Mechanism of eutectic formation upon compaction and its effects on tablet properties

Heat transfer - A review of 2001 literature

Experimental investigation of contact resistance in adsorber of solar adsorption refrigeration

This work discusses some of the benefits, techniques, challenges, and considerations associated with the incorporation of measured surfaces in finite element (FE) models including how much surface data to measure and import into the model, the shape of the surface geometry to create, the presence and effect of surface layers and impurities, the required mesh density for rough surfaces, the nature of the element formulations and material properties at small length scales, the differences between measurement and FE coordinate systems, the limitations and idealizations of the FE method, issues associated with boundary conditions and their ability to impose or prevent conformal contact, and issues associated with the size of the pinball region and the contact stiffness relative to the nature of the surface. It also describes some current and future research directions that can be used to validate and expand existing techniques and to improve our understanding of surface phenomena.

Considerations for the Incorporation of Measured Surfaces in Finite Element Models

Considerations for the incorporation of measured surfaces in finite element models

Essentially all models for prediction of thermal contact conductance or thermal contact resistance have assumed optically flat surfaces for simplification. A few thermal constriction models have been developed which incorporate uncoated, optically non-flat surfaces based on the bulk mechanical properties of the material. Investigations have also been conducted which incorporate the thermophysical properties of metallic coatings and their effective surface microhardness to predict the overall thermal contact conductance. However, these studies and subsequent models have also assumed optically flat surfaces; thus, the application of these models to optically non-flat, coated surface conditions is not feasible without modifications. The present investigation develops a thermomechanical model that combines both microscopic and macroscopic thermal resistances for non-flat, roughened, surfaces with non-metallic coatings. The thermomechanical model developed as a result of this study predicts the thermal contact resistance of several non-metallic coatings deposited on metallic aluminum substrates quite well

Thomas A. Dietz

Papers

Thermal Contact Resistance Modeling of Non-Flat, Roughened Surfaces With Non-Metallic Coatings