminal vic-diols such as 1,2-butanediol, carbon−carbon bond cleavage was induced to give one carbon less carboxylic acids such as propionic acid, while internal vic-diols were selectively oxidized to 1,2-diketones.

Takahiro Iwahama

Papers

Innovation of Hydrocarbon Oxidation with Molecular Oxygen and Related Reactions

Catalytic Oxidation of Alkylbenzenes with Molecular Oxygen under Normal Pressure and Temperature by N-Hydroxyphthalimide Combined with Co(OAc)2

Alkane Oxidation with Molecular Oxygen Using a New Efficient Catalytic System: N-Hydroxyphthalimide (NHPI) Combined with Co(acac)(n)() (n = 2 or 3).

Novel Catalysis by N-Hydroxyphthalimide in the Oxidation of Organic Substrates by Molecular Oxygen

Efficient Oxidation of Alcohols to Carbonyl Compounds with Molecular Oxygen Catalyzed by N-Hydroxyphthalimide Combined with a Co Species